How to reset a normal color on SHARP LC43CFG6452E 43′

How to reset a normal color on your SHARP LC43CFG6452E 43′

You wanted to watch TV when, suddenly, you noticed your SHARP LC43CFG6452E 43′ displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.

This is why we have chosen to introduce you in this article how to reset a normal color on your SHARP LC43CFG6452E 43′. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your SHARP LC43CFG6452E 43′.

SCART on your SHARP LC43CFG6452E 43′

The SCART cable is the cable that allows an audio and video connection between your decoder and your television.

It is the cousin of the hdmi cable.

When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.

In particular, your SHARP LC43CFG6452E 43′ can have fluorescent colors instead of normal colors.

In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.

If this does not work, you must replace your cable.

You can find them easily in stores.

When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.

Your SHARP LC43CFG6452E 43′ settings

It sometimes happens that after a power failure, your TV settings will change without your knowledge.

It also happens that a child takes your remote control and plays with it before turning off the television.

In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.

Find all the information about How to reset a normal color on SHARP LC43CFG6452E 43′ in our articles.

Do not panic ! Here is how to reset a normal color on your SHARP LC43CFG6452E 43′ with standard TV settings.

Take the remote control of your SHARP LC43CFG6452E 43′, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

There, go to “Image”.

You are in the menu that adjusts the image quality of your SHARP LC43CFG6452E 43′. Go to the saturation gauge.

You may have to go to a sub-menu called “Colors”.

If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your SHARP LC43CFG6452E 43′.

If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.

Then, if your television is in black and white, go to the “RGB” gauge of your SHARP LC43CFG6452E 43′, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.

It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your SHARP LC43CFG6452E 43′.

You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.

Capacitors on SHARP LC43CFG6452E 43′

Finally, the capacitors may be at fault when the colors of your SHARP LC43CFG6452E 43′ are not displayed correctly.

Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.

If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your SHARP LC43CFG6452E 43′, and ask a professional to do it if you are not an expert about electricity.

To repair the capacitors, you must go to the back of your SHARP LC43CFG6452E 43′ television and remove the protective cover if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your SHARP LC43CFG6452E 43′. Wait a few minutes for the capacitors to cool down.

And now, the colors work again!

To conclude on resetting a normal color on your SHARP LC43CFG6452E 43′

We’ve just seen how to put a normal color on your SHARP LC43CFG6452E 43′.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your SHARP LC43CFG6452E 43′!

Is there a reset on a Sharp TV?

– Press menu and go to Initial setup.
– Select Reset.
– Select Yes on the popup to delete the data.
– The TV will display Deleting individual info.

After Installing.

Restart Automatically.

Please Wait.
– The TV will restart, and the TV should be factory reset.

How do I reset my Sharp LCD TV color?

– Unplug the TV.
– Hold both the Volume Down and Input Button at the same time and plug the TV back in.
– The TV should turn on and display a blue box at the top left corner.
– At the same time, press the Volume Down and Channel Down Button, and a menu will come up.

Where is the reset button on my Sharp TV?

3 ways to reset TVs, Sharp TV fix review

3 ancillary questions

What to do when your TV turns on but the screen is black?

Unplug the TV from the wall, and, if possible, remove the power cord from the back of the TV to perform a soft reset. Wait 30 seconds, and plug the TV back into a working outlet to test it again.

If you’re still having screen issues, you might want to bring in an expert — they’ll know how to fix your TV’s black screen.

How do I hard reset my TV?

Power Reset Unplug the AC power cord (mains lead).

If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet.

Then press the power button on the TV and wait for 2 minutes, and plug the power cord (mains lead) back into the electrical outlet.

How to do a hard reset on Sharp TV?

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.