How to set digital terrestrial (DTT) channels on QILIVE Q.32161
When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV QILIVE Q.32161.
This setting consists of a channel search on your QILIVE Q.32161 so that these are received by your TV.
In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.
Automatic channel search without DTT adapter on QILIVE Q.32161
If you do not have a DTT adapter, here’s how to proceed: start by turning on your QILIVE Q.32161, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your QILIVE Q.32161.
For the next steps, please do not select “update” on your QILIVE Q.32161!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of QILIVE Q.32161, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your QILIVE Q.32161.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Automatic channel search with DTT adapter via QILIVE Q.32161
If you have a DTT adapter, here’s how to proceed: start by turning on your QILIVE Q.32161, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.
Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on your model.
Find all the information about QILIVE Q.32161 in our articles.
During the next steps, please do not select “update” on your QILIVE Q.32161 as previously stated!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your QILIVE Q.32161.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Manual channel search on your QILIVE Q.32161
It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on QILIVE Q.32161 is your solution! However, it is a complicated manipulation that takes a little more time.
If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.
If you do not have one, use the remote control of your QILIVE Q.32161.
Retrieve channel’s canal number
To start the operation, you must have the canal number of the channel you wish to search manually on your QILIVE Q.32161.
To do this, use the “My DTT coverage” search engine on the Ofcom official website.
Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.
You may then be able to watch it on your QILIVE Q.32161.
Start manual channel search on QILIVE Q.32161
Start by pressing “Menu” and go to “Configuration”.
It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.
Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.
The hardest is done, you can now go check the presence of the channel on your QILIVE Q.32161!
To conclude on setting channels on your QILIVE Q.32161
We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your QILIVE Q.32161.
However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.
How do I set up local channels on my TV?
If you’ve been wondering how to get local channels on a smart TV, you’ll either need to purchase a high-definition digital TV antenna or download a free app or two from your TV’s app store.
Using an antenna only has a one-time cost and doesn’t even require an internet connection.
How do I scan for DTV channels?
Press “set-up” or “menu” on the TV remote control or converter box. Select “channels,” “antenna,” or other similar terminology.
Click “scan,” “auto-tune,” “channel search,” “auto-program,” or other similar terminology.
The TV will do the rest.
How do I tune my TV with coaxial cable?
Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the back of your TV and to the antenna or cable TV wall jack. Plug your TV’s power adapter into a power outlet, then turn on your TV. Press INPUT to open the INPUT SOURCE list. to highlight TV, then press ENTER.
How to SEARCH and ORDER CHANNELS on Qilive Television Android TV 🔎 VALID for all ANDROID TV ✅
11 ancillary questions
What does DTV no signal mean?
A “No Signal”, “No Source”, or “No Input” message will appear on your TV screen if the TV is not receiving a signal from your TV box.
This is often a result of either the TV box being powered off, not being properly connected to the TV, or the TV being set to the wrong input.
Do all TV have a digital tuner?
YOUR TV MUST SUPPORT A COAX CONNECTION AND A CLEAR QAM DIGITAL TV TUNER.
Most major brand flat screen TVs manufactured after 2006 support both ATSC (Advanced Television Systems Committee) and QAM (quadrature amplitude modulation) digital tuners.
ATSC is used to receive digital channels over the air.
Is there a difference in TV antennas?
Some long-range antennas can receive signals from 125 miles away.
Longer range antennas typically cost more.
An antenna’s reception can also be affected by hilly terrain, trees and tall buildings.
Even the height of the TV station’s transmitting tower can make a different in signal strength.
What is the difference between antenna DTV and antenna TV?
There are huge differences between digital antennas and analog antennas.
Analog antennas were specially designed to only pick up analog signals.
On the other hand, digital antennas can receive and interpret digital signals.
Analog antennas have lower frequencies while digital antennas have higher frequencies.
How do I know if my TV is DTV?
If your television has the words ATSC, DTV, Digital Ready, HD Ready, HDTV, Digital Tuner, Integrated Digital Tuner, or Digital Receiver printed on it, then it includes a digital tuner.
Do more expensive antennas work better?
One surprise was that we found little correlation between price and performance.
Cheaper antennas often did as well as—or better than—more expensive models.
What makes an antenna work better?
If possible, place your indoor TV antenna in an attic or a second-story location, preferably by a window. Sometimes objects in the room or roofing materials will interfere with the signals, so it pays to try a few different attic locations.
What is the difference between DTV and TV?
Compared to analog television, DTV offers improved picture quality, multiple channels of programming on the same frequency, special features such as digital video recording (DVR) capabilities and interactive features like digital program guides (EPGs).
Why is my TV not finding digital channels?
First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.
If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.
Do smart TVs have a built-in antenna?
While smart TVs typically come with built-in antennas, they are used for Bluetooth or Wi-Fi connectivity — not for picking up free-to-air channels.
You can always try using a less sophisticated analog antenna, but there’s a good chance you’ll experience signal problems.
How do I set up DTV on my Samsung TV?
– Press Home to open the Samsung Smart Hub.
– Enter DIRECTV STREAM in the Search box.
– Choose DIRECTV STREAM, then Install.
– Select the app to open it.
You may also be interested in the following articles:
- How to record on QILIVE Q.24161
- How to reset a normal color on QILIVE Q.1324
- How to stop or activate audiodescription on QILIVE Q.1127
You still have issues? Our team of experts and passionate could help you, feel free to contact us.