How to reset a normal color on your PANASONIC TX55FX700E
You wanted to watch TV when, suddenly, you noticed your PANASONIC TX55FX700E displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PANASONIC TX55FX700E. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PANASONIC TX55FX700E.
SCART on your PANASONIC TX55FX700E
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PANASONIC TX55FX700E can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PANASONIC TX55FX700E settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PANASONIC TX55FX700E in our articles.
Do not panic ! Here is how to reset a normal color on your PANASONIC TX55FX700E with standard TV settings.
Take the remote control of your PANASONIC TX55FX700E, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PANASONIC TX55FX700E. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PANASONIC TX55FX700E.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PANASONIC TX55FX700E, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PANASONIC TX55FX700E.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PANASONIC TX55FX700E
Finally, the capacitors may be at fault when the colors of your PANASONIC TX55FX700E are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PANASONIC TX55FX700E, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PANASONIC TX55FX700E television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PANASONIC TX55FX700E. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PANASONIC TX55FX700E
We’ve just seen how to put a normal color on your PANASONIC TX55FX700E.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PANASONIC TX55FX700E!
How to Change Picture Settings on PANASONIC TV TX-40FS500 40-inch Smart TV – Set Display Mode on TV
11 ancillary questions
How do I force a factory reset on my TV?
– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.
Can you factory reset a TV?
Select Settings.
The next steps will vary depending on your TV menu options: Select Device Preferences → Reset → Factory data reset → Erase everything → Yes.
Select Storage & Reset → Factory data reset → Erase everything → Yes.
How do I reset my TV to factory settings without a remote?
– Unplug the TV power cord from the electrical socket.
– Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.
How do I change my Samsung TV from black and white to color?
– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.
How do I change my Panasonic TV from black and white to color?
Using your remote, go into settings, then go to picture, and then to colour.
How do I force reset my TV?
Power Reset Unplug the AC power cord (mains lead).
If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet.
Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.
How do I reset my Panasonic TV without picture?
Reset Panasonic TV with no picture Unplug your Panasonic TV from power.
Press and hold the power button on your TV for 30 seconds.
Plug the TV back into power.
How do I get my color back on my TV?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How do I format my Panasonic TV?
– Press [ MENU ] on the remote.
– Select “Setup” then press [OK].
– Select [System] then press [OK].
– Select [Factory defaults] then press [OK].
– Select [Yes then press [OK].
How do I reset my TV without a remote?
You may also be interested in the following articles:
- How to connect headphones to PANASONIC TX-65EZ950 OLED HDR – Smart TV
- How to record on PANASONIC 55FX600 4K HDR Smart
- How to reset sound and audio settings on PANASONIC TV LED TX-43FX613E
You still have issues? Our team of experts and passionate could help you, feel free to contact us.