How to connect your TCL TV U49C7006
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your TCL TV U49C7006 television to its peripherals.
To do this, we will explain how to connect your TCL TV U49C7006 TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your TCL TV U49C7006 TV
To begin with, we’ll explain how to connect your TCL TV U49C7006 TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV TCL TV U49C7006.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your TCL TV U49C7006
Plugging in your TV decoder to your TCL TV U49C7006 is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your TCL TV U49C7006
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about TCL TV U49C7006 in our articles.
Connect it in “HDMi In” to your TV TCL TV U49C7006, and “HDMi Out” to your decoder.
Then take the SCART cable to your TCL TV U49C7006.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your TCL TV U49C7006
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the TCL TV U49C7006 with a HDMI cable.
Connect it in “HDMi In” to your TV TCL TV U49C7006, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your TCL TV U49C7006 to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV TCL TV U49C7006, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your TCL TV U49C7006
Finally, if you want a better sound from your TCL TV U49C7006, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your TCL TV U49C7006 TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
Why is my TCL TV saying no signal?
Make sure the HDMI or DVI component is turned on and the cables are firmly connected.
If problems still occur, turn off your component and reconnect it.
Reset the power by unplugging the power cord and plugging it back in.
How do I connect my TCL to my TV?
With the TV powered off, connect the HDMI cable from your Cable or Satellite ReceiverSatellite ReceiverA free-to-air or FTA Receiver is a satellite television receiver designed to receive unencrypted broadcasts.https://en.wikipedia.org › wiki › FTA_receiverFTA receiver – Wikipedia to the HDMI 1 input or any available HDMI ports on your TCL Roku TV. Press the button.
If the receiver if powered on and cables are properly plugged your TV will recognize the connection.
How do I watch regular TV on TCL?
– First, make sure you are on the Antenna TV Input options.
– Then press on the TV remote, select Channel and then press OK.
– Use the navigational buttons to scroll down and select EPG and press OK.
– This will display the program guide as shown below.
Where is HDMI cable on TCL TV?
How To Turn On HDMI ARC Function On A TCL TV
9 ancillary questions
Why is my TCL TV not discoverable?
If you cannot see your device on the list of available Bluetooth devices from your TCL Android TV, try the following steps that might help.
Make sure Bluetooth is turned or enabled on for your device.
Refer to your device’s user manual.
Turn off your device, and then turn it back on.
Why does my TV say no signal when everything is plugged in?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.
If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
How do you fix your TV when it says no signal?
Disconnect the HDMI cable from your source device and the TV and then reconnect making sure the connection is secure.
If the issue continues, try using a different HDMI cable.
Try connecting your source device to a different HDMI port on your TV, and then change the TV input to match the port used.
How do I get my Roku to work again?
– Remove the Batteries.
Open the battery compartment on your Roku remote and remove the batteries.
– Restart your Roku Device.
Disconnect the power lead from your Roku device and wait five seconds before reconnecting it.
– Reinsert the Batteries Into Your Roku Remote.
What does it mean when the TV says no signal?
A “No Signal”, “No Source”, or “No Input” message will appear on your TV screen if the TV is not receiving a signal from your TV box.
This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.
How do I make my TCL Android TV discoverable?
– Press the Home button on the remote control to go to the Home screen.
– Use navigational buttons and scroll to the Settings icon. Press OK to confirm.
– Scroll down and select Remote and Accessories.
Press OK to confirm.
– Select Add Accessory.
– Select your device on the list.
How do I set up my TCL Roku TV?
– Press on your remote to open the main screen.
– Scroll down and select Settings.
– Press the right arrow button and select Network.
– Press the right arrow button and select Wireless.
– Your TCL Roku TV will start scanning for available wireless network.
What causes no signal?
Generally, a ‘no signal’ message signifies an issue with reception; the TV is not receiving anything from the cables or the antenna.
In a nutshell, this simply means that your service (satellite or cable) is not able to display movies and shows.
How do I setup my TCL smart TV?
– When your TV says, “Quickly set up your TV with your Android phone?” use your remote to choose Continue or Yes.
– On your Android phone, open the pre-installed Google app.
– Type or say “set up my device.”
– Follow the instructions on your phone until you see a code.
– On your phone, tap the name of your TV when it shows up.
You may also be interested in the following articles:
You still have issues? Our team of experts and passionate could help you, feel free to contact us.