GRUNDIG TV LED 28VLE5500WG no longer starts or stays on standby
You would like to watch your favorite program when, without warning, your GRUNDIG TV LED 28VLE5500WG television decides not to turn on, whereas an hour ago it worked very well.
It can be a frustrating time, especially if your television has no reason to be down.
That’s why we wrote this article to help you when your GRUNDIG TV LED 28VLE5500WG TV does not turn on or stays on standby.
Check the remote control of your GRUNDIG TV LED 28VLE5500WG
It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.
Make sure your remote has charged and properly and has charged batteries.
If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your GRUNDIG TV LED 28VLE5500WG.
If one of these two solutions works, the problem is with your remote control and not with your GRUNDIG TV LED 28VLE5500WG TV.
You can enjoy your program again!
Check connections to your GRUNDIG TV LED 28VLE5500WG
Sometimes, between your GRUNDIG TV LED 28VLE5500WG TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.
Take a look behind your TV and check that the connections are the right ones.
If this is the case, make sure there is power in the outlets.
If everything works fine but your GRUNDIG TV LED 28VLE5500WG TV refuses to turn on, go to the next paragraph.
Check capacitors at the back of your GRUNDIG TV LED 28VLE5500WG
Beware, before doing this operation, make sure you know about electricity and the like.
Find all the information about GRUNDIG TV LED 28VLE5500WG TV in our articles.
If not, please go and see a professional for your GRUNDIG TV LED 28VLE5500WG before doing anything.
In any case, please unplug the electrical wire connected to your GRUNDIG TV LED 28VLE5500WG before touching the back of it.
You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulating piece and metal wires.
These, when spoiled, may be the reason why your GRUNDIG TV LED 28VLE5500WG TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
To repair capacitors on your GRUNDIG TV LED 28VLE5500WG, you must check the back of your GRUNDIG TV LED 28VLE5500WG television and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from your GRUNDIG TV LED 28VLE5500WG.
Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
And now your GRUNDIG TV LED 28VLE5500WG works again!
Run the warranty of your GRUNDIG TV LED 28VLE5500WG
If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your GRUNDIG TV LED 28VLE5500WG TV.
Many retailers will take your GRUNDIG TV LED 28VLE5500WG to repair or provide you with another.
Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your GRUNDIG TV LED 28VLE5500WG, who may provide you with another free of charge as an apology.
What does it mean if your TV is on standby?
When electronic devices are receiving power but are not running, they are in standby mode.
For example, a television is in standby mode when it is plugged in, but turned off. While the TV is not “on,” it is ready to receive a signal from the remote control.
What does it mean when a TV won t turn on but has a red standby light?
This means that there is a problem with the On_Off button or a problem with the remote control.
It is also possible that the batteries of the remote are exhausted (or a bad contact) or the window for receiving signals from the remote on the TV is obstructed by some object.
How do I get my Samsung TV off standby mode without the remote?
How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.
Grundig LED TV 48″ defective no picture only sound DIY repair, how do I repair the TV?
11 ancillary questions
How do I fix the color on my Samsung TV?
– Adjusting Color.
– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.
What to do if your Samsung TV light is red but won t turn on?
Leave the TV unplugged for 30 seconds, and when plugging it back in, plug it directly into an outlet that you know works properly.
If that didn’t work, try another outlet.
If the red standby light comes on, your TV is receiving power and will probably turn on just fine.
What to do if your TV is on standby but won’t come on?
Unplug the TV, press and hold the power button for 30 seconds.
Plug it back in.
If this does not work, take it to a repair shop.
What causes standby mode?
Entry to Modern Standby Modern Standby starts when the user causes the system to enter sleep (e.g user pressing the power button, closing the lid, idling out, or selecting Sleep from the power button in the Windows Start menu).
Why is my TV screen black but the light is on?
TV black screens are commonly caused by cable connection issues, issues with input devices, or outdated firmware updates.
Worst case scenario, the power supply board could have malfunctioned. Could a loose cable cause a TV black screen? Perhaps the most common cause of a black screen is connection issues.
How do I stop my TV from going into standby?
Using your TV’s remote, navigate to Home-> Menu-> Settings-> All Settings-> General & Privacy-> System Manager-> Time-> OFF Timer.
If the Sleep Timer has not been enabled, see if Auto Power Off or Off Timer has been enabled and disable it.
How do you fix a TV that turns on but screen is black?
Unplug the TV from the wall, and, if possible, remove the power cord from the back of the TV to perform a soft reset. Wait 30 seconds, and plug the TV back into a working outlet to test it again.
If you’re still having screen issues, you might want to bring in an expert — they’ll know how to fix your TV’s black screen.
How do I fix my Samsung TV stuck on standby?
Why is my TV not switching on?
Check the Power Make sure that the TV is connected to a live power outlet and that it is securely plugged in.
The problem might relate to your plug socket rather than the TV – to find out if this is the case, plug another electrical appliance into the TV’s plug, or connect the TV to a different outlet.
What does it mean when a TV is in standby mode?
This is a setting that allows the TV to receive power even when it’s turned off. Standy mode also allows the TV to read the signal from the remote so that it can be turned on.
Most televisions are automatically in standby mode if they are plugged in. Basically, the TV is asleep, but it isn’t powered down.
What do I do when my TV is in standby mode?
– Press “HOME” on the remote.
– Scroll left to settings.
– select system settings.
– down to eco >select>
– Down to idle tv standby>select>
– adjust to ‘off’.
– Use return button to get back to home screen.
You may also be interested in the following articles:
- How to connect your GRUNDIG TV LED 28VLE5500WG
- How to record on GRUNDIG TV 28VLE5500WG
- How to reset a normal color on GRUNDIG TV 49VLX7730BP
You still have issues? Our team of experts and passionate could help you, feel free to contact us.