How to set digital terrestrial (DTT) channels on HISENSE TV LED H50A6550
When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV HISENSE TV LED H50A6550.
This setting consists of a channel search on your HISENSE TV LED H50A6550 so that these are received by your TV.
In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.
Automatic channel search without DTT adapter on HISENSE TV LED H50A6550
If you do not have a DTT adapter, here’s how to proceed: start by turning on your HISENSE TV LED H50A6550, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your HISENSE TV LED H50A6550.
For the next steps, please do not select “update” on your HISENSE TV LED H50A6550!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of HISENSE TV LED H50A6550, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your HISENSE TV LED H50A6550.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Automatic channel search with DTT adapter via HISENSE TV LED H50A6550
If you have a DTT adapter, here’s how to proceed: start by turning on your HISENSE TV LED H50A6550, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.
Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on your model.
Find all the information about HISENSE TV LED H50A6550 in our articles.
During the next steps, please do not select “update” on your HISENSE TV LED H50A6550 as previously stated!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your HISENSE TV LED H50A6550.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Manual channel search on your HISENSE TV LED H50A6550
It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on HISENSE TV LED H50A6550 is your solution! However, it is a complicated manipulation that takes a little more time.
If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.
If you do not have one, use the remote control of your HISENSE TV LED H50A6550.
Retrieve channel’s canal number
To start the operation, you must have the canal number of the channel you wish to search manually on your HISENSE TV LED H50A6550.
To do this, use the “My DTT coverage” search engine on the Ofcom official website.
Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.
You may then be able to watch it on your HISENSE TV LED H50A6550.
Start manual channel search on HISENSE TV LED H50A6550
Start by pressing “Menu” and go to “Configuration”.
It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.
Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.
The hardest is done, you can now go check the presence of the channel on your HISENSE TV LED H50A6550!
To conclude on setting channels on your HISENSE TV LED H50A6550
We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your HISENSE TV LED H50A6550.
However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.
Does my Hisense TV have a digital tuner?
A.
Yes, you can still use the TV if it’s not connected to the Internet.
The TV has a built-in tuner to enjoy free over-the-air channels with an antenna. Q.
How do I unlock DTV channels on my Hisense TV?
What are DTT channels?
Digital terrestrial television (DTTV or DTT, or DTTB with “broadcasting”) is a technology for terrestrial television in which land-based (terrestrial) television stations broadcast television content by radio waves to televisions in consumers’ residences in a digital format.
How do I set satellite channels on my Hisense TV?
– Tap the Hamburger icon on the remote.
– Select “Settings”
– Select “Channel”
– Make sure “Tuner Mode” is set to “Antenna.” ( It should be by default)
– Select “Auto Channel Scan”
HiSense LED TV (H40BE5000) – Change Dish Setup
7 ancillary questions
How do you manually change channels on a Hisense TV?
1. Use the Buttons on the Hisense TV.
Almost all Hisense TVs contain buttons for power, volume, channel, and configuration adjustments.
These buttons can be pressed at any time to operate a Hisense TV without a remote.
How do I set satellite channels on my Hisense TV?
– Press Quick menu.
– Scroll to Settings and press OK.
– Scroll to Channel and press OK.
– Scroll to Auto Scan and press OK.
– Select Change Setup and press OK.
– Select Satellite and press OK.
– Press Right using the Directional buttons.
– Select your Satellite mode (E.g.
Single Satellite) and press OK.
Why is my TV not finding analog channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.
If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
Turn On the TV Using the Power Button Like all TVs, Hisense TVs feature a physical Power button. While it may not be visible, it’s also not hard to locate.
Is Hisense TV digital or analog?
Hisense 32A5200F is a good Frameless Full HDTV that comes with a digital Tuner.
The digital Tuner will allow your TV to receive digital TV signals broadcast over the air by Local TV stations.
It does not require Internet connectivity to play.
– Make sure your TV is plugged in.
– Look for the red light on your Hisense TV.
– Press the button underneath the TV on the same line as the red light.
How do I know if my TV is digital or analog?
You may also be interested in the following articles:
- How to update HISENSE TV LED H65A6500
- How to go online with a HISENSE TV LED H55A6550
- How to connect headphones to HISENSE H55U7A Ultra HD Smart TV
You still have issues? Our team of experts and passionate could help you, feel free to contact us.