How to reset a normal color on PHILIPS TV 24PFS4022

How to reset a normal color on your PHILIPS TV 24PFS4022

You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 24PFS4022 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 24PFS4022. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 24PFS4022.

SCART on your PHILIPS TV 24PFS4022

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your PHILIPS TV 24PFS4022 can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your PHILIPS TV 24PFS4022 settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on PHILIPS TV 24PFS4022 in our articles.

Do not panic ! Here is how to reset a normal color on your PHILIPS TV 24PFS4022 with standard TV settings.

Take the remote control of your PHILIPS TV 24PFS4022, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your PHILIPS TV 24PFS4022. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 24PFS4022.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 24PFS4022, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 24PFS4022.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on PHILIPS TV 24PFS4022

Finally, the capacitors may be at fault when the colors of your PHILIPS TV 24PFS4022 are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 24PFS4022, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your PHILIPS TV 24PFS4022 television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 24PFS4022. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your PHILIPS TV 24PFS4022

We’ve just seen how to put a normal color on your PHILIPS TV 24PFS4022.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 24PFS4022!

How do I get my TV color back to normal?

First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.

Calibrate the contrasts and brightness so that both the whites are blacks are distinct.

Turn the sharpness level to the highest point, then down—then added color.

How do I reset the color on my Philips TV?

– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right to GENERAL.
– Press the cursor down to select RESET AV SETTINGS.
– Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.

How do you adjust the color on a Philips TV?

– Press the menu button.
– Select PICTURE.
– Select COLOR.
– Use button left/right to adjust for best picture.
– Press the ‘MENU’ button to exit the menu.

How do I manually reset my Philips TV?

– Step 1: go to the home screen.
– Step 2: go to settings.
– Step 3: go to general settings.
– Step 4: find the factory settings.
– Step 5: confirm the reset.

PHILIPS TV SERVICE MENU || LED TV SERVICE MODE CODE || EXIT STORE MODE

7 ancillary questions

How do I fix the blue tint on my Samsung TV?

What is the best color setting for a TV Philips?

Best results are obtained when the room has subdued lighting.

Set the Contrast to a level of approximately 85, Brightness 45-50, Color to 50-55, sharpness 5-7.

How do I force a factory reset on my TV?

– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.

Why does my TV screen look blue?

The most common reason for a TV to display a blue screen with no picture is because the source device has not been set to the proper mode.

If you are using a cable or satellite set-top box, ensure that it is turned on and set to an active station.

How do I fix the blue tint on my TV?

– Reboot your TV. Before diving into the image settings or performing any troubleshooting on your TV, the first thing to try is turning it off and back on.
– Change Picture Mode.
– Adjust Color Temperature.
– Adjust White Balance.
– Disable HDR.
– Check the Connection.
– Swap the Connector Cable.
– Change Input.

Why is my Philips TV have a blue tint?

Most flat-panel LCD TVs have an LED backlight.

An LED backlight is bright, slim, and efficient, but LED lighting often has a cool color temperature which casts a slight blue tint.

How do I reset my Philips TV if it wont turn on?

– Check that the TV’s AC power cord is plugged into the power outlet.
– Unplug the TV, wait for 60 seconds.

Then re-insert plug into the mains socket and turn on the TV again.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.