How to connect your SONY Sony KD49XE7005 BAEP TV LED UHD

How to connect your SONY Sony KD49XE7005 BAEP TV LED UHD

You have just acquired a television and you do not know where to start to turn it on and watch your favorite programs? This article is made for you! We wanted to help you to make the connections from your SONY Sony KD49XE7005 BAEP TV LED UHD television to its peripherals.

To do this, we will explain how to connect your SONY Sony KD49XE7005 BAEP TV LED UHD TV to a power supply first, your TV set secondly, and your DVD player finally.

Connecting power to your SONY Sony KD49XE7005 BAEP TV LED UHD TV

To begin with, we’ll explain how to connect your SONY Sony KD49XE7005 BAEP TV LED UHD TV to a power supply.

This is the simplest manipulation.

In the box containing your TV, you must have been provided with different cables.

Look for one that ends with a plug.

It may be already connected to your TV SONY Sony KD49XE7005 BAEP TV LED UHD.

If this is not the case, connect the other end of the cable to the “power” input of your TV. Finally, plug the plug into a socket outlet.

All you have to do is turn on the TV with its remote control.

Connect your TV set to your SONY Sony KD49XE7005 BAEP TV LED UHD

Plugging in your TV decoder to your SONY Sony KD49XE7005 BAEP TV LED UHD is essential for you to watch channels on your television.

There are two types of decoders: the satellite decoder, and the television decoder, from your service provider.

Connecting the satellite decoder to your SONY Sony KD49XE7005 BAEP TV LED UHD

There are four connections to make when starting up your satellite decoder.

But before anything else, make sure you have a satellite parable! To get started, find the HDMI cable that came with your decoder.

Find all the information about SONY Sony KD49XE7005 BAEP TV LED UHD in our articles.

Connect it in “HDMi In” to your TV SONY Sony KD49XE7005 BAEP TV LED UHD, and “HDMi Out” to your decoder.

Then take the SCART cable to your SONY Sony KD49XE7005 BAEP TV LED UHD.

It has wide ends and is often blue or black.

And connect your television to your decoder.

Then connect the LSB cable from your satellite parable to your decoder.

Finally, you must connect the power supply of your decoder to a power outlet.

Connecting a provider decoder to your SONY Sony KD49XE7005 BAEP TV LED UHD

With the TV decoder of a provider, you must have a satellite parable, a DTT antenna, and a box from the supplier.

First, start by connecting the decoder to the box via the supplied ethernet cable.

Next, connect the decoder to the LSB cable of your satellite parable via the “SAT” input.

And connect the decoder to the DTT antenna via the “RF IN” input. Continue by connecting your decoder to the SONY Sony KD49XE7005 BAEP TV LED UHD with a HDMI cable.

Connect it in “HDMi In” to your TV SONY Sony KD49XE7005 BAEP TV LED UHD, and “HDMi Out” to your decoder.

Finally, connect the power supply via the “power supply” input of your decoder.

Do not forget to plug the other end into a power outlet!

Plug in your DVD player

To plug in a DVD player to your SONY Sony KD49XE7005 BAEP TV LED UHD to watch your favorite movies or series, you need to make 3 connections.

To get started, find the HDMI cable supplied with your DVD player.

Connect it in “HDMi In” to your TV SONY Sony KD49XE7005 BAEP TV LED UHD, and “HDMi Out” to your DVD player.

Then take the scart cable.

It has wide ends and often blue or black.

And connect your DVD player to your decoder.

Finally, you must connect the power supply of your DVD player to a power outlet.

Plug in your amp to your SONY Sony KD49XE7005 BAEP TV LED UHD

Finally, if you want a better sound from your SONY Sony KD49XE7005 BAEP TV LED UHD, you can connect your amp to the television. Begin by preparing the speakers of your amp by plugging them into the sound outputs of the amp.

These are the yellow and blue colored outputs.

Then connect the amplifier to your SONY Sony KD49XE7005 BAEP TV LED UHD TV with the optical cable of your amp.

It plugs into the “Audio optic” or “audio” output of your television. Finally, you must connect the power plug of your amp to a socket.

How do I connect my cable to my Sony TV?

– 1 Plugging in Cables.

HDMI Cable.

HDMI Port. Plug your HDMI cable into your cable box if you have one.
– 2 Power On.

After you have plugged in your cables, press the power button on your Smart TV or on your remote control.
– 3 Auto Start-up.

After turning on your Sony TV, select your language.

Select your connection type.

How do I connect my Sony TV to HDMI?

How do I hook up my DVD player to my Sony Bravia TV?

Blu-ray Disc / DVD Player – HDMI If your BD/DVD player has an HDMI jack (socket), connect it using a HDMI cable.

Please use an authorised HDMI cable bearing the HDMI logo.

Where are the HDMI ports on a Sony Bravia TV?

The Sony Bravia ports are located behind the television.

Sony KD-32W800 BRAVIA 81cm (32 Zoll) Fernseher (Android TV, HDR, Smart TV, 2021 Modell) | Unboxing

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.