How to connect your PANASONIC TV LED TX-49FX613E
You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your PANASONIC TV LED TX-49FX613E television to its peripherals.
To do this, we will explain how to connect your PANASONIC TV LED TX-49FX613E TV to a power supply first, your TV set secondly, and your DVD player finally.
Connecting power to your PANASONIC TV LED TX-49FX613E TV
To begin with, we’ll explain how to connect your PANASONIC TV LED TX-49FX613E TV to a power supply.
This is the simplest manipulation.
In the box containing your TV, you must have been provided with different cables.
Look for one that ends with a plug.
It may be already connected to your TV PANASONIC TV LED TX-49FX613E.
If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.
All you have to do is turn on the TV with its remote control.
Connect your TV set to your PANASONIC TV LED TX-49FX613E
Plugging in your TV decoder to your PANASONIC TV LED TX-49FX613E is essential for you to watch channels on your television.
There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.
Connecting the satellite decoder to your PANASONIC TV LED TX-49FX613E
There are four connections to make when starting up your satellite decoder.
But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.
Find all the information about PANASONIC TV LED TX-49FX613E in our articles.
Connect it in “HDMi In” to your TV PANASONIC TV LED TX-49FX613E, and “HDMi Out” to your decoder.
Then take the SCART cable to your PANASONIC TV LED TX-49FX613E.
It has wide ends and is often blue or black.
And connect your television to your decoder.
Then connect the LSB cable from your satellite parable to your decoder.
Finally, you must connect the power supply of your decoder to a power outlet.
Connecting a provider decoder to your PANASONIC TV LED TX-49FX613E
With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.
First, start by connecting the decoder to the box via the supplied ethernet cable.
Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.
And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the PANASONIC TV LED TX-49FX613E with a HDMI cable.
Connect it in “HDMi In” to your TV PANASONIC TV LED TX-49FX613E, and “HDMi Out” to your decoder.
Finally, connect the power supply via the “power supply” input of your decoder.
Do not forget to plug the other end into a power outlet!
Plug in your DVD player
To plug in a DVD player to your PANASONIC TV LED TX-49FX613E to watch your favorite movies or series, you need to make 3 connections.
To get started, find the HDMI cable supplied with your DVD player.
Connect it in “HDMi In” to your TV PANASONIC TV LED TX-49FX613E, and “HDMi Out” to your DVD player.
Then take the scart cable.
It has wide ends and often blue or black.
And connect your DVD player to your decoder.
Finally, you must connect the power supply of your DVD player to a power outlet.
Plug in your amp to your PANASONIC TV LED TX-49FX613E
Finally, if you want a better sound from your PANASONIC TV LED TX-49FX613E, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.
These are the yellow and blue colored outputs.
Then connect the amplifier to your PANASONIC TV LED TX-49FX613E TV with the optical cable of your amp.
It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.
How do I connect my Panasonic TV to HDMI?
Acquire a cable that fits the ports on both devices.
Connect the cable from one device’s HDMI port to the other.
Use the Source or Input button on the TV to switch to the port. Configure video and audio on the device if needed.
How do I connect my Panasonic TV to power cable?
How do I hook up my Panasonic TV?
– Connect HDMI OUT on satellite receiver / digital cable box to HDMI IN on TV.
Image varies by model.
– After connection is made, put the TV in HDMI Video mode by pressing the “TV/VIDEO” or “Input” button on the remote control.
Telewizor PANASONIC LED TX-49FX613E
10 ancillary questions
How do I rescan my Panasonic TV?
Press the [MENU] button on the TV remote.
Press the [▼Down Arrow] arrow to select “TV” and press [OK]. Press the [▼Down Arrow] arrow to select “Tuner Mode” and press [OK]. Press the [▼Down Arrow] arrow to select “Channel Scan” and press [OK].
How do I reset my HDMI port on my Panasonic TV?
Why does my Panasonic TV have no signal?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.
If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
– Press the Menu soft key (middle soft key) at the bottom of the screen.
– Select System Settings from the menu.
– Enter #136 on the keypad.
– Select Yes when asked if you are sure you want to factory reset the phone.
The phone will be reset successfully after startup.
How do I switch to HDMI channels?
Switch to the HDMI source on your TV. Use the SOURCE or INPUT button on your TV or remote to select the HDMI port.
You’ll usually have to press it a few times until you reach the right port number.
Once you reach the correct source, you should see the device’s image on the screen.
How do I get the HDMI to work on my Panasonic TV?
– Press the [Menu] button.
The “Main Menu” screen appears.
– Select “Setup”.
– Press [OK]
– Select “HDMI control”.
– Press [OK]
How do I reset my Panasonic remote control?
Try a remote reset by removing the batteries and pressing every button on the remote twice.
Re-insert the batteries.
To operate other devices, such as changing channels when using Cable or Satellite boxes, or operating non-Panasonic Blu-ray players, use the remote supplied with the device.
Why are my HDMI channels not working?
The HDMI cable you’re using might be malfunctioning or too old to perform adequately.
Try a different HDMI cable to see if it solves your issue.
Alternatively, you can use the first HDMI cable to connect a different video device to check if the video device is malfunctioning.
How do I get my TV to recognize HDMI Input?
– Make sure the TV is set to the correct video input to receive the HDMI signal.
Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV.
– Make sure the connected device is turned on.
How do I reset my Panasonic TV?
– 1 | Press Menu On Your Remote.
Take your Panasonic remote control and simply click ‘menu’.
– 2 | Go To Setup. Select setup on the left of the TV screen.
– 3 | Select System.
– 4 | Click Factory Defaults.
– 5 | Select Yes.
– Locate the reset button on the TV.
– Press the reset button.
– Turn the TV back on.
You may also be interested in the following articles:
- How to connect your PANASONIC TV LED TX-43FX613E
- How to reset a normal color on PANASONIC TX55FX700E
- How to set DTT channels on PANASONIC TV TX-65EX780E 2400 BMR 4K HDR
You still have issues? Our team of experts and passionate could help you, feel free to contact us.