PHILIPS TV LED 43PUS7303 TV no longer lights or stays on standby

PHILIPS TV LED 43PUS7303 no longer starts or stays on standby

You would like to watch your favorite program when, without warning, your PHILIPS TV LED 43PUS7303 television decides not to turn on, whereas an hour ago it worked very well.

It can be a frustrating time, especially if your television has no reason to be down.

That’s why we wrote this article to help you when your PHILIPS TV LED 43PUS7303 TV does not turn on or stays on standby.

Check the remote control of your PHILIPS TV LED 43PUS7303

It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.

Make sure your remote has charged and properly and has charged batteries.

If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your PHILIPS TV LED 43PUS7303.

If one of these two solutions works, the problem is with your remote control and not with your PHILIPS TV LED 43PUS7303 TV.

You can enjoy your program again!

Check connections to your PHILIPS TV LED 43PUS7303

Sometimes, between your PHILIPS TV LED 43PUS7303 TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.

Take a look behind your TV and check that the connections are the right ones.

If this is the case, make sure there is power in the outlets.

If everything works fine but your PHILIPS TV LED 43PUS7303 TV refuses to turn on, go to the next paragraph.

Check capacitors at the back of your PHILIPS TV LED 43PUS7303

Beware, before doing this operation, make sure you know about electricity and the like.

Find all the information about PHILIPS TV LED 43PUS7303 TV in our articles.

If not, please go and see a professional for your PHILIPS TV LED 43PUS7303 before doing anything.

In any case, please unplug the electrical wire connected to your PHILIPS TV LED 43PUS7303 before touching the back of it.

You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulating piece and metal wires.

These, when spoiled, may be the reason why your PHILIPS TV LED 43PUS7303 TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

To repair capacitors on your PHILIPS TV LED 43PUS7303, you must check the back of your PHILIPS TV LED 43PUS7303 television and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from your PHILIPS TV LED 43PUS7303.

Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

And now your PHILIPS TV LED 43PUS7303 works again!

Run the warranty of your PHILIPS TV LED 43PUS7303

If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your PHILIPS TV LED 43PUS7303 TV.

Many retailers will take your PHILIPS TV LED 43PUS7303 to repair or provide you with another.

Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your PHILIPS TV LED 43PUS7303, who may provide you with another free of charge as an apology.

How do I get my Philips TV out of standby mode?

By pressing the POWER button on the side of the TV, the mode will toggle from OFF to either STANDBY or ON.

If the POWER button is pressed and then the LED on the bezel is red, the TV is in STANDBY mode and will need to be turned on using the remote control.

Why does my Philips TV turn off right after I turn it on?

In order to help you save energy, your TV will automatically switch off if no buttons have been pressed (such as press a remote control button or a control on the TV front panel) after a specified time of watching TV.

Does a Philips TV have a reset button?

Press the ‘MENU’ button. Press the cursor down to select SETTINGS. Press cursor right twice.

Press the cursor down to select RESET AV SETTINGS.

What to do if standby light is on TV but won’t turn on?

Unplug the TV, press and hold the power button for 30 seconds.

Plug it back in.

If this does not work, take it to a repair shop.

How to Fix Your Philips TV That Won’t Turn On – Black Screen Problem

10 ancillary questions

Why is my Sony TV not turning on red light blinking 6 times?

If your Sony TV standby red light blinks 6 times, it means there’s a system error that has to be fixed.

The error could be due to overheated internal components of the system.

The standby light blinks red 6 times too if you connect corrupted devices to the TV.

How do I reset my Philips TV that won’t turn on?

– Check that the TV’s AC power cord is plugged into the power outlet.
– Unplug the TV, wait for 60 seconds.

Then re-insert plug into the mains socket and turn on the TV again.

What causes a TV to go into standby mode?

Samsung TV automatically switches to standby mode when there is no signal.

It saves power by turning the TV off automatically when no signal is received from the current source.

How do I reset my Samsung remote that is blinking red?

Try resetting the remote by pressing the B and C buttons.

Hold them and monitor the remote light on the TV; it should flash to indicate a successful reset.

Afterward, key in 981 to reprogram the remote and get it up and running again for the television.

Why won’t my TV turn on but the red light is on?

This means that there is a problem with the On_Off button or a problem with the remote control.

It is also possible that the batteries of the remote are exhausted (or a bad contact) or the window for receiving signals from the remote on the TV is obstructed by some object.

What do I do when my TV is blinking red?

– Performing a power reset or restart of your TV may solve this issue if it’s caused by a temporary malfunction. Power reset.
– Check if any devices connected to your TV are causing an issue (such as a malfunctioning device or a data communication issue).

Where is the reset button on my Philips TV?

– Press the ‘MENU’ button.
– Press the cursor down to select SETTINGS.
– Press cursor right twice.
– Press the cursor down to select RESET AV SETTINGS.
– Press cursor right on START NOW. Press the ‘OK’ button.
– Press the ‘MENU’ button to exit the menu.

Why is the red light blinking?

FLASHING RED—A flashing red signal light means exactly the same as a stop sign: STOP! After stopping, proceed when safe and observe the right-of-way rules.

RED ARROW—A red arrow means STOP until the green signal or green arrow appears.

A turn may not be made against a red arrow.

How do I reset my Philips TV without the remote?

Why is my LG TV not turning on red light blinking?

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.