How to reset sound and audio settings on SELECLINE 39265

How to reset the sound and audio settings on SELECLINE 39265

Sometimes the sound or audio system of your SELECLINE 39265 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your SELECLINE 39265. We will see in this article solutions for each problem stated above.

A “beep” sound from your SELECLINE 39265

When you turn on your SELECLINE 39265, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your SELECLINE 39265. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on SELECLINE 39265, you must disassemble to the back of your SELECLINE 39265 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your SELECLINE 39265

The first simple step in this case is to check if your TV, model SELECLINE 39265, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your SELECLINE 39265.

Find all the information about SELECLINE 39265 in our articles.

Offset sound on SELECLINE 39265

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV SELECLINE 39265.

Shifted sound from your SELECLINE 39265 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your SELECLINE 39265, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your SELECLINE 39265, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your SELECLINE 39265

Some TVs like your SELECLINE 39265 have a “Sound delay” option.

If this has been set on your SELECLINE 39265, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on SELECLINE 39265

We have just seen how to reset the sound on TV SELECLINE 39265.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your SELECLINE 39265.

What are the best TV equalizer settings for clear voice?

What are the best TV equalizer settings for dialogue? Well, the clarity of a voice is found in the mid-frequencies – say from 2 kHz to 6 kHz.

This should help to amplify the dialogue and make it cut through better.

What sound setting is best for TV?

Standard—Balances treble and bass.

This setting is good for watching standard TV broadcasts.

Theater—Enhances treble and bass for a rich sound experience.

This setting is good for watching DVDs, Blu-ray discs, and HDTV.

How do I restore the sound on my TV?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

Vibe 405 5 in 1 universal remote EASY SETUP!

5 ancillary questions

Why is my TV muted?

If the TV has a Headphone/Audio-Out settings in the Sound menu, set it to Audio-Out.

Make sure all A/V cable connections are properly connected to the TV.

Test the TV using another source like a VCR, DVD player or Blu-ray Disc player.

Perform software updates and check if the issue will improve.

What do you do if your TV is stuck on mute?

Make sure the volume level is not set to zero (0) or mute.

Using the remote, press the volume up button to increase the volume level of the TV or press the Mute button to unmute the TV.

The volume buttons can be found on the right side of the remote.

What are good equalizer settings for voice?

600 Hz–3,000 Hz (Mids)—the range that humans can hear the best.

The majority of the sound of vocals is here, so EQing this range represents the perfect equalizer settings to play with if you want to affect someone’s voice.

3,000 Hz–8,000 Hz (Upper Mids)—most audiophiles handle this range with care.

Why is my TV going to mute by itself?

Many Samsung TV models have an internal mute setting.

This setting permanently mutes the volume on the TV itself so you can listen to the audio through an external sound system.

If the internal mute sets to “On,” you will not hear sound through the TV.

Why does my TV suddenly have no sound?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.