How to reset the sound and audio settings on THOMSON 32HB5426
Sometimes the sound or audio system of your THOMSON 32HB5426 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your THOMSON 32HB5426. We will see in this article solutions for each problem stated above.
A “beep” sound from your THOMSON 32HB5426
When you turn on your THOMSON 32HB5426, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your THOMSON 32HB5426. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on THOMSON 32HB5426, you must disassemble to the back of your THOMSON 32HB5426 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your THOMSON 32HB5426
The first simple step in this case is to check if your TV, model THOMSON 32HB5426, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your THOMSON 32HB5426.
Find all the information about THOMSON 32HB5426 in our articles.
Offset sound on THOMSON 32HB5426
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV THOMSON 32HB5426.
Shifted sound from your THOMSON 32HB5426 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your THOMSON 32HB5426, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your THOMSON 32HB5426, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your THOMSON 32HB5426
Some TVs like your THOMSON 32HB5426 have a “Sound delay” option.
If this has been set on your THOMSON 32HB5426, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on THOMSON 32HB5426
We have just seen how to reset the sound on TV THOMSON 32HB5426.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your THOMSON 32HB5426.
Unlock TV Thomson Code With Metasploit 🤜 #Shorts #subscribe #android #metasploitable
7 ancillary questions
What sound mode should I use Samsung?
– Standard: Balanced sound where no tones are emphasized, such as the voices or bass.
– Optimized: Specific effects are more powerful and sounds are more spacious.
– Amplify: Amplify mid and high tones of the sound.
This is useful when voices are difficult to understand.
What are the best settings for home theater speakers?
The front speakers should be set about 45 degrees forward from the central listening position, while the back should be about 135 degrees behind, as shown in this diagram. For the subwoofer, avoid placing it flush with a corner of the room or within another cabinet like an entertainment center.
What is the best sound setting for home theater?
A good 5.1-channel system will give you a full surround sound experience.
Most DVD and Blu-ray™ media, some Super Audio CDs (SACDs), broadcast TV, and many streaming sources are in 5.1-channel format. Going to 7.1 channels improves the directionality of sound effects and helps you feel more of your entertainment.
Do all TVs support 5.1 surround sound?
You may not be experiencing true surround sound even if your soundbar, or home theatre system supports it.
The reason for this is that while many TVs will accept a Dolby 5.1 channel encoded as an input, it will not pass through 5.1 channel audio, as they downmix the audio to a 2 channel stereo track for output.
What setting should soundbar be on?
The setting you need is called Output Device and you can find it in the audio menu of your television.
In this menu, select External Speakers.
Your television will now transmit all audio to the soundbar.
How do I reset the sound on my smart TV?
– 1 From Smart Hub panel, Select Settings.
– 2 Select Sound.
– 3 Select Expert Settings.
– 4 Select Reset Sound.
– 5 Select Reset to reset all sound settings.
Does my TV support Dolby Digital?
If you want to transmit Dolby Atmos from your TV to your AV receiver or soundbar, your TV must be equipped with at least HDMI ARC.
As we mentioned above, HDMI ARC works with Dolby Atmos/Dolby Digital Plus, but if your TV is equipped with the newer HDMI eARC standard, it will also work with Dolby Atmos/Dolby TrueHD.5 days ago
You may also be interested in the following articles:
- How to connect your THOMSON 32HC3101 – Noir LED HD
- How to go online with a THOMSON 40FS3013
- How to update THOMSON 55UC6406
You still have issues? Our team of experts and passionate could help you, feel free to contact us.