How to reset a normal color on your PHILIPS TV 55PUS6162
You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 55PUS6162 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 55PUS6162. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 55PUS6162.
SCART on your PHILIPS TV 55PUS6162
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PHILIPS TV 55PUS6162 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PHILIPS TV 55PUS6162 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PHILIPS TV 55PUS6162 in our articles.
Do not panic ! Here is how to reset a normal color on your PHILIPS TV 55PUS6162 with standard TV settings.
Take the remote control of your PHILIPS TV 55PUS6162, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PHILIPS TV 55PUS6162. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 55PUS6162.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 55PUS6162, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 55PUS6162.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PHILIPS TV 55PUS6162
Finally, the capacitors may be at fault when the colors of your PHILIPS TV 55PUS6162 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 55PUS6162, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PHILIPS TV 55PUS6162 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 55PUS6162. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PHILIPS TV 55PUS6162
We’ve just seen how to put a normal color on your PHILIPS TV 55PUS6162.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 55PUS6162!
How do I reset my Philips 55 inch TV?
– Step 1: go to the home screen. Go to the home screen of the TV.
– Step 2: go to settings.
Open the settings menu via the gearwheel on the top right of the screen.
– Step 3: go to general settings.
In the menu on the left, you can see different settings appear.
– Step 4: find the factory settings.
– Step 5: confirm the reset.
How do I get the color back on my Philips TV?
– Press the menu button.
– Select PICTURE.
– Select COLOR.
– Use button left/right to adjust for best picture.
– Press the ‘MENU’ button to exit the menu.
– Black screen.
– Go to home.
– Step 2: go to settings.
– Go to general settings.
– Factory settings.
– Press OK.
What are the best color settings for Philips TV?
Set the Contrast to a level of approximately 85, Brightness 45-50, Color to 50-55, sharpness 5-7.
How to fix Screen Brightness macro dimming on 4k Philips 5000 UHD TV
10 ancillary questions
What causes TV to lose color?
Mismatched, damaged, or poorly fitted cables will lead to color distortions where the pictures appear to be fuzzy, blurry or sometimes flicker.
Do hardware faults cause color issues? Severe TV colorTV colorThe first practical example of this sort of system was again pioneered by John Logie Baird.
In 1940 he publicly demonstrated a color television combining a traditional black-and-white display with a rotating colored disk.https://en.wikipedia.org › wiki › Color_televisionColor television – Wikipedia problems may be due to malfunctioned hardware or screen damage.
Unplug the TV from the electrical outlet, and while its unplugged hold down the power button on the TV for about 30 seconds.
Once that time is up, release the power button and tap the other onboard buttons 2 or 3 times each. Once that is done plug the TV back into power, and see if it responds any more like usual.
How do I fix my Philips TV black screen?
Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice.
Press the cursor down to select RESET AV SETTINGS.
How do I manually reset my TV?
Why is my TV not showing color?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
If the TV does not respond, the remote control may be low in battery power and you need to replace the battery.
2) Ensure that the battery of the remote control is inserted according to the illustration inside the battery compartment. 3) After replacing the battery, randomly test some functions of the remote control.
How do I change my Philips TV from black and white to color?
Press the menu button. Select PICTURE. Select COLOR. Use button left/right to adjust for best picture.
Why is my Philips TV in black and white?
Normally a black and white picture is caused by incorrect cabling.
This can happen if a composite cable is plugged into a component connection or if a component cable is plugged into a composite connection.
Make sure that the correct cables are connected from the source to the back of the TV.
How do I get the color back on my Philips Smart TV?
– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.
You may also be interested in the following articles:
- How to unlock your PHILIPS TV 43PUS6262
- How to go online with a PHILIPS TV 65PUS6262
- How to reset sound and audio settings on PHILIPS TV LED 32PFS5603
You still have issues? Our team of experts and passionate could help you, feel free to contact us.