How to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED
There are many situations that cause your SHARP LC50CFE5102E 50 ‘ Full HD D-LED to be blocked or locked. First, a few come from small simple technical problems.
Secondly, you may have retrieved a television from a hotel or hospital as they get rid of their old TVs.
In this case, it is blocked in “hotel” or “hospital” mode.
The last one is that you bought a used SHARP LC50CFE5102E 50 ‘ Full HD D-LED and a password is still saved on it.
In all these cases, we are here to help you solve your problem.
Here is how to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED.
Simple technical problems locking your SHARP LC50CFE5102E 50 ‘ Full HD D-LED
First, check that your remote has charged and ready-to-use batteries.
If so, also check the connections behind your television: are the cables all connected properly and are in good condition? Continue by checking that your boxes and decoders are running and functional.
If red or orange lights are on, this is a bad sign! Finally, you may have chosen to switch to the universal remote control. Unfortunately it may encounter difficulties with your SHARP LC50CFE5102E 50 ‘ Full HD D-LED.
If this is the case, go to the website of the manufacturer of your remote control, and go in its product sheet.
Then, enter the code indicated by the Support team you have previously contacted.
SHARP LC50CFE5102E 50 ‘ Full HD D-LED locked in “hotel” or “hospital” mode
Hotels and hospitals sometimes change their television equipment and leave your future SHARP LC50CFE5102E 50 ‘ Full HD D-LED to the streets.
What a great deal! Until you realize, by turning on the television, that it is protected and thus locked by a “hotel” or “hospital” mode.
Find all the information about SHARP LC50CFE5102E 50 ‘ Full HD D-LED in our articles.
Do not panic! It is possible to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED locked in “hotel” or “hospital” mode! To do this, press the “Menu” buttons on the TV and the remote control simultaneously, starting with the menu button on the TV.
This for about 7 seconds.
The factory menu will appear.
Press the “Menu” button on the remote control again, then “OK” to select the line: “[Manufacturer name] hotel/hospital mode setup”.
You are in the hotel or hospital mode menu. Select “No” on the first line with the “OK” button on the remote control. Press the “Menu” button on the remote control and turn off your SHARP LC50CFE5102E 50 ‘ Full HD D-LED. Finally, turn on the TV.
There you go! You just have to set it up as you wish.
A password not deleted on SHARP LC50CFE5102E 50 ‘ Full HD D-LED
You wanted to make a good deal by buying a second-hand SHARP LC50CFE5102E 50 ‘ Full HD D-LED, but a nasty surprise awaits you when turning it on or configuring it: the former owner has locked the access with a password and has forgotten to tell you.
And give it to you! The easiest first step to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED password is to call back, or send a message to the former owner.
However, he or she may have forgotten it! In that case, do not get upset.
The default codes are 0000, 1234, 1111, 7777 or 9999.
Your television does not lock like a phone, you can try as many as you want.
If none of these works, you will have to take the user manual, or go to the website of the manufacturer of your SHARP LC50CFE5102E 50 ‘ Full HD D-LED.
Then, go in its product sheet to download the manual.
In the help section, you will find a password to enter to redefine the password.
Enter it and redefine the password. Finally, in the settings of your television, deactivate your password.
To conclude on unlocking your SHARP LC50CFE5102E 50 ‘ Full HD D-LED
We’ve just seen how to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step. We hope we helped you unlocking your SHARP LC50CFE5102E 50 ‘ Full HD D-LED!
How do you reset a Sharp 50 inch TV?
Unplug the TV.
Hold the Power Button for 30 seconds.
Plug the TV back in and power it on.
How do I force my Sharp TV to reset?
– Press menu and go to Initial setup.
– Select Reset.
– Select Yes on the popup to delete the data.
– The TV will display Deleting individual info.
After Installing.
Restart Automatically.
Please Wait.
– The TV will restart, and the TV should be factory reset.
How do I reset my TV to factory settings without a remote?
– Unplug the TV power cord from the electrical socket.
– Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.
How To Key Unlock On Sharp TV And LCD TV | Sharp TV Factory Restore Default
7 ancillary questions
How do I force a factory reset on my TV?
– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.
How do you do a hard reset on a Sharp TV?
How do I reset my Sharp TV black screen?
If your Sharp TV won’t turn on, you need to reset it. Unplug your TV and wait a full 60 seconds.
While the TV is unplugged, press and hold the power button for 30 seconds.
After the 60 seconds are up, plug your Sharp TV back in and it should work.
What causes the TV not to show pictures?
The most common reason is that your TV is on the wrong input.
You can typically change the input by pushing a button on your TV remote labelled “input”, “source”, or “TV/Video.” Keep pushing the button to cycle through the inputs until you have your picture back.
How do I fix my Sharp TV when the screen goes black?
The first is to be sure the remote control batteries work or use the power button on the TV to see if it powers on.
The second is to unplug it for sixty seconds and plug it back in to see if the screen lights back up. Next is a hard reset which is done by unplugging the TV and holding the power button for 30 seconds.
How long do you unplug a TV to reset it?
Unplug the television power cord (mains lead) from the electrical outlet. Let the television remain without power for 2 minutes.
Plug the power cord (mains lead) back into the electrical outlet.
What causes a TV screen to go black but still have sound?
Backlight issues: LCD screens use a backlight to light up images displayed on the screen.
If the backlight experiences any technical issues, it won’t light the display, and the screen will be black, but the user will still hear sound in the background.
To fix this problem, TV owners need to repair their backlights.
You may also be interested in the following articles:
- How to go online with a LC55CUF8372ES 55′ LED Ultra HD
- How to unlock your SHARP LC50CFE5102E 50 ‘ Full HD D-LED
- How to stop or activate audiodescription on SHARP LC55CFE6452E 55′ D-LED – HD
You still have issues? Our team of experts and passionate could help you, feel free to contact us.