How to reset sound and audio settings on HISENSE TV LED H55A6550

How to reset the sound and audio settings on HISENSE TV LED H55A6550

Sometimes the sound or audio system of your HISENSE TV LED H55A6550 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your HISENSE TV LED H55A6550. We will see in this article solutions for each problem stated above.

A “beep” sound from your HISENSE TV LED H55A6550

When you turn on your HISENSE TV LED H55A6550, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your HISENSE TV LED H55A6550. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on HISENSE TV LED H55A6550, you must disassemble to the back of your HISENSE TV LED H55A6550 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your HISENSE TV LED H55A6550

The first simple step in this case is to check if your TV, model HISENSE TV LED H55A6550, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your HISENSE TV LED H55A6550.

Find all the information about HISENSE TV LED H55A6550 in our articles.

Offset sound on HISENSE TV LED H55A6550

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV HISENSE TV LED H55A6550.

Shifted sound from your HISENSE TV LED H55A6550 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your HISENSE TV LED H55A6550, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your HISENSE TV LED H55A6550, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your HISENSE TV LED H55A6550

Some TVs like your HISENSE TV LED H55A6550 have a “Sound delay” option.

If this has been set on your HISENSE TV LED H55A6550, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on HISENSE TV LED H55A6550

We have just seen how to reset the sound on TV HISENSE TV LED H55A6550.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your HISENSE TV LED H55A6550.

How do I change the audio output on my Hisense TV?

– Settings > Sound.
– Settings > Sound > Audio Ouput > ARC.
– Settings > Sound > eARC > On.
– Settings > Sound > Dolby Atmos > On.
– Settings > Advanced Settings > Digital Audio Out > Dolby Digital Plus.

How do you fix the TV Sound?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

How do I find audio settings on my TV?

– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.

How to Factory Reset Your Hisense TV

9 ancillary questions

How do I connect a soundbar to my Hisense TV?

Connect to HDMI (ARC) Socket If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable.

1 Using a High Speed HDMI cable (not included), connect the HDMI OUT (ARC)-TO TV connector on your Soundbar to the HDMI ARC connector on the TV.

How do I get sound back on my Samsung Smart TV?

– Using your TV’s remote, press the Volume up button.
– If you cannot see the volume displayed on the screen, navigate to Settings, then select Sound, and then select Sound Output.
– If your TV is connected to an external device, you can check the volume settings on the device as well.

Why did my smart TV lose sound?

If you own a smart TV, your sound might not work due to a firmware update.

Check for a new firmware update for your TV and install it.

A minor software glitch can corrupt a TV’s audio output.

Turning it off and turning it back on should fix the problem.

How do you get sound from a TV to a soundbar?

Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV. Connect the other end to the TV OUT (ARC) port on your sound bar.

Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

Why is my TV having sound issues?

Make sure your TV and receiver aren’t muted.

Adjust the volume on your remote.

Make sure the output on your TV is set to stereo or surround sound. Unplug your receiver, wait at least 60 seconds, and plug it back in.

How do I connect external Speakers to my Hisense TV?

– The HDMI ports are situated on the back of the TV.
– Insert the HDMI cable into the desired HDMI port.
– Insert the other end of the HDMI cable into the HDMI ARC port.
– Press Quick menu.
– Scroll to Settings and press OK.
– Scroll to Sound and press OK.
– Scroll to Speakers and press OK.

Why do I have picture but no sound on my TV?

Check the volume on your TV.

It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.

Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.

How do I reset the sound on my smart TV?

– 1 From Smart Hub panel, Select Settings.
– 2 Select Sound.
– 3 Select Expert Settings.
– 4 Select Reset Sound.
– 5 Select Reset to reset all sound settings.

Why isn’t the sound on my TV working?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.