How to reset a normal color on your SAMSUNG TV LED UE55NU7305
You wanted to watch TV when, suddenly, you noticed your SAMSUNG TV LED UE55NU7305 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your SAMSUNG TV LED UE55NU7305. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your SAMSUNG TV LED UE55NU7305.
SCART on your SAMSUNG TV LED UE55NU7305
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your SAMSUNG TV LED UE55NU7305 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your SAMSUNG TV LED UE55NU7305 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on SAMSUNG TV LED UE55NU7305 in our articles.
Do not panic ! Here is how to reset a normal color on your SAMSUNG TV LED UE55NU7305 with standard TV settings.
Take the remote control of your SAMSUNG TV LED UE55NU7305, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your SAMSUNG TV LED UE55NU7305. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your SAMSUNG TV LED UE55NU7305.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your SAMSUNG TV LED UE55NU7305, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your SAMSUNG TV LED UE55NU7305.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on SAMSUNG TV LED UE55NU7305
Finally, the capacitors may be at fault when the colors of your SAMSUNG TV LED UE55NU7305 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your SAMSUNG TV LED UE55NU7305, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your SAMSUNG TV LED UE55NU7305 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your SAMSUNG TV LED UE55NU7305. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your SAMSUNG TV LED UE55NU7305
We’ve just seen how to put a normal color on your SAMSUNG TV LED UE55NU7305.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your SAMSUNG TV LED UE55NU7305!
How do I reset the color on my Samsung TV?
– Adjusting Color.
– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.
Why is my Samsung TV color messed up?
If the colour is wrong or missing when using a connected device, make sure that the cables are connected correctly.
Incorrect or loose connections may cause colour problems or a blank screen.
The correct video connection is set up as shown in the diagram below.
How do I manually reset my Samsung TV?
– Open Settings, and then select General.
– Select Reset, enter your PIN (0000 is the default), and then select Reset.
– To complete the reset, select OK.
Your TV will restart automatically.
– If these steps don’t match your TV, navigate to Settings, select Support, and then select Self Diagnosis.
HOW TO FIX TV Curved SAMSUNG 4K SMART UA49NU7300S PROBLEM Dark middle image problems backlight
10 ancillary questions
Why can’t I change picture mode on Samsung TV?
If Picture Mode is grayed out, HDR + is turned on.
If Auto Program is grayed out, there is no coaxial cable connected to the TV.
If Film Mode is grayed out, the input signal is not TV, AV, Component (480i or 1080i), or HDMI (1080i).
What picture mode should my Samsung TV be on?
– Standard: This is the Default mode that’s suitable for most viewing environments.
– Dynamic: Pictures are brighter and clearer in bright viewing environments.
– Natural: Reduces eye strain for a comfortable viewing experience.
– Movie: Suitable for watching TV or movies in a dark room.
How do I reset the color on my Samsung TV?
– 1 Open Settings, and select Picture.
– 2 Select Expert Settings, and then select Reset Picture.
– 3 Select Yes to confirm.
How do I factory reset my Samsung TV with no picture?
– Open Settings, then select Support.
– Select Device Care.
Note: On some models, select Support instead.
– Select Self Diagnosis, then select Reset Smart Hub, and then enter your PIN.
– After the reset is complete, select OK.
How do I force a factory reset on my TV?
– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.
How do I reset my Samsung TV without picture?
– Unplug your TV from power.
– On your TV, press and hold the power button and the volume down button.
– As you’re holding the buttons, have another person plug the TV back in.
– Follow the on-screen steps to finish the reset.
How do I reset my Samsung TV picture mode?
– 1 Press the Home button on your remote control and then select Menu.
– 2 Navigate to Settings then All Settings.
– 3 Select Picture then Expert Settings.
– 3 Choose Reset Picture.
This will restore all picture settings to the factory default.
How do I get normal TV on my Samsung?
– You can press the Source button on your remote and then select the source labeled TV.
– You can press Home, navigate to Menu, and then select Connected Devices.
From here you can select which source your TV is connected to.
How do I reset my Samsung TV to factory settings with a remote?
– Step 1: open the menu. Press the menu button on the remote.
– Step 2: open General and Privacy.
Select the menu General and Privacy.
– Step 3: choose ‘Reset’ Select the option ‘Reset’ and press the enter button.
– Step 4: enter your PIN code.
– Step 5: confirm the reset.
How do I reset my Samsung TV if it turned off and I don’t have a remote for it? Turn the TV off at the power point.
Then, hold start button on the back of the TV or under the front panel for 15 seconds.
You may also be interested in the following articles:
- How to connect headphones to SAMSUNG UE50MU6125
- How to unlock your SAMSUNG UE49J5200
- How to go online with a SAMSUNG UE40M5005
You still have issues? Our team of experts and passionate could help you, feel free to contact us.