How to reset a normal color on your PHILIPS TV 43PFS4112
You wanted to watch TV when, suddenly, you noticed your PHILIPS TV 43PFS4112 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your PHILIPS TV 43PFS4112. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your PHILIPS TV 43PFS4112.
SCART on your PHILIPS TV 43PFS4112
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your PHILIPS TV 43PFS4112 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your PHILIPS TV 43PFS4112 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on PHILIPS TV 43PFS4112 in our articles.
Do not panic ! Here is how to reset a normal color on your PHILIPS TV 43PFS4112 with standard TV settings.
Take the remote control of your PHILIPS TV 43PFS4112, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your PHILIPS TV 43PFS4112. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your PHILIPS TV 43PFS4112.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your PHILIPS TV 43PFS4112, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your PHILIPS TV 43PFS4112.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on PHILIPS TV 43PFS4112
Finally, the capacitors may be at fault when the colors of your PHILIPS TV 43PFS4112 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your PHILIPS TV 43PFS4112, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your PHILIPS TV 43PFS4112 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your PHILIPS TV 43PFS4112. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your PHILIPS TV 43PFS4112
We’ve just seen how to put a normal color on your PHILIPS TV 43PFS4112.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your PHILIPS TV 43PFS4112!
How do I fix color on a Philips TV?
– Press the menu button.
– Select PICTURE.
– Select COLOR.
– Use button left/right to adjust for best picture.
– Press the ‘MENU’ button to exit the menu.
How do I fix the color distortion on my TV?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How do I reset my Philips TV picture settings?
How to Reset Phillips Smart TV – Factory Reset Easy Guide
6 ancillary questions
How do I know if my TV screen is bad?
If red, blue, or greenish stripes interrupt your viewing experience, there’s probably something wrong with your TV’s hardware.
Lines across a TV screen are usually caused by loose or frayed cables within the screen, which is why knocking on the side or back of the TV can be a temporary fix.
Why does my TV screen look distorted?
If your TV picture is breaking up, cutting in and out, or pixelating (looks like everything is a bunch of squares), then you probably are experiencing a weak signal. Check all of the connections from the wall to your cable box and from the cable box to your TV to ensure that all connections are tight.
When time replace flat screen TV?
The average lifespan of an LED at maximum or close-to-maximum brightness is 40,000 to 60,000 hours, or roughly 4.5 to 6.8 years.
If you aren’t watching TV for 24 hours a day (and I hope you’re not), an LED TV like the 5-Series could last around 13 years, provided none of the other components fail beforehand.
How do I run a picture test on my TV?
– Turn the TV On.
– Press Menu on your TV remote control.
– Select Support.
– Select Self Diagnosis.
– Select Picture Test.
– You will now be taken through a series of picture tests.
How do I get the color back on my Philips Smart TV?
– Press ‘MENU’ button on the remote control.
– Press right to select PICTURE.
– Press cursor down to select AUTO PICTURE.
– There will display a list of predefined picture settings where you can chose the most liked setting.
How do you know when your flat screen TV is going bad?
If your screen is displaying bars, lines, dead pixels and other abnormalities, your flat-screen TV might be going bad.
It might also be dying if it won’t turn on, the sound quality is bad or the screen keeps flickering or fading.
You may also be interested in the following articles:
- How to reset a normal color on PHILIPS TV LED 43PUS7303
- How to connect your PHILIPS TV 43PFS4112
- How to record on PHILIPS TV 22PFS4022
You still have issues? Our team of experts and passionate could help you, feel free to contact us.