How to connect your GRUNDIG TV LED 28VLE5500WG

How to connect your GRUNDIG TV LED 28VLE5500WG

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your GRUNDIG TV LED 28VLE5500WG television to its peripherals.

To do this, we will explain how to connect your GRUNDIG TV LED 28VLE5500WG TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your GRUNDIG TV LED 28VLE5500WG TV

To begin with, we’ll explain how to connect your GRUNDIG TV LED 28VLE5500WG TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV GRUNDIG TV LED 28VLE5500WG.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your GRUNDIG TV LED 28VLE5500WG

Plugging in your TV decoder to your GRUNDIG TV LED 28VLE5500WG is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your GRUNDIG TV LED 28VLE5500WG

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about GRUNDIG TV LED 28VLE5500WG in our articles.

Connect it in “HDMi In” to your TV GRUNDIG TV LED 28VLE5500WG, and “HDMi Out” to your decoder.

Then take the SCART cable to your GRUNDIG TV LED 28VLE5500WG.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your GRUNDIG TV LED 28VLE5500WG

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the GRUNDIG TV LED 28VLE5500WG with a HDMI cable.

Connect it in “HDMi In” to your TV GRUNDIG TV LED 28VLE5500WG, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your GRUNDIG TV LED 28VLE5500WG to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV GRUNDIG TV LED 28VLE5500WG, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your GRUNDIG TV LED 28VLE5500WG

Finally, if you want a better sound from your GRUNDIG TV LED 28VLE5500WG, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your GRUNDIG TV LED 28VLE5500WG TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

How do I use my Grundig Smart TV?

– Open the Disney Plus app on your mobile device.
– Tap the “Cast” button on the home screen on the upper right menu.
– Choose the Grundig TV you wish to watch.
– Tap Play and enjoy!

How do I connect my LED TV to cable?

Connect the cable box to your smart TV with an HDMI cable.

If you’re using an HDMI adapter for a non-HDMI cable boxcable boxA cable converter box or television converter box is an electronic tuning device that transposes/converts channels from a cable television service to an analog RF signal on a single channel, usually VHF channel 3 or 4, or to a different output for digital televisions such as HDMI.https://en.wikipedia.org › wiki › Cable_converter_boxCable converter box – Wikipedia, connect that adapter to the end of the component cable that’s plugged in to your cable box, and then plug the HDMI end into an available HDMI port.

How do you connect a TV to a TV?

How to scan cable TV channels (DVB-C) on Android TV? | GRUNDIG

6 ancillary questions

What is needed to hook up a smart TV?

What do I need to connect a TV?

HDMI cables Nearly everything you might want to connect to a TV these days uses the same connection: HDMI.

HDMI cables carry high-resolution images and sound over one small cable.

Thankfully, HDMI cables are quite cheap.

What devices work with normal TV to smart TV?

– Amazon Fire TV Stick.

The first option will be by using Amazon Fire TV Stick.
– Roku.

Roku has become very popular and it is also very affordable.
– Apple TV.
– Chromecast.
– Gaming Consoles.
– Set-top Boxes.
– Blu-ray Players.
– NVIDIA Shield TV.

Do I need a box for my smart TV?

Does a smart TV need a cable box or broadband? If you want to continue receiving the same channels you have, then the answer is yes: You still need a cable or satellite box, because no other option will deliver the same channels and stations in the same way.

How can I connect my TV to cable without a cable box?

Options for Connecting Without a Box If your provider has an app, install it from your smart TV’s app store to get cable on the TV. Use a coaxial cable for basic cable.

If your TV has a coaxial input, you may be able to use a coaxial cable to connect the smart TV right to your cable wall jack.

What do you need to set up a TV?

Make the Necessary Connections To get started, connect the TV’s power cord to the nearest available outlet. Once that’s done, look for the HDMI Out port on the TV and plug your HDMI cable into it. tv-setup-back-of-television-cables.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.