How to reset a normal color on your QILIVE Q.32161
You wanted to watch TV when, suddenly, you noticed your QILIVE Q.32161 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your QILIVE Q.32161. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your QILIVE Q.32161.
SCART on your QILIVE Q.32161
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your QILIVE Q.32161 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your QILIVE Q.32161 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on QILIVE Q.32161 in our articles.
Do not panic ! Here is how to reset a normal color on your QILIVE Q.32161 with standard TV settings.
Take the remote control of your QILIVE Q.32161, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your QILIVE Q.32161. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your QILIVE Q.32161.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your QILIVE Q.32161, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your QILIVE Q.32161.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on QILIVE Q.32161
Finally, the capacitors may be at fault when the colors of your QILIVE Q.32161 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your QILIVE Q.32161, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your QILIVE Q.32161 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your QILIVE Q.32161. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your QILIVE Q.32161
We’ve just seen how to put a normal color on your QILIVE Q.32161.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your QILIVE Q.32161!
What is saturation in TV settings?
The Color control (sometimes called “Saturation”) is used to adjust the relative balance between the chroma (color) channels and the luma (brightness) channel.
If Color is set too high, the colors on screen will be oversaturated, and if it’s set too low, the colors will be muted and washed out.
How do I get my TV back to color?
Turn the sharpness level to the highest point, then down—then added color.
Next, ensure all wires at the back of the TV and Cable TV box are tightly fitted and plugged into the right inputs.
Doing this might bring colors back to normal.
If you use an antenna, be sure to check it as well.
Why is my TV not showing color?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How do I change my TV color from black and white?
Many TV owners have reported that their black and white screen issues resulted from poor picture settings.
An easy fix to this issue is to calibrate the color through the TV settings menu.
Then, navigate through the settings and try to adjust them to fill in color.
How to SEARCH and ORDER CHANNELS on Qilive Television Android TV 🔎 VALID for all ANDROID TV ✅
11 ancillary questions
What contrast is best for your eyes?
When it comes to color combinations, your eyes prefer black text on a white or slightly yellow background. Other dark-on-light combinations work fine for most people.
Avoid low contrast text/background color schemes.
If you wear contacts, your eyes have to work harder when staring at a screen.
Is there a hard reset for a LG Smart TV?
A hard reset can solve memory and software-related issues, but also erases all the settings you’ve changed on the TV.
To restart without a remote, press and hold the “Power” button on the TV for about 10 seconds, unplug it for about 1 minute, then plug it back in and turn it on.
Why is the color on my TV black?
TV black screens are commonly caused by cable connection issues, issues with input devices, or outdated firmware updates.
Worst case scenario, the power supply board could have malfunctioned. Could a loose cable cause a TV black screen? Perhaps the most common cause of a black screen is connection issues.
How do I get the color back on my Samsung TV?
– Adjusting Color.
– Press the MENU button on the remote control.
– The main menu appears on the screen. Press the ▲ or ▼ button to select the Picture mode.
– Then press the ENTER button to access the Picture menu.
– Press the ▲ or ▼ button to adjust the Color saturation of the picture.
Why did my TV screen go black but still have sound?
Backlight issues: LCD screens use a backlight to light up images displayed on the screen.
If the backlight experiences any technical issues, it won’t light the display, and the screen will be black, but the user will still hear sound in the background.
To fix this problem, TV owners need to repair their backlights.
Should I adjust contrast or brightness?
Brightness increases the overall lightness of the image—for example, making dark colors lighter and light colors whiter—while contrast adjusts the difference between the darkest and lightest colors.
Below is an example of adjustments made to the brightness and contrast of an image.
How do I reset my LG Smart TV without a remote?
How do I get the color back on my LG TV?
If colors are not displaying correctly on your LG TV, it typically indicates that your Dolby Vision display is set to Vivid mode.
To resolve this issue, change your display mode to either Movie Dark for dim viewing environments or Movie Bright for brighter rooms.
What is the best contrast and saturation settings?
Most people are comfortable with the contrast set around 60 to 70 percent.
Additionally, you can explore Phonetic Computer Eyewear, which offers solutions to help prevent the symptoms of digital eye strain. Once you have your contrast where you like it, you can move on to the brightness setting.
How do I manually reset my LG TV?
– Step 1: open the menu. Use the remote to open the menu.
– Step 2: open ‘All settings’ Select the option All settings in the list of options and press the OK button.
– Step 3: navigate to General. Select the options General.
– Step 4: go to Reset to Initial Settings.
Go down until you see the Revert to factory settings option.
Should contrast be higher than brightness on TV?
The contrast determines how bright the brightest parts of the screen are.
If the contrast is too low, the image looks boring.
If it’s too high, your image loses details and the bright parts are overexposed. When adjusting the contrast, it’s useful to look at a bright image.
You may also be interested in the following articles:
- How to unlock your QILIVE Q.32161 LED
- How to go online with a QILIVE Q.32161 LED
- How to set DTT channels on QILIVE Q.1324
You still have issues? Our team of experts and passionate could help you, feel free to contact us.