SONY KDL40RE450BAEP TV no longer lights or stays on standby

SONY KDL40RE450BAEP no longer starts or stays on standby

You would like to watch your favorite program when, without warning, your SONY KDL40RE450BAEP television decides not to turn on, whereas an hour ago it worked very well.

It can be a frustrating time, especially if your television has no reason to be down.

That’s why we wrote this article to help you when your SONY KDL40RE450BAEP TV does not turn on or stays on standby.

Check the remote control of your SONY KDL40RE450BAEP

It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.

Make sure your remote has charged and properly and has charged batteries.

If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your SONY KDL40RE450BAEP.

If one of these two solutions works, the problem is with your remote control and not with your SONY KDL40RE450BAEP TV.

You can enjoy your program again!

Check connections to your SONY KDL40RE450BAEP

Sometimes, between your SONY KDL40RE450BAEP TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.

Take a look behind your TV and check that the connections are the right ones.

If this is the case, make sure there is power in the outlets.

If everything works fine but your SONY KDL40RE450BAEP TV refuses to turn on, go to the next paragraph.

Check capacitors at the back of your SONY KDL40RE450BAEP

Beware, before doing this operation, make sure you know about electricity and the like.

Find all the information about SONY KDL40RE450BAEP TV in our articles.

If not, please go and see a professional for your SONY KDL40RE450BAEP before doing anything.

In any case, please unplug the electrical wire connected to your SONY KDL40RE450BAEP before touching the back of it.

You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulating piece and metal wires.

These, when spoiled, may be the reason why your SONY KDL40RE450BAEP TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

To repair capacitors on your SONY KDL40RE450BAEP, you must check the back of your SONY KDL40RE450BAEP television and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from your SONY KDL40RE450BAEP.

Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

And now your SONY KDL40RE450BAEP works again!

Run the warranty of your SONY KDL40RE450BAEP

If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your SONY KDL40RE450BAEP TV.

Many retailers will take your SONY KDL40RE450BAEP to repair or provide you with another.

Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your SONY KDL40RE450BAEP, who may provide you with another free of charge as an apology.

Why won’t my Sony TV stay on?

Make sure the AC power cord (mains lead) is properly plugged in.

If your TV has a power cord (mains lead) that can be removed, make sure that it is firmly plugged into the back of the TV.

If the TV has a separate AC power adaptor, check the connection between the adaptor and power cord (mains lead) as well.

How do I get my Sony Bravia TV out of standby mode?

Running a power cycle reset is the quickest and simplest method of fixing a standby issue.

In most cases, cycling the power will resolve the issue and the TV will no longer be stuck in standby mode.

This works for a Sony Bravia reset along with most other models that have Sony standby mode.

What is the lifespan of a Sony Bravia TV?

The average lifespan of an LED at maximum or close-to-maximum brightness is 40,000 to 60,000 hours, or roughly 4.5 to 6.8 years.

If you aren’t watching TV for 24 hours a day (and I hope you’re not), an LED TV like the 5-Series could last around 13 years, provided none of the other components fail beforehand.

How to Fix Your Sony TV That Won’t Turn On – Black Screen Problem

9 ancillary questions

Why did my TV screen randomly go black?

TV black screens are commonly caused by cable connection issues, issues with input devices, or outdated firmware updates.

Worst case scenario, the power supply board could have malfunctioned. Could a loose cable cause a TV black screen? Perhaps the most common cause of a black screen is connection issues.

Why won’t my TV turn on but red light is on?

This means that there is a problem with the On_Off button or a problem with the remote control.

It is also possible that the batteries of the remote are exhausted (or a bad contact) or the window for receiving signals from the remote on the TV is obstructed by some object.

How do I get my TV off of standby mode?

How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.

Why won’t my Samsung TV turn on but the red light is on?

Why Won’t My Samsung TV Turn On But Red Light Is On.

The red light on your Samsung TV typically means that your TV is turned off.

It indicates that your TV is on standby and plugged in.

If the red light on your Samsung TV is blinking, try reconnecting your HDMI cable.

Does the red light mean the TV is on?

The key for TVs is the red standby light, a little red light at the edge of the TV that you aim the remote at.

In normal use, the red standby light is on when the TV is off (indicating the TV is on standby), and the red standby light is off when the TV is in use (or doesn’t have power).

Why does my Sony TV screen go black but sound still works?

Check that POWER SAVER/ENERGY SAVE MODE is set to OFF. Some TVs will turn a screen off but still plays the sound.

If SLEEP TIMER mistakenly was turned ON, then turn it OFF.

A Sleep timer can sometimes be pressed accidentally on the remote and will turn OFF the TV.

How do I fix my TV when the screen goes black?

Unplug the TV from the wall, and, if possible, remove the power cord from the back of the TV to perform a soft reset. Wait 30 seconds, and plug the TV back into a working outlet to test it again.

If you’re still having screen issues, you might want to bring in an expert — they’ll know how to fix your TV’s black screen.

Why does my TV screen keep going black for a few seconds?

Backlight Problems Some TV displays, such as LCD screens, use a backlight to illuminate the picture.

If the backlight burns out or stops working, it will result in a blank TV screen.

To check your TV’s backlight, make sure your TV is on.

Then, turn off the lights in the room and shine a flashlight on the screen.

Why does my Sony Bravia randomly go to home screen?

This is because the Power on behavior settings is set to Home screen.

You can change the TV startup behavior to Last input if you prefer your TV to power on with the last watched TV channel or external input instead. On the remote control, press the Quick Settings button. Select Power on behavior.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.