How to unlock your TCL TV LED 50DP660
There are many situations that cause your TCL TV LED 50DP660 to be blocked or locked. First, a few come from small simple technical problems.
Secondly, you may have retrieved a television from a hotel or hospital as they get rid of their old TVs.
In this case, it is blocked in “hotel” or “hospital” mode.
The last one is that you bought a used TCL TV LED 50DP660 and a password is still saved on it.
In all these cases, we are here to help you solve your problem.
Here is how to unlock your TCL TV LED 50DP660.
Simple technical problems locking your TCL TV LED 50DP660
First, check that your remote has charged and ready-to-use batteries.
If so, also check the connections behind your television: are the cables all connected properly and are in good condition? Continue by checking that your boxes and decoders are running and functional.
If red or orange lights are on, this is a bad sign! Finally, you may have chosen to switch to the universal remote control. Unfortunately it may encounter difficulties with your TCL TV LED 50DP660.
If this is the case, go to the website of the manufacturer of your remote control, and go in its product sheet.
Then, enter the code indicated by the Support team you have previously contacted.
TCL TV LED 50DP660 locked in “hotel” or “hospital” mode
Hotels and hospitals sometimes change their television equipment and leave your future TCL TV LED 50DP660 to the streets.
What a great deal! Until you realize, by turning on the television, that it is protected and thus locked by a “hotel” or “hospital” mode.
Find all the information about TCL TV LED 50DP660 in our articles.
Do not panic! It is possible to unlock your TCL TV LED 50DP660 locked in “hotel” or “hospital” mode! To do this, press the “Menu” buttons on the TV and the remote control simultaneously, starting with the menu button on the TV.
This for about 7 seconds.
The factory menu will appear.
Press the “Menu” button on the remote control again, then “OK” to select the line: “[Manufacturer name] hotel/hospital mode setup”.
You are in the hotel or hospital mode menu. Select “No” on the first line with the “OK” button on the remote control. Press the “Menu” button on the remote control and turn off your TCL TV LED 50DP660. Finally, turn on the TV.
There you go! You just have to set it up as you wish.
A password not deleted on TCL TV LED 50DP660
You wanted to make a good deal by buying a second-hand TCL TV LED 50DP660, but a nasty surprise awaits you when turning it on or configuring it: the former owner has locked the access with a password and has forgotten to tell you.
And give it to you! The easiest first step to unlock your TCL TV LED 50DP660 password is to call back, or send a message to the former owner.
However, he or she may have forgotten it! In that case, do not get upset.
The default codes are 0000, 1234, 1111, 7777 or 9999.
Your television does not lock like a phone, you can try as many as you want.
If none of these works, you will have to take the user manual, or go to the website of the manufacturer of your TCL TV LED 50DP660.
Then, go in its product sheet to download the manual.
In the help section, you will find a password to enter to redefine the password.
Enter it and redefine the password. Finally, in the settings of your television, deactivate your password.
To conclude on unlocking your TCL TV LED 50DP660
We’ve just seen how to unlock your TCL TV LED 50DP660.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step. We hope we helped you unlocking your TCL TV LED 50DP660!
How do I reset my TCL TV without the password?
– Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on the TV connector panel.
– Continue to hold the RESET button for approximately 12 seconds.
– Release the RESET button.
From the TCL Android TV remote control, press the Settings button. Scroll to More Settings > Device Preference > Reset.
How do I unlock channels on my TCL TV?
– Select the TV as Input (Using the “Input” key on your remote)
– Press the “Menu button” to open the menu.
– Choose the “Setup” option.
– Make sure the “Signal Type” is set to “Antenna”
– Select “Channel Scan”
How to Factory Reset TCL TV without Remote
9 ancillary questions
How do I find the code for my TCL TV?
These codes come from the TV remote cable providers.
TCL must rely on these companies to provide their codes.
If your remote brand or model is not listed, please contact your provider.
Locate the pinhole Reset button on the back of your TV, near the antenna, HDMI, and audio connections.
Using a straightened paperclip (or similar), press and hold the reset button for at least 20 seconds.
After a moment, your RokuRokuRoku was founded in October 2002 as a limited liability company (LLC), by ReplayTV founder Anthony Wood.
Roku (六) means “six” in the Japanese language, to represent the fact that Roku is the sixth company Wood started.https://en.wikipedia.org › wiki › Roku,_IncRoku, Inc. – Wikipedia TV will restart and display the Recovery Mode screen.
How do I get all the channels on my TCL TV?
– In TV mode, press the SETTINGS button on your remote.
– Select Channel.
– Select Channel Scan.
– Press OK/► to enter.
– Press ▲/▼ to select Country/Region.
– Press OK to enter.
How do I turn off restricted mode on Android TV?
– Sign in to your account.
– From the Home screen, scroll to the Apps row.
– Select YouTube.
– Scroll and select Settings.
– Select Restricted Mode or Safety Mode.
– Select On or Off.
How do I get more channels on my TCL Roku TV?
– Launch the Roku mobile app.
– Tap the Channel Store tab.
– On the Channels tab, select Channel Store from the top menu.
– Press the Search icon.
– Type the channel name on the Search box and select icon to add channel on your list.
– If you have a Roku account PIN, then you will be required to enter it.
What to do when your TCL TV turns on but the screen is black?
The best way to fix the black screen is to restart your TV.
If it does not work, check for loose connections.
If the HDMI cable has worn out, get a new one.
A software update can also help solve the black screen on your TCL TV.1 day ago
How do I watch regular TV on my TCL Roku TV?
Connect the coaxial cable from your HDTV antenna to the “Ant/Cable In” connector on the back of your Roku TV.
Turn on your Roku TV, go to Home and select Live TV.
If Live TV is missing, you can add it by going to Settings > TV inputs > Live TV > Set up input.
How do I get more channels on my TCL TV?
– First, make sure you are on the Antenna TV Input options.
– Press the OK on the TV remote.
– On the left panel, it would display all the available antenna TV channels.
– Press the ▲/▼ to scroll up and down, select and highlight the channel you want to add.
How do I get free channels on my TCL TV?
Launching the Live TV Zone opens a world of possibilities to enjoy your Live TV. First is the famous Live TV Guide, where you will see over 200 free live linear channels, as well as your over-the-air channels you’ve scanned in after connecting your antenna.
You may also be interested in the following articles:
- How to set DTT channels on TCL U65C7006
- How to record on TCL U55C7006
- How to connect your TCL TV LED 50DP660
You still have issues? Our team of experts and passionate could help you, feel free to contact us.