How to reset the sound and audio settings on HISENSE TV LED H50A6550
Sometimes the sound or audio system of your HISENSE TV LED H50A6550 does not work properly.
There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.
In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your HISENSE TV LED H50A6550. We will see in this article solutions for each problem stated above.
A “beep” sound from your HISENSE TV LED H50A6550
When you turn on your HISENSE TV LED H50A6550, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your HISENSE TV LED H50A6550. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on HISENSE TV LED H50A6550, you must disassemble to the back of your HISENSE TV LED H50A6550 TV and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
No sound on your HISENSE TV LED H50A6550
The first simple step in this case is to check if your TV, model HISENSE TV LED H50A6550, and decoder are not “mute” or if the sound is not too low on each.
If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.
If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal on your HISENSE TV LED H50A6550.
Find all the information about HISENSE TV LED H50A6550 in our articles.
Offset sound on HISENSE TV LED H50A6550
You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV HISENSE TV LED H50A6550.
Shifted sound from your HISENSE TV LED H50A6550 on a channel only
When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.
If you watch a lot of programs in Original Version on your HISENSE TV LED H50A6550, it may be your case.
To fix this, go to the channel with the problem.
Take the remote control of your decoder and press “Menu”, then “Language setting”.
In the “Audio” section displayed on the screen of your HISENSE TV LED H50A6550, select the channel’s original language.
Here it is! The sound is normally set back on the picture!
Sound delay on your HISENSE TV LED H50A6550
Some TVs like your HISENSE TV LED H50A6550 have a “Sound delay” option.
If this has been set on your HISENSE TV LED H50A6550, go to the “Menu” of your decoder, and go to “Settings”.
Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.
The sound must be returned to normal.
To conclude on reseting the sound and audio settings on HISENSE TV LED H50A6550
We have just seen how to reset the sound on TV HISENSE TV LED H50A6550.
However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your HISENSE TV LED H50A6550.
How do I reset my Hisense LED TV?
At the back or bottom of your Hisense TVHisense TVHisense Group is a Chinese multinational major appliance and electronics manufacturer headquartered in Qingdao, Shandong Province, China.https://en.wikipedia.org › wiki › HisenseHisense – Wikipedia, there is a reset hole.
Look around your TV to find a small hole labeled “RESET”. Bend a paper clip to insert into the hole.
Push the clip inside the hole and press it for about 15 seconds.
How do I change the audio output on my Hisense TV?
– Settings > Sound.
– Settings > Sound > Audio Ouput > ARC.
– Settings > Sound > eARC > On.
– Settings > Sound > Dolby Atmos > On.
– Settings > Advanced Settings > Digital Audio Out > Dolby Digital Plus.
How do you fix the TV Sound?
– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.
Hisense LED TV – How to Turn On / Off Hotel Mode? HiSense Smart TV (H40BE5000)
9 ancillary questions
Do soundbars work with older TVs?
While most modern soundbars rely on an HDMI cable to connect to HDTVs and 4K TVs, there are still plenty of soundbars on the market with legacy audio inputs that will work with older TVs—and yes, that includes CRT (aka “tube”) TVs that are decades old.
How do I fix my Hisense TV when the screen goes black?
You must reset your Hisense TV if it is stuck on the black screen of death. Wait 60 seconds after unplugging your television; and then press and hold the TV’s power button for 30 seconds.
Reconnect your Hisense TV after 60 seconds, and it should work.
How do I reset my sound?
– Check your audio and sound source.
– Go to sound settings.
– Check external speakers.
– Turn to a Windows troubleshooter.
– Go to sound settings to run troubleshooter in another way.
– In the sound settings screen, check the Volume mixer.
– Click the Reset button.
– Check the sound control panel.
How do I know if my TV speakers are blown?
How do I know if my TV speakers are blown? The most common aural indication of a blown speaker is an unpleasant buzzing or scratching sound, by itself or roughly at the pitch of the note the speaker is attempting to reproduce.
Or there could be no sound at all.
How do I fix the sound quality on my TV?
– Changing your TV’s sound mode can often improve quality.
– Your TV’s equalizer settings let you take control and configure the sound the way you want it.
– Advanced sound processing modes may improve audio quality, so experiment turning them on or off.
Can you use any soundbar with Hisense TV?
Hisense TVs are compatible with most soundbars that use a standard audio connection such as HDMI, optical or 3.5mm audio jack.
However, it’s always a good idea to check the compatibility of your specific TV and soundbar before making a purchase.17 hours ago
How can I improve my TV sound and hear dialogue better?
First look for something called “Dynamic Range Compression” (some TVs have an option called “Night Mode,” which is similar).
The idea of this setting is to even out (or compress) loud noises like explosions and softer ones like dialogue.
By bringing them closer together in volume, you will be able to hear words better.
Where is the PCM setting on Hisense TV?
– Go into your Settings Menu, Select “DEVICE PREFERENCES”
– Select “SOUND”
– Go to “DIGITAL OPTICAL OUTPUT”
– Set it to “PCM”
Why is the sound on my TV not good?
Check the audio settings on your TV and connected devices.
Turn off and unplug your TV and connected devices.
Inspect the TV cables and ports, then check the ones on your devices as well.
Are they connected correctly and firmly?May 11, 2021
You may also be interested in the following articles:
- How to stop or activate audiodescription on HISENSE TV LED H50A6550
- HISENSE TV LED H55A6550 TV no longer lights or stays on standby
- How to connect headphones to HISENSE TV LED H50A6550
You still have issues? Our team of experts and passionate could help you, feel free to contact us.