How to reset a normal color on your SAMSUNG 55NU7105 TV LED
You wanted to watch TV when, suddenly, you noticed your SAMSUNG 55NU7105 TV LED displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your SAMSUNG 55NU7105 TV LED. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your SAMSUNG 55NU7105 TV LED.
SCART on your SAMSUNG 55NU7105 TV LED
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your SAMSUNG 55NU7105 TV LED can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your SAMSUNG 55NU7105 TV LED settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on SAMSUNG 55NU7105 TV LED in our articles.
Do not panic ! Here is how to reset a normal color on your SAMSUNG 55NU7105 TV LED with standard TV settings.
Take the remote control of your SAMSUNG 55NU7105 TV LED, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your SAMSUNG 55NU7105 TV LED. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your SAMSUNG 55NU7105 TV LED.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your SAMSUNG 55NU7105 TV LED, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your SAMSUNG 55NU7105 TV LED.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on SAMSUNG 55NU7105 TV LED
Finally, the capacitors may be at fault when the colors of your SAMSUNG 55NU7105 TV LED are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your SAMSUNG 55NU7105 TV LED, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your SAMSUNG 55NU7105 TV LED television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your SAMSUNG 55NU7105 TV LED. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your SAMSUNG 55NU7105 TV LED
We’ve just seen how to put a normal color on your SAMSUNG 55NU7105 TV LED.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your SAMSUNG 55NU7105 TV LED!
How do I get the color back on my Samsung TV?
– Adjusting Color.
– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.
Why is my Samsung TV color messed up?
If the colour is wrong or missing when using a connected device, make sure that the cables are connected correctly.
Incorrect or loose connections may cause colour problems or a blank screen.
The correct video connection is set up as shown in the diagram below.
What are normal picture settings for Samsung TV?
– Standard: This is the Default mode that’s suitable for most viewing environments.
– Dynamic: Pictures are brighter and clearer in bright viewing environments.
– Natural: Reduces eye strain for a comfortable viewing experience.
– Movie: Suitable for watching TV or movies in a dark room.
How do I get my TV color back to normal?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How to Reset Picture Settings on Samsung TV
6 ancillary questions
What is the normal picture mode?
This picture mode is often the mode manufacturer’s set their televisions to.
If you haven’t messed with the settings on your TV since you bought it, you’re most likely watching television in standard mode.
What it looks like: Moderate contrast, sharpness and brightness with a “blue-ish” hue.
What are normal TV picture settings?
– Picture Mode: Use Movie/Cinema Mode.
– Brightness: Set at 50% …
– Backlight: Lower Is Better.
– Contrast: Set at 100% …
– Sharpness: Set at 0% …
– Color: Set at 50% …
– Hue/Tint: Set at 0% …
– Color Temperature/Tone: Set to Warm.
How do I brighten my TV screen?
Press the Quick Settings button on your TV remote control. Press the Left arrow button to select Picture settings and then press the Enter button. Press the Down arrow button to select Brightness and then press the Enter button.
Why did my Samsung TV go black but still has sound?
Black Screen Samsung TV But Has Sound In particular, try these: Unplug your Samsung TV from the power, wait for a minute and plug it back in.
Make sure your HDMI cable is fully inserted, or move it to another socket. Perform a factory reset.
Why does my TV color look weird?
How do faulty inputs affect TV color? Mismatched, damaged, or poorly fitted cables will lead to color distortions where the pictures appear to be fuzzy, blurry or sometimes flicker.
Do hardware faults cause color issues? Severe TV color problems may be due to malfunctioned hardware or screen damage.
Why is the color on my TV so dark?
If Power Saving is set to Low or High, the screen becomes dark.
Example of setting method: Select Settings – System Settings – Eco and set Power Saving to Normal. Some TVs have a Light Sensor which makes the picture become brighter or lower depending on room lighting conditions.
You may also be interested in the following articles:
- How to reset sound and audio settings on SAMSUNG UE49M6305
- How to unlock your SAMSUNG UE32J5000
- How to connect your SAMSUNG UE55MU7005
You still have issues? Our team of experts and passionate could help you, feel free to contact us.