PANASONIC 49FX600 TV no longer lights or stays on standby

PANASONIC 49FX600 no longer starts or stays on standby

You would like to watch your favorite program when, without warning, your PANASONIC 49FX600 television decides not to turn on, whereas an hour ago it worked very well.

It can be a frustrating time, especially if your television has no reason to be down.

That’s why we wrote this article to help you when your PANASONIC 49FX600 TV does not turn on or stays on standby.

Check the remote control of your PANASONIC 49FX600

It may sound trivial, but if your remote does not work, your TV will not turn on when you use it.

Make sure your remote has charged and properly and has charged batteries.

If so, try using your phone and its remote control application to turn on your TV. Or simply press the on / off button on your PANASONIC 49FX600.

If one of these two solutions works, the problem is with your remote control and not with your PANASONIC 49FX600 TV.

You can enjoy your program again!

Check connections to your PANASONIC 49FX600

Sometimes, between your PANASONIC 49FX600 TV, decoder, internet box, DVD player, speakers and stereos, and even your game station, it may get a little tangled with all the cables behind your television. Some, with heat or sudden movement, disconnect or no longer function.

Take a look behind your TV and check that the connections are the right ones.

If this is the case, make sure there is power in the outlets.

If everything works fine but your PANASONIC 49FX600 TV refuses to turn on, go to the next paragraph.

Check capacitors at the back of your PANASONIC 49FX600

Beware, before doing this operation, make sure you know about electricity and the like.

Find all the information about PANASONIC 49FX600 TV in our articles.

If not, please go and see a professional for your PANASONIC 49FX600 before doing anything.

In any case, please unplug the electrical wire connected to your PANASONIC 49FX600 before touching the back of it.

You could get electrocuted if not doing so. Besides, we strongly advise you to work with gloves which can fully protect you from electricity before doing this operation. Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulating piece and metal wires.

These, when spoiled, may be the reason why your PANASONIC 49FX600 TV does not turn on or remains on standby. But they can be changed! Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

To repair capacitors on your PANASONIC 49FX600, you must check the back of your PANASONIC 49FX600 television and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from your PANASONIC 49FX600.

Then place the capacitors, which you can buy for the price of bred in a store, in the right place and using a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

And now your PANASONIC 49FX600 works again!

Run the warranty of your PANASONIC 49FX600

If your remote control works, your connections are good, and the capacitors do not look damaged, you can then play back the guarantee of your PANASONIC 49FX600 TV.

Many retailers will take your PANASONIC 49FX600 to repair or provide you with another.

Some TV models may have a hardware problem and the manufacturer may be at fault. Do not hesitate to ask for a model exchange with the manufacturer of your PANASONIC 49FX600, who may provide you with another free of charge as an apology.

How do I reset my Panasonic TV that won’t turn on?

– 1 | Press Menu On Your Remote.

Take your Panasonic remote control and simply click ‘menu’.
– 2 | Go To Setup. Select setup on the left of the TV screen.
– 3 | Select System.
– 4 | Click Factory Defaults.
– 5 | Select Yes.
– Locate the reset button on the TV.
– Press the reset button.
– Turn the TV back on.

What is the lifespan of a Panasonic TV?

The average lifespan of an LED at maximum or close-to-maximum brightness is 40,000 to 60,000 hours, or roughly 4.5 to 6.8 years.

How do I get my Panasonic TV to come back on?

– Unplug every cable from your TV.
– Ensure the socket your TV was plugged into has power.
– Press the power button on your TV for at least one minute.
– Plug the TV back in.
– Plug one input device.
– Turn your TV on.

HOW TO RESET PANASONIC SMART TV ?

4 ancillary questions

What causes a TV to go into standby mode?

Samsung TV automatically switches to standby mode when there is no signal.

It saves power by turning the TV off automatically when no signal is received from the current source.

How do I get my TV off standby mode?

How do I get my TV off standby without remote? Press and hold the power button located on the main TV unit (not the remote control) and switch on mains supply whilst holding the power button until the unit powers up.

How do you reset a TV without a remote?

Unplug the TV power cord from the electrical socket. Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.

What do I do when my TV is in standby mode?

– Press “HOME” on the remote.
– Scroll left to settings.
– select system settings.
– down to eco >select>
– Down to idle tv standby>select>
– adjust to ‘off’.
– Use return button to get back to home screen.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.