How to reset a normal color on your PHILIPS TV 32PHS4032
You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 32PHS4032 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 32PHS4032. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 32PHS4032.
SCART on your PHILIPS TV 32PHS4032
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PHILIPS TV 32PHS4032 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PHILIPS TV 32PHS4032 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PHILIPS TV 32PHS4032 in our articles.
Do not panic ! Here is how to reset a normal color on your PHILIPS TV 32PHS4032 with standard TV settings.
Take the remote control of your PHILIPS TV 32PHS4032, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PHILIPS TV 32PHS4032. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 32PHS4032.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 32PHS4032, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 32PHS4032.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PHILIPS TV 32PHS4032
Finally, the capacitors may be at fault when the colors of your PHILIPS TV 32PHS4032 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 32PHS4032, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PHILIPS TV 32PHS4032 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 32PHS4032. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PHILIPS TV 32PHS4032
We’ve just seen how to put a normal color on your PHILIPS TV 32PHS4032.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 32PHS4032!
How do I get my TV color back to normal?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How do I reset the color on my Philips TV?
– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.
How do I manually reset my Philips TV?
– Step 1: go to the home screen.
– Step 2: go to settings.
– Step 3: go to general settings.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
How do I fix the picture on my Philips TV?
Picture settings Go to TV settings – Picture to access the following settings: Picture Mode: Select a predefined color brightness setting for picture and video display.
Custom Settings: Customize color values in brightness, contrast, saturation and sharpness.
How to Reset Phillips Smart TV – Factory Reset Easy Guide
6 ancillary questions
How do I force restart my Philips TV?
Can you fix a TV that has gone black?
Unplug the TV from the wall, and, if possible, remove the power cord from the back of the TV to perform a soft reset. Wait 30 seconds, and plug the TV back into a working outlet to test it again.
If you’re still having screen issues, you might want to bring in an expert — they’ll know how to fix your TV’s black screen.
Why is there no color on my TV?
Raster, Color, and Video Problems First, confirm that the source is actually in color – try another channel or input device.
Next, check the settings of the color control – it may have accidentally been turned down.
If your TV has some kind of automatic picture mode, try turning if off and adjusting the color control.
How do I fix the black screen of death on my TV?
In many cases, the black screen of death can be fixed by restarting the TV or by resetting it to its factory settings.
– Step 1: go to the home screen. Go to the home screen of the TV.
– Step 2: go to settings.
Open the settings menu via the gearwheel on the top right of the screen.
– Step 3: go to general settings.
In the menu on the left, you can see different settings appear.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
Why does my Philips TV keep changing screen size?
When the TV picture format is set to [Auto fill], the TV will automatically adjust the picture to fill the screen when black bars or subtitles are detected.
In this option, you may experience a constantly changing picture format when the TV performs the automatic picture format conversion.
You may also be interested in the following articles:
- How to reset a normal color on PHILIPS TV 55PUS6162
- PHILIPS TV LED 32PFS5603 TV no longer lights or stays on standby
- How to record on PHILIPS TV 22PFS4022
You still have issues? Our team of experts and passionate could help you, feel free to contact us.