How to reset sound and audio settings on PANASONIC TX

How to reset the sound and audio settings on PANASONIC TX

Sometimes the sound or audio system of your PANASONIC TX does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your PANASONIC TX. We will see in this article solutions for each problem stated above.

A “beep” sound from your PANASONIC TX

When you turn on your PANASONIC TX, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your PANASONIC TX. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on PANASONIC TX, you must disassemble to the back of your PANASONIC TX TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your PANASONIC TX

The first simple step in this case is to check if your TV, model PANASONIC TX, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your PANASONIC TX.

Find all the information about PANASONIC TX in our articles.

Offset sound on PANASONIC TX

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV PANASONIC TX.

Shifted sound from your PANASONIC TX on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your PANASONIC TX, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your PANASONIC TX, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your PANASONIC TX

Some TVs like your PANASONIC TX have a “Sound delay” option.

If this has been set on your PANASONIC TX, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on PANASONIC TX

We have just seen how to reset the sound on TV PANASONIC TX.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your PANASONIC TX.

Where are the audio settings on Panasonic TV?

Press the [MENU] button on the TV remote.

Press the [DOWN] arrow on the TV remote until “Sound” or “Audio” is highlighted. Press the [OK] button on the TV remote.

Press the [DOWN] arrow on the TV remote until “Digital Audio Out” or “Digital Audio Selection” is highlighted.

Why is sound not working on Panasonic TV?

Make sure the volume is up and mute is off.

Ensure all connections are correct and secure.

Try listening to audio from another device, such as a DVD player or a game console, to narrow down the source of the problem.

If the TV is connected to a Panasonic Home Theater via HDMI cable, then check VIERA Link controls.

How do I manually reset my Panasonic TV?

– 1 | Press Menu On Your Remote.

Take your Panasonic remote control and simply click ‘menu’.
– 2 | Go To Setup. Select setup on the left of the TV screen.
– 3 | Select System.
– 4 | Click Factory Defaults.
– 5 | Select Yes.
– Locate the reset button on the TV.
– Press the reset button.
– Turn the TV back on.

How do I get the volume to work on my Panasonic TV?

– 1 Check Mute.

Make sure the sound on your TV isn’t muted. Push the Mute button on your TV remote.
– 2 Adjust Volume.

On your TV remote, use the Volume Up/Down buttons.
– 3 Sound Menu. Push the Menu button on your TV Remote.

How to Reset Sound Settings on Panasonic TV?

6 ancillary questions

Why does my Panasonic remote control not work?

Try a remote reset by removing the batteries and pressing every button on the remote twice.

Re-insert the batteries.

To operate other devices, such as changing channels when using Cable or Satellite boxes, or operating non-Panasonic Blu-ray players, use the remote supplied with the device.

Why does my TV suddenly have no sound?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

How do you get the sound back on your TV?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

Why is there suddenly no sound on my Samsung TV?

On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.

Select Sound Test and wait for the test to finish.

If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.

How can I reset my remote control?

– Remove the batteries from the remote control.
– On the remote control, press the Power button for three seconds.
– Reinsert the batteries, making sure they are inserted with the correct polarity (-/+), then see if the issue is resolved.

How do I get my Panasonic remote to work my TV?

– Press and hold down the MAGIC key on the universal Panasonic TV remote.
– Select the device you want to connect your universal Panasonic remote control to.
– Finally, press and hold down the digit key to set up for your brand (Panasonic) and device.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.