How to unlock your TCL TV U49C7006
There are many situations that cause your TCL TV U49C7006 to be blocked or locked. First, a few come from small simple technical problems.
Secondly, you may have retrieved a television from a hotel or hospital as they get rid of their old TVs.
In this case, it is blocked in “hotel” or “hospital” mode.
The last one is that you bought a used TCL TV U49C7006 and a password is still saved on it.
In all these cases, we are here to help you solve your problem.
Here is how to unlock your TCL TV U49C7006.
Simple technical problems locking your TCL TV U49C7006
First, check that your remote has charged and ready-to-use batteries.
If so, also check the connections behind your television: are the cables all connected properly and are in good condition? Continue by checking that your boxes and decoders are running and functional.
If red or orange lights are on, this is a bad sign! Finally, you may have chosen to switch to the universal remote control. Unfortunately it may encounter difficulties with your TCL TV U49C7006.
If this is the case, go to the website of the manufacturer of your remote control, and go in its product sheet.
Then, enter the code indicated by the Support team you have previously contacted.
TCL TV U49C7006 locked in “hotel” or “hospital” mode
Hotels and hospitals sometimes change their television equipment and leave your future TCL TV U49C7006 to the streets.
What a great deal! Until you realize, by turning on the television, that it is protected and thus locked by a “hotel” or “hospital” mode.
Find all the information about TCL TV U49C7006 in our articles.
Do not panic! It is possible to unlock your TCL TV U49C7006 locked in “hotel” or “hospital” mode! To do this, press the “Menu” buttons on the TV and the remote control simultaneously, starting with the menu button on the TV.
This for about 7 seconds.
The factory menu will appear.
Press the “Menu” button on the remote control again, then “OK” to select the line: “[Manufacturer name] hotel/hospital mode setup”.
You are in the hotel or hospital mode menu. Select “No” on the first line with the “OK” button on the remote control. Press the “Menu” button on the remote control and turn off your TCL TV U49C7006. Finally, turn on the TV.
There you go! You just have to set it up as you wish.
A password not deleted on TCL TV U49C7006
You wanted to make a good deal by buying a second-hand TCL TV U49C7006, but a nasty surprise awaits you when turning it on or configuring it: the former owner has locked the access with a password and has forgotten to tell you.
And give it to you! The easiest first step to unlock your TCL TV U49C7006 password is to call back, or send a message to the former owner.
However, he or she may have forgotten it! In that case, do not get upset.
The default codes are 0000, 1234, 1111, 7777 or 9999.
Your television does not lock like a phone, you can try as many as you want.
If none of these works, you will have to take the user manual, or go to the website of the manufacturer of your TCL TV U49C7006.
Then, go in its product sheet to download the manual.
In the help section, you will find a password to enter to redefine the password.
Enter it and redefine the password. Finally, in the settings of your television, deactivate your password.
To conclude on unlocking your TCL TV U49C7006
We’ve just seen how to unlock your TCL TV U49C7006.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step. We hope we helped you unlocking your TCL TV U49C7006!
How do I unlock channels on my TCL TV?
– Select the TV as Input (Using the “Input” key on your remote)
– Press the “Menu button” to open the menu.
– Choose the “Setup” option.
– Make sure the “Signal Type” is set to “Antenna”
– Select “Channel Scan”
How do I reset my TCL TV without the password?
– Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel.
– Continue to hold the RESET button for approximately 12 seconds.
– Release the RESET button.
What is the default PIN for TCL?
The default SIM PIN is 1111.
FIX TCL SMART TV STUCK ON LOGO || TCL TV STUCK ON STARTUP SCREEN
9 ancillary questions
How can I do a hard reset?
A hard resetresetIn a computer or data transmission system, a reset clears any pending errors or events and brings a system to normal condition or an initial state, usually in a controlled manner.https://en.wikipedia.org › wiki › Reset_(computing)Reset (computing) – Wikipedia is when you press and hold in on the button for 5-10 seconds and then let go.
The hard reset on a router resets all the router settings to factory default settings.
Do smart TVs need to be reset?
Smart TV.
TVs are doing much more than they used to, so they too need a break every now and then as well.
According to Shull, you should be restarting your smart TV at least once a month. Doing so helps clean out the clutter, and prevent freezing mid-stream, sign-in troubles, and unresponsive services.
How do I hard reset my TCL Smart TV?
Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel. Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
Release the RESET button.
How do I force reset my TCL TV?
From the TCL Android TV remote control, press the Settings button. Scroll to More Settings > Device Preference > Reset. Select Factory data Reset on the Factory data Reset warning screen. Select Erase Everything.
How do I get all the channels on my TCL TV?
– In TV mode, press the SETTINGS button on your remote.
– Select Channel.
– Select Channel Scan.
– Press OK/► to enter.
– Press ▲/▼ to select Country/Region.
– Press OK to enter.
How do I force a factory reset on my TV?
– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.
What is the default password for TCL Smart TV?
TCL Router Login Guide The default username for your TCL router is admin.
The default password is admin.
Enter the username & password, hit “Enter” and now you should see the control panel of your router.
How do you hard reset a smart TV?
– On the TV remote control, press the HELP button or press the (Input) button, and then select Help.
– Select Manual (Help Guide).
– Select Settings.
– Select Using the Quick Settings → Settings → System → About → Reset → Factory data reset → Erase everything → Yes.
Can I watch regular TV on a TCL Smart TV?
Watching Live TV on a TCL Roku TV.
TCL Roku TVs recently launched the Live TV Zone.
Users simply turned on their TVs, and the Live TV Zone had been added to the left-hand navigation menu, right below Home and Featured Free.
Launching the Live TV Zone opens a world of possibilities to enjoy your Live TV.
You may also be interested in the following articles:
- How to connect headphones to TCL U65C7006
- How to connect your TCL U55C7006
- How to reset a normal color on TCL U55C7006
You still have issues? Our team of experts and passionate could help you, feel free to contact us.