How to reset the sound and audio settings on SELECLINE 32285
Sometimes the sound or audio system of your SELECLINE 32285 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your SELECLINE 32285. We will see in this article solutions for each problem stated above.
A “beep” sound from your SELECLINE 32285
When you turn on your SELECLINE 32285, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your SELECLINE 32285. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on SELECLINE 32285, you must disassemble to the back of your SELECLINE 32285 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your SELECLINE 32285
The first simple step in this case is to check if your TV, model SELECLINE 32285, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your SELECLINE 32285.
Find all the information about SELECLINE 32285 in our articles.
Offset sound on SELECLINE 32285
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV SELECLINE 32285.
Shifted sound from your SELECLINE 32285 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your SELECLINE 32285, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your SELECLINE 32285, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your SELECLINE 32285
Some TVs like your SELECLINE 32285 have a “Sound delay” option.
If this has been set on your SELECLINE 32285, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on SELECLINE 32285
We have just seen how to reset the sound on TV SELECLINE 32285.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your SELECLINE 32285.
How do I fix my TV without sound but pictures?
Temporarily unplug all the TV connection cables and reboot the TV set. Sometimes, temporarily unplugging the connected cables might help resolve your TV no sound issue.
This temporary reset works to clear the short-term memory of the television, and also helps to resolve some other issues.
How do I restore the sound on my TV?
– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.
How can I improve the dialogue sound on my TV?
First look for something called “Dynamic Range Compression” (some TVs have an option called “Night Mode,” which is similar).
The idea of this setting is to even out (or compress) loud noises like explosions and softer ones like dialogue.
By bringing them closer together in volume, you will be able to hear words better.
Why is the sound on TV not working?
Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.
Make sure that the TV’s audio input settings are on.
Make sure the HDMI cable is connected.
📺👉SENCOR LED TV SLE 40F14TCS
8 ancillary questions
Why is background noise louder than voices?
Information.
Most average home receivers have low fidelity speakers which accentuate the upper mid-ranges and highs.
The human voice tends to be in the mid-audio range.
The rest of the sound spectrum that helps keep these two components separate and distinct is lost.
Why is there no sound on my TV HDMI?
Check the sound settings on your TV – the sound might be disabled.
Talking of computers, here are some common things causing sound issues: A wrong sound driver or an incompatible playback device are selected in the settings.
Or, speakers are selected instead of the HDMI port in default sound settings.
Why is there no audio out on my TV?
Make sure the optical cable is firmly connected to both the TV and the home theater or stereo system.
Try changing the channel on the TV to another digital broadcast. Go into the Sound or Speakers menu of the TV and select External Speakers or Audio System.
Why is the background sound louder than the voices on my TV?
Many home TVs have relatively low fidelity speakers which accentuate upper mid-range and high frequencies, while the human voice tends to be in the mid-audio range.
The rest of the sound spectrum, which would ideally help keep music and voices distinct, is often deficient on home televisions.
Why does my LG TV suddenly have no sound?
First, make sure the volume is turned up and the audio settings on your TV are correct.
If that doesn’t work, try resetting the HDMI connection and using a different HDMI cable or audio output port.
If all else fails, contact LG customer support for assistance.
How do I unmute my TV?
– Verify if issue is affecting all channels or apps.
– Check your cable connections.
– Confirm TV’s audio settings.
Why is there suddenly no sound on my Samsung TV?
On your TV, navigate to Settings, then select Support, and then select Self Diagnosis.
Select Sound Test and wait for the test to finish.
If the test reveals a problem, you can try resetting the sound. From Settings, select Sound, then select Expert Settings, and then select Reset Sound.
Why do I have picture but no sound on my TV?
Check the volume on your TV.
It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.
Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.
You may also be interested in the following articles:
- SELECLINE 32S17 TV no longer lights or stays on standby
- How to reset sound and audio settings on SELECLINE 20800
- How to reset a normal color on SELECLINE 32285
You still have issues? Our team of experts and passionate could help you, feel free to contact us.