PHILIPS TV LED 49PUS8303 no longer starts or stays on standby
You would like to watch your favorite program when, without warning, your PHILIPS TV LED 49PUS8303 television decides not to turn on, whereas an hour ago it worked very well.
It can be a frustrating time, especially if your television has no reason to be down.
That’s why we wrote this article to help you when your PHILIPS TV LED 49PUS8303 TV does not turn on or stays on standby.
Check the remote control of your PHILIPS TV LED 49PUS8303
It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.
Make sure your remote has charged and properly and has charged batteries.
If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your PHILIPS TV LED 49PUS8303.
If one of these two solutions works, the problem is with your remote control and not with your PHILIPS TV LED 49PUS8303 TV.
You can enjoy your program again!
Check connections to your PHILIPS TV LED 49PUS8303
Sometimes, between your PHILIPS TV LED 49PUS8303 TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.
Take a look behind your TV and check that the connections are the right ones.
If this is the case, make sure there is power in the outlets.
If everything works fine but your PHILIPS TV LED 49PUS8303 TV refuses to turn on, go to the next paragraph.
Check capacitors at the back of your PHILIPS TV LED 49PUS8303
Beware, before doing this operation, make sure you know about electricity and the like.
Find all the information about PHILIPS TV LED 49PUS8303 TV in our articles.
If not, please go and see a professional for your PHILIPS TV LED 49PUS8303 before doing anything.
In any case, please unplug the electrical wire connected to your PHILIPS TV LED 49PUS8303 before touching the back of it.
You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.
They are made of an insulating piece and metal wires.
These, when spoiled, may be the reason why your PHILIPS TV LED 49PUS8303 TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.
To repair capacitors on your PHILIPS TV LED 49PUS8303, you must check the back of your PHILIPS TV LED 49PUS8303 television and disassemble the protective shell if the capacitors are not already visible.
When you see them, have a pair of pliers, and separate them from your PHILIPS TV LED 49PUS8303.
Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.
And now your PHILIPS TV LED 49PUS8303 works again!
Run the warranty of your PHILIPS TV LED 49PUS8303
If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your PHILIPS TV LED 49PUS8303 TV.
Many retailers will take your PHILIPS TV LED 49PUS8303 to repair or provide you with another.
Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your PHILIPS TV LED 49PUS8303, who may provide you with another free of charge as an apology.
Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice.
Press the cursor down to select RESET AV SETTINGS.
Why does my Philips TV turn off right after I turn it on?
In order to help you save energy, your TV will automatically switch off if no buttons have been pressed (such as press a remote control button or a control on the TV front panel) after a specified time of watching TV.
How do I get my Philips TV out of standby mode?
By pressing the POWER button on the side of the TV, the mode will toggle from OFF to either STANDBY or ON.
If the POWER button is pressed and then the LED on the bezel is red, the TV is in STANDBY mode and will need to be turned on using the remote control.
How long do Philips LED TVS last?
The average lifespan of an LED at maximum or close-to-maximum brightness is 40,000 to 60,000 hours, or roughly 4.5 to 6.8 years.
Philips smart tv no standby light issue fix
9 ancillary questions
How do I get my SONY TV out of standby mode?
Press the arrow or reset button and hold it down for 30 seconds to perform a reset and remove the standby mode setting.
Another factory reset option is to press the power button on the TV.
Hold the reset button on the TV while you press the power button again.
What to do when your LG TV turns on but the screen is black?
– Restart your TV.
– Check both input and output cables.
– Change the picture mode and backlight settings.
– Reset your LG TV to factory settings.
– Contact LG for repair.
How do I stop my SONY TV from turning off automatically?
– On the remote control, press the (Quick Settings) button.
– Select Settings.
– Select System.
– Select Power and Energy.
– Select Auto shut-off, then set it to Off.
How do I switch my SONY TV from safe mode to normal mode?
– To enter Safe mode, follow these steps:
– Press and hold the POWER button of the TV remote control until the a message Power off appears.
– To exit from Safe mode, press and hold the POWER button of the TV remote control until the a message Power off appears.
Why does my TV go into standby mode?
Samsung TV automatically switches to standby mode when there is no signal.
It saves power by turning the TV off automatically when no signal is received from the current source.
Can you reset a TV by unplugging it?
Turn off the TV. Unplug the television power cord (mains lead) from the electrical outlet. Let the television remain without power for 2 minutes.
Plug the power cord (mains lead) back into the electrical outlet.
What do I do when my TV is in standby mode?
– Press “HOME” on the remote.
– Scroll left to settings.
– select system settings.
– down to eco >select>
– Down to idle tv standby>select>
– adjust to ‘off’.
– Use return button to get back to home screen.
What to do if standby light is on TV but won’t turn on?
Unplug the TV, press and hold the power button for 30 seconds.
Plug it back in.
If this does not work, take it to a repair shop.
You may also be interested in the following articles:
- How to record on PHILIPS Philips 7000 Series 55PUS7502 – 139 cm – Smart TV LED – 4K UHD
- How to set DTT channels on PHILIPS TV 32PFS5362
- How to unlock your PHILIPS TV 43PFS4112
You still have issues? Our team of experts and passionate could help you, feel free to contact us.