How to reset a normal color on your CHANGHONG LED32D1900
You wanted to watch TV when, suddenly, you noticed your CHANGHONG LED32D1900 displayed catastrophic colors! Fluorescent, black and white, colors too saturated, or a burr in the colors at startup… These color problems are really unpleasant for your viewer experience.
This is why we have chosen to introduce you in this article how to reset a normal color on your CHANGHONG LED32D1900. We will see the problem of connecting the SCART, the possible TV settings, and the quality of the capacitors of your CHANGHONG LED32D1900.
SCART on your CHANGHONG LED32D1900
The SCART cable is the cable that allows an audio and video connection between your decoder and your television.
It is the cousin of the hdmi cable.
When it is loose or damaged, the quality of the audio or video on your television may drop dramatically.
In particular, your CHANGHONG LED32D1900 can have fluorescent colors instead of normal colors.
In this case, first check the connection of your SCART. Unplug it, clean its inputs and outputs, and reconnect it.
If this does not work, you must replace your cable.
You can find them easily in stores.
When you connect the new cable, be careful to turn off the TV and the decoder to avoid handling problems.
Your CHANGHONG LED32D1900 settings
It sometimes happens that after a power failure, your TV settings will change without your knowledge.
It also happens that a child takes your remote control and plays with it before turning off the television.
In both cases, your television may suddenly appear in black and white, or on the contrary, with saturated colors.
Find all the information about How to reset a normal color on CHANGHONG LED32D1900 in our articles.
Do not panic ! Here is how to reset a normal color on your CHANGHONG LED32D1900 with standard TV settings.
Take the remote control of your CHANGHONG LED32D1900, and press “Menu” then select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
There, go to “Image”.
You are in the menu that adjusts the image quality of your CHANGHONG LED32D1900. Go to the saturation gauge.
You may have to go to a sub-menu called “Colors”.
If your image is in black and white, increase the saturation using the left and right directionnal buttons displayed on your CHANGHONG LED32D1900.
If your image is too saturated in color, lower the saturation using the “left” and “right” directional buttons.
Then, if your television is in black and white, go to the “RGB” gauge of your CHANGHONG LED32D1900, which can be divided into several gauges like “R1”, “R2”, “G1”, etc… Increase the gauges until the color is obtained.
It is not necessary to adjust these gauges if your television had the colors saturated. Finally, choose the display mode of the image you prefer for your CHANGHONG LED32D1900.
You will have the choice between “Normal”, “Cinema”, “Dynamic, and others.” This can help you find the display mode best suited to your tastes.
Capacitors on CHANGHONG LED32D1900
Finally, the capacitors may be at fault when the colors of your CHANGHONG LED32D1900 are not displayed correctly.
Notably at start-up, an image is displayed with colors that “drool”, then disappears after a little time of use.
If your capacitors work badly when cold, at start-up then, you have to change them. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulation and two metal wires.
Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
Indeed, this procedure is highly risky as you may get electrocuted. Please unplug the power from your CHANGHONG LED32D1900, and ask a professional to do it if you are not an expert about electricity.
To repair the capacitors, you must go to the back of your CHANGHONG LED32D1900 television and remove the protective cover if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of bread in a store, in the right place and with the help of a welder, assemble them to your CHANGHONG LED32D1900. Wait a few minutes for the capacitors to cool down.
And now, the colors work again!
To conclude on resetting a normal color on your CHANGHONG LED32D1900
We’ve just seen how to put a normal color on your CHANGHONG LED32D1900.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to do so. We hope it helped fixing your CHANGHONG LED32D1900!
Changhong 32 service mode
8 ancillary questions
How do I reset my smart TV remote?
Remove the batteries, and then press the Power button for eight seconds to reset the remote.
Then, reinsert the batteries and try to use the remote again.
Why is my TV not responding to the remote?
There are many reasons that make your remote not work.
However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues.
Press the power button while pointing the remote control at your TV.
Make sure the LED indicator on the TV blinks.
How do I get the color back on my LG TV?
If colors are not displaying correctly on your LG TV, it typically indicates that your Dolby Vision display is set to Vivid mode.
To resolve this issue, change your display mode to either Movie Dark for dim viewing environments or Movie Bright for brighter rooms.
How do I reset my TV to factory settings without a remote?
– Unplug the TV power cord from the electrical socket.
– Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.
How do you reset a TV remote control?
– Open the battery compartment cover and remove the batteries.
– Press and hold the Power button for three seconds.
– Insert the batteries again and close the battery compartment cover.
Why is my TV not showing color?
First, go to your TV’s settings menu and desaturate its color settings until it gets to black and white.
Calibrate the contrasts and brightness so that both the whites are blacks are distinct.
Turn the sharpness level to the highest point, then down—then added color.
How do I pair a new remote to my Samsung TV?
On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV.
If not, it is directly in the bottom center.
Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds.
Your TV will begin syncing with the Smart Remote.
How do I pair my remote to my TV?
You may also be interested in the following articles:
- CHANGHONG LED32D1900 TV no longer lights or stays on standby
- How to update CHANGHONG LED32E2300H
- How to stop or activate audiodescription on CHANGHONG LED32E2300H
You still have issues? Our team of experts and passionate could help you, feel free to contact us.