How to set DTT channels on PHILIPS TV LED 32PFS5603

How to set digital terrestrial (DTT) channels on PHILIPS TV LED 32PFS5603

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV PHILIPS TV LED 32PFS5603.

This setting consists of a channel search on your PHILIPS TV LED 32PFS5603 so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on PHILIPS TV LED 32PFS5603

If you do not have a DTT adapter, here’s how to proceed: start by turning on your PHILIPS TV LED 32PFS5603, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your PHILIPS TV LED 32PFS5603.

For the next steps, please do not select “update” on your PHILIPS TV LED 32PFS5603!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of PHILIPS TV LED 32PFS5603, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your PHILIPS TV LED 32PFS5603.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via PHILIPS TV LED 32PFS5603

If you have a DTT adapter, here’s how to proceed: start by turning on your PHILIPS TV LED 32PFS5603, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about PHILIPS TV LED 32PFS5603 in our articles.

During the next steps, please do not select “update” on your PHILIPS TV LED 32PFS5603 as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your PHILIPS TV LED 32PFS5603.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your PHILIPS TV LED 32PFS5603

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on PHILIPS TV LED 32PFS5603 is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your PHILIPS TV LED 32PFS5603.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your PHILIPS TV LED 32PFS5603.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your PHILIPS TV LED 32PFS5603.

Start manual channel search on PHILIPS TV LED 32PFS5603

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your PHILIPS TV LED 32PFS5603!

To conclude on setting channels on your PHILIPS TV LED 32PFS5603

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your PHILIPS TV LED 32PFS5603.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

How do I scan for antenna channels on my Philips TV?

– Click ‘Start’.
– Select ‘Antenna’ or ‘Cable’.
– Select your cable provider.
– Choose analog and/or digital channels.
– Start searching.
– Enter the possible network frequency.
– Enter the network ID.
– The television will search for channels.

How do I get local channels on my Philips TV?

How do I reset channels on my Philips TV?

Press the Home button on your remote control. Select Setup and press OK on your remote control. First select Channel settings, then Channel installation and then press OK on your remote control. Close the menu (you do this by pressing the Back button on your remote control one or more times).

How To Get Local Channels on Philips TV

7 ancillary questions

What input should TV be on for antenna?

In general, though, setting your TV’s input to “TV” and flipping through channels should do the trick.

If you know your local channels’ exact numbers, try navigating to one of them with your TV’s input set to “TV”.

How can I get my antenna to work on my TV?

Simply attach the antenna’s coaxial cable into the plug labeled “Antenna/Cable” on the back of your television set.

If your TV is older than that, you’ll definitely need a digital tuner of some kind: either a VCR, DVD, or DVR with a digital tuner, or a digital converter box.

Why is my TV not recognizing my antenna?

Reconnect all cables at the back of the TV or box, making sure that the cables are all properly connected (you want to avoid loose cables that could cause signal loss) and if you have a signal booster connected, try removing that and plug the antenna cable straight into your receiver, recorder or TV.

Why is my TV not finding any channels?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.

If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I get my antenna to pick up channels?

– Adjust The Position.
– Switch To An Outdoor Or Attic Antenna.
– Keep The Cable Away From Power Cords.
– Upgrade Your Cable Splitters.
– Install An Antenna Rotator.

How do I get my TV to recognize my antenna?

Turn on your television and locate the Settings menu. Look for a Cable/Antenna setting and choose Antenna. Look for an auto program or channel scan option and select it. Wait for your television to scan for channels.

How do you watch regular TV on a smart TV?

Open your smart TV’s app store and run a search for the city where your local channels operate and you should get a list of apps from various channels that will allow you to watch their broadcast feed live online.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.