How to reset sound and audio settings on CHANGHONG LED32D1900

How to reset the sound and audio settings on CHANGHONG LED32D1900

Sometimes the sound or audio system of your CHANGHONG LED32D1900 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your CHANGHONG LED32D1900. We will see in this article solutions for each problem stated above.

A “beep” sound from your CHANGHONG LED32D1900

When you turn on your CHANGHONG LED32D1900, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your CHANGHONG LED32D1900. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on CHANGHONG LED32D1900, you must disassemble to the back of your CHANGHONG LED32D1900 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your CHANGHONG LED32D1900

The first simple step in this case is to check if your TV, model CHANGHONG LED32D1900, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your CHANGHONG LED32D1900.

Find all the information about CHANGHONG LED32D1900 in our articles.

Offset sound on CHANGHONG LED32D1900

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV CHANGHONG LED32D1900.

Shifted sound from your CHANGHONG LED32D1900 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your CHANGHONG LED32D1900, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your CHANGHONG LED32D1900, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your CHANGHONG LED32D1900

Some TVs like your CHANGHONG LED32D1900 have a “Sound delay” option.

If this has been set on your CHANGHONG LED32D1900, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on CHANGHONG LED32D1900

We have just seen how to reset the sound on TV CHANGHONG LED32D1900.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your CHANGHONG LED32D1900.

How do I reset my TV sound settings?

1 Press the Home button on your remote control. 2 Using the directional pad on your remote, navigate to and select Settings.

3 Navigate to and select Sound > Expert Settings.

4 Navigate to and select Reset Sound.

Why is my TV audio not working?

Increase the volume on the TV and/or your connected media device (streaming player, Blu-ray player, cable or satellite box, etc.). Check the audio settings on your TV and connected devices.

Turn off and unplug your TV and connected devices.

Inspect the TV cables and ports, then check the ones on your devices as well.

How do I find audio settings on my TV?

– Use your remote to access the TV’s settings menu, then look for a section called Audio, Sound or something similar.
– At the top of the menu should be a selection of presets such as Movie, User or Standard.

Changhong 32 service mode

6 ancillary questions

How do you reset a TV remote control?

– Open the battery compartment cover and remove the batteries.
– Press and hold the Power button for three seconds.
– Insert the batteries again and close the battery compartment cover.

How do I get sound on my TV through HDMI?

– Prepare an HDMI cable.
– Connect the cable to the TV’s HDMI IN (ARC).
– Connect to the HDMI OUT (TV-ARC) port of the speaker that you want to connect.
– Turn the speakers on that are connected to the TV.
– The TV sound will be played through your external speakers.

Why can’t I hear sound on my TV through HDMI?

Check the sound settings on your TV – the sound might be disabled.

Talking of computers, here are some common things causing sound issues: A wrong sound driver or an incompatible playback device are selected in the settings.

Or, speakers are selected instead of the HDMI port in default sound settings.

Why do I have picture but no sound on my TV?

Check the volume on your TV.

It sounds silly, but sometimes just making sure your TV isn’t muted or set to a very low volume will solve the problem.

Most televisions display the sound level on the screen as you adjust the volume; look for that in the corner of the screen as you press your remote’s volume button.

How do you fix a TV with no sound?

– Check the Speakers setting on the TV.
– Increase the volume of the TV.
– Make sure the MUTE option of the TV isn’t enabled.
– Make sure no headphones are connected to the TV.
– Perform a power reset on the TV.
– If using a set-top box with a volume control, increase the volume of the set-top box.

What would cause your TV to have no sound?

Turning your TV off and back on again is one of the first things you should do if the volume isn’t working or is stuck. Verify the audio settings.

Make sure that the TV’s audio input settings are on.

Make sure the HDMI cable is connected.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.