SONY KDL32RE400BAEP no longer starts or stays on standby
You would like to watch your favorite program when, without warning, your SONY KDL32RE400BAEP television decides not to turn on, whereas an hour ago it worked very well.
It can be a frustrating time, especially if your television has no reason to be down.
That’s why we wrote this article to help you when your SONY KDL32RE400BAEP TV does not turn on or stays on standby.
Check the remote control of your SONY KDL32RE400BAEP
It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.
Make sure your remote has charged and properly and has charged batteries.
If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your SONY KDL32RE400BAEP.
If one of these two solutions works, the problem is with your remote control and not with your SONY KDL32RE400BAEP TV.
You can enjoy your program again!
Check connections to your SONY KDL32RE400BAEP
Sometimes, between your SONY KDL32RE400BAEP TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.
Take a look behind your TV and check that the connections are the right ones.
If this is the case, make sure there is power in the outlets.
If everything works fine but your SONY KDL32RE400BAEP TV refuses to turn on, go to the next paragraph.
Check capacitors at the back of your SONY KDL32RE400BAEP
Beware, before doing this operation, make sure you know about electricity and the like.
Find all the information about SONY KDL32RE400BAEP TV in our articles.
If not, please go and see a professional for your SONY KDL32RE400BAEP before doing anything.
In any case, please unplug the electrical wire connected to your SONY KDL32RE400BAEP before touching the back of it.
You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulating piece and metal wires.
These, when spoiled, may be the reason why your SONY KDL32RE400BAEP TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
To repair capacitors on your SONY KDL32RE400BAEP, you must check the back of your SONY KDL32RE400BAEP television and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from your SONY KDL32RE400BAEP.
Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
And now your SONY KDL32RE400BAEP works again!
Run the warranty of your SONY KDL32RE400BAEP
If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your SONY KDL32RE400BAEP TV.
Many retailers will take your SONY KDL32RE400BAEP to repair or provide you with another.
Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your SONY KDL32RE400BAEP, who may provide you with another free of charge as an apology.
What causes the television to kept in a standby mode?
When electronic devices are receiving power but are not running, they are in standby mode.
For example, a television is in standby mode when it is plugged in, but turned off. While the TV is not “on,” it is ready to receive a signal from the remote control.
Why is my SONY TV stuck on standby?
Running a power cycle reset is the quickest and simplest method of fixing a standby issue.
In most cases, cycling the power will resolve the issue and the TV will no longer be stuck in standby mode.
This works for a Sony Bravia reset along with most other models that have Sony standby mode.
What to do if standby light is on TV but won’t turn on?
Unplug the TV, press and hold the power button for 30 seconds.
Plug it back in.
If this does not work, take it to a repair shop.
How To Fix SONY TV Wont Turn On No Standby Light || No Picture No Sound
3 ancillary questions
Why won’t my TV turn on but red light is on?
This means that there is a problem with the On_Off button or a problem with the remote control.
It is also possible that the batteries of the remote are exhausted (or a bad contact) or the window for receiving signals from the remote on the TV is obstructed by some object.
Why won’t my TV turn on but red light is blinking?
If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem.
Most Red LED blink conditions require service.
How do I get my TV off of standby mode?
How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.
You may also be interested in the following articles:
- How to stop or activate audiodescription on SONY Sony KD49XE7005 BAEP TV LED UHD
- Managing parental control on SONY KDL32RE400BAEP
- How to reset a normal color on SONY TV LED KD75XF8596
You still have issues? Our team of experts and passionate could help you, feel free to contact us.