How to reset the sound and audio settings on PHILIPS TV LED 49PUS8303
Sometimes the sound or audio system of your PHILIPS TV LED 49PUS8303 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your PHILIPS TV LED 49PUS8303. We will see in this article solutions for each problem stated above.
A “beep” sound from your PHILIPS TV LED 49PUS8303
When you turn on your PHILIPS TV LED 49PUS8303, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your PHILIPS TV LED 49PUS8303. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on PHILIPS TV LED 49PUS8303, you must disassemble to the back of your PHILIPS TV LED 49PUS8303 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your PHILIPS TV LED 49PUS8303
The first simple step in this case is to check if your TV, model PHILIPS TV LED 49PUS8303, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your PHILIPS TV LED 49PUS8303.
Find all the information about PHILIPS TV LED 49PUS8303 in our articles.
Offset sound on PHILIPS TV LED 49PUS8303
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV PHILIPS TV LED 49PUS8303.
Shifted sound from your PHILIPS TV LED 49PUS8303 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your PHILIPS TV LED 49PUS8303, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your PHILIPS TV LED 49PUS8303, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your PHILIPS TV LED 49PUS8303
Some TVs like your PHILIPS TV LED 49PUS8303 have a “Sound delay” option.
If this has been set on your PHILIPS TV LED 49PUS8303, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on PHILIPS TV LED 49PUS8303
We have just seen how to reset the sound on TV PHILIPS TV LED 49PUS8303.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your PHILIPS TV LED 49PUS8303.
How do I adjust the Sound on my Philips TV?
How do I reset the Sound on my Philips TV?
Press the “Home” button on the remote control and select: [Setup/quick settings] >[Sound] > [Advanced]> [TV speakers] > [On] and press “OK”. For Android TVs, press the “Settings” button on the remote control and select: [Speakers] > [On] and press “OK”.
Where is audio settings on TV?
– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.
How to Reset your Philips TV
8 ancillary questions
Why is there suddenly no sound on my Samsung TV?
On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.
Select Sound Test and wait for the test to finish.
If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.
How do I reset my Philips TV if it wont turn on?
How do I reset the sound on my Philips Smart TV?
Why would the sound suddenly stop working on my TV?
Check the audio settings on your TV and connected devices.
Turn off and unplug your TV and connected devices.
Inspect the TV cables and ports, then check the ones on your devices as well.
Are they connected correctly and firmly?May 11, 2021
How do I fix the distorted sound on my TV?
1 The issue may be related to a particular channel or audio-video file.
Try a different channel of play another video to check if this is the case.
2 Set TV volume between 50~60 & increase and decrease the volume from STB (Set Top Box) remote.
3 Perform the sound test to check the sound quality.
How do I manually reset my Philips TV?
– Step 1: go to the home screen.
– Step 2: go to settings.
– Step 3: go to general settings.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
How do I fix my TV if my screen is black but still works?
Replace the HDMI cable as it may have a short or another defect which causes the black screen issue.
Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues.
Factory reset of the TV to resolve the issue.
How do I fix the sound quality on my TV?
– Changing your TV’s sound mode can often improve quality.
– Your TV’s equalizer settings let you take control and configure the sound the way you want it.
– Advanced sound processing modes may improve audio quality, so experiment turning them on or off.
You may also be interested in the following articles:
- How to reset a normal color on PHILIPS TV 32PHS4032
- How to stop or activate audiodescription on PHILIPS TV LED 32PFS5603
- How to unlock your PHILIPS TV 65PUS6262
You still have issues? Our team of experts and passionate could help you, feel free to contact us.