How to reset a normal color on HAIER LE28F6600C

How to reset a normal color on your HAIER LE28F6600C

You wanted to watch TV when, suddenly, you noticed your HAIER LE28F6600C displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your HAIER LE28F6600C. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your HAIER LE28F6600C.

SCART on your HAIER LE28F6600C

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your HAIER LE28F6600C can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your HAIER LE28F6600C settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on HAIER LE28F6600C in our articles.

Do not panic ! Here is how to reset a normal color on your HAIER LE28F6600C with standard TV settings.

Take the remote control of your HAIER LE28F6600C, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your HAIER LE28F6600C. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your HAIER LE28F6600C.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your HAIER LE28F6600C, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your HAIER LE28F6600C.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on HAIER LE28F6600C

Finally, the capacitors may be at fault when the colors of your HAIER LE28F6600C are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your HAIER LE28F6600C, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your HAIER LE28F6600C television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your HAIER LE28F6600C. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your HAIER LE28F6600C

We’ve just seen how to put a normal color on your HAIER LE28F6600C.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your HAIER LE28F6600C!

Why is my Haier TV screen blue?

Answer: Reason: There will be blue screen when the signal is cut off.

Why is my TV going different colors?

Mismatched, damaged, or poorly fitted cables will lead to color distortions where the pictures appear to be fuzzy, blurry or sometimes flicker.

Do hardware faults cause color issues? Severe TV colorTV colorColor television (American English) or colour television (Commonwealth English) is a television transmission technology that includes color information for the picture, so the video image can be displayed in color on the television set. › wiki › Color_televisionColor television – Wikipedia problems may be due to malfunctioned hardware or screen damage.

How do I change the color back on my TV?

First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.

Calibrate the contrasts and brightness so that both the whites are blacks are distinct.

Turn the sharpness level to the highest point, then down—then added color.

Reset the HAIER TV

5 ancillary questions

How do I change my Samsung TV from black and white to color?

– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.

How do I get my TV to reboot?

Restarting has the same effect as unplugging your TV power and then plugging it in again.

To restart your TV, navigate to Settings > System > Power and then select System restart.

How do you fix a black TV or blue screen?

Cable or connection issue Try using another set of the same cable (e.g.

new HDMI) or different type of cable (e.g.

component, if you’re using HDMI).

Try a different cable slot.


if the HDMI cable is plugged in in HDMI1 slot, unplug it then plug it in a different slot (HDMI2 or HDMI3).

How do I get my TV off black and white?

Many TV owners have reported that their black and white screen issues resulted from poor picture settings.

An easy fix to this issue is to calibrate the color through the TV settings menu.

Then, navigate through the settings and try to adjust them to fill in color.

Why does the picture on my TV look weird?

Colloquially the feature that causes this look is called the “soap opera effect,” but has many names like “motion smoothing,” “motion interpolation,” or “ME/MC” for motion estimation/motion compensation.

The even better news is that on nearly every TV that has this feature, you can turn it off.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.