SELECLINE 39265 no longer starts or stays on standby
You would like to watch your favorite program when, without warning, your SELECLINE 39265 television decides not to turn on, whereas an hour ago it worked very well.
It can be a frustrating time, especially if your television has no reason to be down.
That’s why we wrote this article to help you when your SELECLINE 39265 TV does not turn on or stays on standby.
Check the remote control of your SELECLINE 39265
It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.
Make sure your remote has charged and properly and has charged batteries.
If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your SELECLINE 39265.
If one of these two solutions works, the problem is with your remote control and not with your SELECLINE 39265 TV.
You can enjoy your program again!
Check connections to your SELECLINE 39265
Sometimes, between your SELECLINE 39265 TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.
Take a look behind your TV and check that the connections are the right ones.
If this is the case, make sure there is power in the outlets.
If everything works fine but your SELECLINE 39265 TV refuses to turn on, go to the next paragraph.
Check capacitors at the back of your SELECLINE 39265
Beware, before doing this operation, make sure you know about electricity and the like.
Find all the information about SELECLINE 39265 TV in our articles.
If not, please go and see a professional for your SELECLINE 39265 before doing anything.
In any case, please unplug the electrical wire connected to your SELECLINE 39265 before touching the back of it.
You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulating piece and metal wires.
These, when spoiled, may be the reason why your SELECLINE 39265 TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
To repair capacitors on your SELECLINE 39265, you must check the back of your SELECLINE 39265 television and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from your SELECLINE 39265.
Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
And now your SELECLINE 39265 works again!
Run the warranty of your SELECLINE 39265
If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your SELECLINE 39265 TV.
Many retailers will take your SELECLINE 39265 to repair or provide you with another.
Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your SELECLINE 39265, who may provide you with another free of charge as an apology.
How do I get my Samsung TV off standby mode without the remote?
How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.
Why does my TV keep going on standby?
If you find your TV is turning on or off around the same time like clockwork, it’s possible this was set up accidentally by a child or cat sitting on the remote.
Poke around your TV’s settings to see if you can find the power-scheduling feature and ensure it’s disabled.
Selecline television controls
4 ancillary questions
What causes standby mode?
Entry to Modern Standby Modern Standby starts when the user causes the system to enter sleep (e.g user pressing the power button, closing the lid, idling out, or selecting Sleep from the power button in the Windows Start menu).
How do I stop my TV from going into standby?
Using your TV’s remote, navigate to Home-> Menu-> Settings-> All Settings-> General & Privacy-> System Manager-> Time-> OFF Timer.
If the Sleep Timer has not been enabled, see if Auto Power Off or Off Timer has been enabled and disable it.
How do I change my standby mode?
To adjust power and sleep settings in Windows 11, select Start > Settings > System > Power & battery > Screen and sleep.
Can you turn on a Vizio TV manually?
You’ll typically find the buttons on the back of the TV, in the bottom right, or bottom left corners.
It varies from model to model, but once you find the power button, you’ll always be able to turn on the television without a remote.
You may also be interested in the following articles:
- SELECLINE 20800 TV no longer lights or stays on standby
- How to reset sound and audio settings on SELECLINE 32S17
- How to update SELECLINE 50S18 4K UHD
You still have issues? Our team of experts and passionate could help you, feel free to contact us.