How to reset the sound and audio settings on TCL U55X9006 série X2 Xess
Sometimes the sound or audio system of your TCL U55X9006 série X2 Xess does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your TCL U55X9006 série X2 Xess. We will see in this article solutions for each problem stated above.
A “beep” sound from your TCL U55X9006 série X2 Xess
When you turn on your TCL U55X9006 série X2 Xess, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your TCL U55X9006 série X2 Xess.
But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on TCL U55X9006 série X2 Xess, you must disassemble to the back of your TCL U55X9006 série X2 Xess TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your TCL U55X9006 série X2 Xess
The first simple step in this case is to check if your TV, model TCL U55X9006 série X2 Xess, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
Find all the information about TCL U55X9006 série X2 Xess in our articles.
The sound must be returned to normal on your TCL U55X9006 série X2 Xess.
Offset sound on TCL U55X9006 série X2 Xess
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV TCL U55X9006 série X2 Xess.
Shifted sound from your TCL U55X9006 série X2 Xess on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your TCL U55X9006 série X2 Xess, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your TCL U55X9006 série X2 Xess, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your TCL U55X9006 série X2 Xess
Some TVs like your TCL U55X9006 série X2 Xess have a “Sound delay” option.
If this has been set on your TCL U55X9006 série X2 Xess, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on TCL U55X9006 série X2 Xess
We have just seen how to reset the sound on TV TCL U55X9006 série X2 Xess.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your TCL U55X9006 série X2 Xess.
How do I unmute my Android TV?
Make sure the volume level is not set to zero (0) or mute.
Using the remote, press the volume up button to increase the volume level of the TV or press the Mute button to unmute the TV.
The volume buttons can be found on the right side of the remote.
TCL U55X9006 XESS X2 TV – SDR picture settings and tips
7 ancillary questions
What are the best settings for home theater speakers?
The front speakers should be set about 45 degrees forward from the central listening position, while the back should be about 135 degrees behind, as shown in this diagram. For the subwoofer, avoid placing it flush with a corner of the room or within another cabinet like an entertainment center.
What is better for sound HDMI or optical?
The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on streaming services such as Dolby Atmos and DTS HD Master Audio.
These formats can’t be transmitted across optical.
In terms of simplicity, HDMI also passes video signals.
How do I make my TV sound clearer?
– Changing your TV’s sound mode can often improve quality.
– Your TV’s equalizer settings let you take control and configure the sound the way you want it.
– Advanced sound processing modes may improve audio quality, so experiment turning them on or off.
What is the best sound setting for home theater?
A good 5.1-channel system will give you a full surround sound experience.
Most DVD and Blu-ray™ media, some Super Audio CDs (SACDs), broadcast TV, and many streaming sources are in 5.1-channel format. Going to 7.1 channels improves the directionality of sound effects and helps you feel more of your entertainment.
How do I get the best sound from my TCL TV?
– Menu sounds: Select whether to play a sound when pressing a button from the remote control to select menu options.
– Balance: Adjust the level of sound sent to the left and right speakers.
Does TCL TV have good sound quality?
The TCL 6 Series/R646 2021 QLED is the best-sounding mid-range TV we’ve tested.
It’s a great overall TV available in a few different sizes, from 55 to 75 inches, and it combines its great picture quality with good sound quality.6 days ago
Which audio output is best?
And, in our experience, compared to optical, a coaxial connection does tend to sound better.
That’s because it has greater bandwidth available, meaning it can support higher quality audio up to 24-bit/192kHz. Optical is usually restricted to 96kHz.
You may also be interested in the following articles:
- How to record on TCL U70C7006 HDR – Smart TV
- How to stop or activate audiodescription on TCL TV LED 50DP660
- How to reset sound and audio settings on TCL U55C7006
You still have issues? Our team of experts and passionate could help you, feel free to contact us.