THOMSON 40FB5426 no longer starts or stays on standby
You would like to watch your favorite program when, without warning, your THOMSON 40FB5426 television decides not to turn on, whereas an hour ago it worked very well.
It can be a frustrating time, especially if your television has no reason to be down.
That’s why we wrote this article to help you when your THOMSON 40FB5426 TV does not turn on or stays on standby.
Check the remote control of your THOMSON 40FB5426
It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.
Make sure your remote has charged and properly and has charged batteries.
If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your THOMSON 40FB5426.
If one of these two solutions works, the problem is with your remote control and not with your THOMSON 40FB5426 TV.
You can enjoy your program again!
Check connections to your THOMSON 40FB5426
Sometimes, between your THOMSON 40FB5426 TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.
Take a look behind your TV and check that the connections are the right ones.
If this is the case, make sure there is power in the outlets.
If everything works fine but your THOMSON 40FB5426 TV refuses to turn on, go to the next paragraph.
Check capacitors at the back of your THOMSON 40FB5426
Beware, before doing this operation, make sure you know about electricity and the like.
Find all the information about THOMSON 40FB5426 TV in our articles.
If not, please go and see a professional for your THOMSON 40FB5426 before doing anything.
In any case, please unplug the electrical wire connected to your THOMSON 40FB5426 before touching the back of it.
You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulating piece and metal wires.
These, when spoiled, may be the reason why your THOMSON 40FB5426 TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
To repair capacitors on your THOMSON 40FB5426, you must check the back of your THOMSON 40FB5426 television and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from your THOMSON 40FB5426.
Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
And now your THOMSON 40FB5426 works again!
Run the warranty of your THOMSON 40FB5426
If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your THOMSON 40FB5426 TV.
Many retailers will take your THOMSON 40FB5426 to repair or provide you with another.
Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your THOMSON 40FB5426, who may provide you with another free of charge as an apology.
What is TV standby mode?
TV standby‐passive mode.
means the television is connected to a power source, produces neither sound nor picture but can be switched into another mode with the remote control unit or via an internal signal.
How To Fix Thomson Led Tv 55uf5663 Fix start up Problem || backlight inverter problem
8 ancillary questions
How do I get my TV off of standby mode?
How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.
Why does my TV keep going to standby?
If you find your TV is turning on or off around the same time like clockwork, it’s possible this was set up accidentally by a child or cat sitting on the remote.
Poke around your TV’s settings to see if you can find the power-scheduling feature and ensure it’s disabled.
Why won’t my TV turn on but red light is on?
This means that there is a problem with the On_Off button or a problem with the remote control.
It is also possible that the batteries of the remote are exhausted (or a bad contact) or the window for receiving signals from the remote on the TV is obstructed by some object.
Is it OK to leave TV on standby?
It’s safe to leave your TV on in standby mode all the time, but you should not leave any type of TV with a still image on the screen for more than 2 hours because this can cause ‘screen burnscreen burnScreen burn-in, image burn-in, ghost image, or shadow image, is a permanent discoloration of areas on an electronic display such as a cathode ray tube (CRT) in an old computer monitor or television set.
It is caused by cumulative non-uniform use of the screen.https://en.wikipedia.org › wiki › Screen_burn-inScreen burn-in – Wikipedia’ where a ghost of the image remains on the screen. Screen burns can be temporary or permanent.
Why does TV go on standby?
When electronic devices are receiving power but are not running, they are in standby mode.
For example, a television is in standby mode when it is plugged in, but turned off. While the TV is not “on,” it is ready to receive a signal from the remote control.
Why is my computer going into standby mode?
By default, your Windows computer goes into sleep (low power) mode if you haven’t used your computer after a certain period of time.
Can I turn off standby mode?
To turn off sleep mode on a Windows 10 PC, go to Settings > System > Power & sleep.
Then select the drop-down menu under Sleep and choose Never.
If you’re using a laptop, do this for battery mode as well.
Is it better to leave TV on standby or turn off?
It Saves Electricity – Small Amount Turning a TV off at night completely and removing from standby will save electricity and will save you a small amount of money.
You may also be interested in the following articles:
- How to connect your THOMSON 49UD6596
- How to go online with a THOMSON TV 43UC6416W
- How to reset sound and audio settings on THOMSON 49UD6596
You still have issues? Our team of experts and passionate could help you, feel free to contact us.