How to set DTT channels on LG 60UH615V

How to set digital terrestrial (DTT) channels on LG 60UH615V

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV LG 60UH615V.

This setting consists of a channel search on your LG 60UH615V so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on LG 60UH615V

If you do not have a DTT adapter, here’s how to proceed: start by turning on your LG 60UH615V, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your LG 60UH615V.

For the next steps, please do not select “update” on your LG 60UH615V!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of LG 60UH615V, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 60UH615V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via LG 60UH615V

If you have a DTT adapter, here’s how to proceed: start by turning on your LG 60UH615V, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about LG 60UH615V in our articles.

During the next steps, please do not select “update” on your LG 60UH615V as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 60UH615V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your LG 60UH615V

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on LG 60UH615V is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your LG 60UH615V.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your LG 60UH615V.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your LG 60UH615V.

Start manual channel search on LG 60UH615V

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your LG 60UH615V!

To conclude on setting channels on your LG 60UH615V

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your LG 60UH615V.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

How do I get DTV channels on my LG TV?

– Select ‘All Settings’ then press ‘OK’ on your remote control.
– Select ‘Programmes’
– Select ‘Programme Tuning & Settings’
– Select ‘Auto Tuning’.
– Select ‘Antenna’.

Make sure this is the only option selected.
– Select ‘Dignital Only Search’.

How do I tune my LG TV to satellite channels?

Using your “magic remote control”, press the “settings” button and navigate to your “all settings”. Under this menu, locate to “general”, “programmes” and to “programme tuning & settings”. Select the programme tuning models and your LGLGLG is a leading manufacturer of consumer and commercial products ranging from TVs, home appliances, air solutions, monitors, service robots, automotive components and its premium LG SIGNATURE and intelligent LG ThinQ brands are familiar names world over.https://www.lg.com › global › investor-relations-company-infoCompany Information | Investor Relations | LG Global TV will automatically tune for you to enjoy.

What does DTV mean on LG TV?

Digital television (DTV) is the transmission of television signals using a digital broadcast format rather than conventional analog methods.

Sort LG webOS TV channels (DTV) (LG 4K NanoCell TV 43″ – 86″) Edit programs Instructions

8 ancillary questions

How do I get DTV channel?

Connect your digital antenna to your television’s coaxial antenna-in connection. Look for the cable/antenna option in your television’s settings menu and switch it to antenna.

If you have an analog television, you need to connect a DTV converter box between your antenna and your television.

What is DTV on my television?

The digital television (DTV) transition refers to the switch from analog to digital broadcast television.

All full-power television stations have stopped broadcasting in analog, and now broadcast only in digital.

What is the difference between cable and DTV cable?

IF YOU ARE A CABLE SUBSCRIBER, YOU SHOULD BE AWARE: “Digital broadcast” refers to the method of transmission of broadcast signals over-the-air, while “digital cable” refers to the way in which some — or even all — of a cable company’s signals are transmitted through its cable wires or fiber.

What does DTV mean on my TV?

digital television

How do I change my TV to DTV?

What is the difference between TV and DTV?

Compared to analog television, DTV offers improved picture quality, multiple channels of programming on the same frequency, special features such as digital video recording (DVR) capabilities and interactive features like digital program guides (EPGs).

How do I know if my TV is DTV?

When did TVs get digital tuners?

Most homes acquired a digital converter box to make their television ready for the change.

On June 12, 2009, the FCC required all high-power analog U.S. television stations to turn off their signals and move to a digital-only transmission.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.