How to reset a normal color on PANASONIC 49FX600

How to reset a normal color on your PANASONIC 49FX600

You wanted to watch TV when, suddenly, you noticed your PANASONIC 49FX600 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your PANASONIC 49FX600. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PANASONIC 49FX600.


The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your PANASONIC 49FX600 can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your PANASONIC 49FX600 settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on PANASONIC 49FX600 in our articles.

Do not panic ! Here is how to reset a normal color on your PANASONIC 49FX600 with standard TV settings.

Take the remote control of your PANASONIC 49FX600, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your PANASONIC 49FX600. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PANASONIC 49FX600.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your PANASONIC 49FX600, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PANASONIC 49FX600.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on PANASONIC 49FX600

Finally, the capacitors may be at fault when the colors of your PANASONIC 49FX600 are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PANASONIC 49FX600, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your PANASONIC 49FX600 television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PANASONIC 49FX600. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your PANASONIC 49FX600

We’ve just seen how to put a normal color on your PANASONIC 49FX600.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PANASONIC 49FX600!

Why is my Panasonic TV showing no signal?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.

If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How do I reset my Panasonic TV without picture?

Reset Panasonic TV with no picture Unplug your Panasonic TV from power.

Press and hold the power button on your TV for 30 seconds.

Plug the TV back into power.

How do I format my Panasonic TV?

– Press [ MENU ] on the remote.
– Select “Setup” then press [OK].
– Select [System] then press [OK].
– Select [Factory defaults] then press [OK].
– Select [Yes then press [OK].

Where is the reset button on Panasonic TV?

– 1 | Press Menu On Your Remote.

Take your Panasonic remote control and simply click ‘menu’.
– 2 | Go To Setup. Select setup on the left of the TV screen.
– 3 | Select System.
– 4 | Click Factory Defaults.
– 5 | Select Yes.


6 ancillary questions

How do I fix my TV when it says no signal?

Disconnect the HDMI cable from your source device and the TV and then reconnect making sure the connection is secure.

If the issue continues, try using a different HDMI cable.

Try connecting your source device to a different HDMI port on your TV, and then change the TV input to match the port used.

Why does my HDMI say no signal when I plug it in?

Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again.

If your TV supports HDMI Enhanced Format, and the source supports 4K, turn on the HDMI Input Enhanced setting to receive high quality 4K signals from the source.

How do I get my channels back on my Panasonic TV?

– Press the Menu button on the remote.
– Highlight the “Setup” option and press “OK”
– Highlight the “Program Channel” option and press ‘OK”
– In the Program Channel menu, Select “Antenna” in the “ANT In” box.
– Select “Auto” then press OK.

How do I reset my HDMI port on my TV?

Where is the reset button on a Panasonic?

– Press the Menu soft key (middle soft key) at the bottom of the screen.
– Select System Settings from the menu.
– Enter #136 on the keypad.
– Select Yes when asked if you are sure you want to factory reset the phone.

The phone will be reset successfully after startup.

How do you fix a VIZIO TV when it says no signal?

– Reboot Your Vizio Smart TV.
– Ensure Cables are firmly connected.
– Check Your Input Source.
– Check if Input Source is Hidden.
– Reset your Vizio Smart TV.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.