How to unlock your PHILIPS TV LED 43PUS7303
There are many situations that cause your PHILIPS TV LED 43PUS7303 to be blocked or locked. First, a few come from small simple technical problems.
Secondly, you may have retrieved a television from a hotel or hospital as they get rid of their old TVs.
In this case, it is blocked in “hotel” or “hospital” mode.
The last one is that you bought a used PHILIPS TV LED 43PUS7303 and a password is still saved on it.
In all these cases, we are here to help you solve your problem.
Here is how to unlock your PHILIPS TV LED 43PUS7303.
Simple technical problems locking your PHILIPS TV LED 43PUS7303
First, check that your remote has charged and ready-to-use batteries.
If so, also check the connections behind your television: are the cables all connected properly and are in good condition? Continue by checking that your boxes and decoders are running and functional.
If red or orange lights are on, this is a bad sign! Finally, you may have chosen to switch to the universal remote control. Unfortunately it may encounter difficulties with your PHILIPS TV LED 43PUS7303.
If this is the case, go to the website of the manufacturer of your remote control, and go in its product sheet.
Then, enter the code indicated by the Support team you have previously contacted.
PHILIPS TV LED 43PUS7303 locked in “hotel” or “hospital” mode
Hotels and hospitals sometimes change their television equipment and leave your future PHILIPS TV LED 43PUS7303 to the streets.
What a great deal! Until you realize, by turning on the television, that it is protected and thus locked by a “hotel” or “hospital” mode.
Find all the information about PHILIPS TV LED 43PUS7303 in our articles.
Do not panic! It is possible to unlock your PHILIPS TV LED 43PUS7303 locked in “hotel” or “hospital” mode! To do this, press the “Menu” buttons on the TV and the remote control simultaneously, starting with the menu button on the TV.
This for about 7 seconds.
The factory menu will appear.
Press the “Menu” button on the remote control again, then “OK” to select the line: “[Manufacturer name] hotel/hospital mode setup”.
You are in the hotel or hospital mode menu. Select “No” on the first line with the “OK” button on the remote control. Press the “Menu” button on the remote control and turn off your PHILIPS TV LED 43PUS7303. Finally, turn on the TV.
There you go! You just have to set it up as you wish.
A password not deleted on PHILIPS TV LED 43PUS7303
You wanted to make a good deal by buying a second-hand PHILIPS TV LED 43PUS7303, but a nasty surprise awaits you when turning it on or configuring it: the former owner has locked the access with a password and has forgotten to tell you.
And give it to you! The easiest first step to unlock your PHILIPS TV LED 43PUS7303 password is to call back, or send a message to the former owner.
However, he or she may have forgotten it! In that case, do not get upset.
The default codes are 0000, 1234, 1111, 7777 or 9999.
Your television does not lock like a phone, you can try as many as you want.
If none of these works, you will have to take the user manual, or go to the website of the manufacturer of your PHILIPS TV LED 43PUS7303.
Then, go in its product sheet to download the manual.
In the help section, you will find a password to enter to redefine the password.
Enter it and redefine the password. Finally, in the settings of your television, deactivate your password.
To conclude on unlocking your PHILIPS TV LED 43PUS7303
We’ve just seen how to unlock your PHILIPS TV LED 43PUS7303.
However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step. We hope we helped you unlocking your PHILIPS TV LED 43PUS7303!
How do I unlock my Philips TV?
When TV LOCK is turned on in the TV menu, the prompt to enter the pin will appear on the screen each time when you turn on the TV.
Enter your pin code to view the channels.
If you have forgotten your pin code, enter the universal code ‘8888’.
How do I unlock my Philips TV without the remote?
– Turn your Philips TV on by plugging it into the power supply.
– Now, press the power button to turn the screen on.
– Press and hold the power button at least for 15 seconds.
– Release the button when the TV restarts.
What is the 4 digit code for my Philips TV?
When the prompt [Current Code] appears on the screen, enter the universal code 8888.
Then enter an easily remembered new 4-digit access code and enter the new code a second time for confirmation. Press the [Back] button to exit the menu.
How to Reset Phillips Smart TV – Factory Reset Easy Guide
11 ancillary questions
What is Philips code number?
The Phillips Code is a brevity code (shorthand) created in 1879 by Walter P. Phillips (then of the Associated Press) for the rapid transmission of press reports by telegraph.
It defined hundreds of abbreviations and initialisms for commonly used words that news authors and copy desk staff would commonly use.
How do you program a universal remote to a Philips TV?
Hold down the MAGIC key on your Philips remote.
Select the device you wish to connect your universal Philips remote control to. Finally, hold down the digit key to set up for your brand (Philips) and device.
As soon as the device turns off, you have to release the key and the LED on the remote will blink twice.
How do I program my universal remote to my TV without the code?
– Hold down the SET and Zero (0) buttons on your universal remote four times at the same time.
– You’ll then notice the LED light indicator (usually red) turns on steadily.
What is the pin code for smart TV?
What is the default PIN? The default PIN is set to 0000.
You can change or reset the PIN accordingly.
How do I lock my Philips TV?
– Press Settings (gear icon) on your remote.
– Select Child lock.
– Select Parental rating.
– Enter a 4-digit Child lock code (default code is 8-8-8-8)
– Select the age and press OK.
What is my Philips TV pin code?
Press the ‘DIGITAL TV/MENU’ button once to exit the menu. Note: If you have forgotten your personal 4-digit pin code and when the universal code (0711) is used, the system pin code will reset to the default code (1234) after you have switched off the TV and switched it on again.
How do I force a factory reset on my TV?
– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.
Where do I find my Smart TV PIN code?
– Turn on the TV, then press the Mute button.
– Press the + button, then press the Return button.
– Press the – button, then press the Return button.
– Press the + button again, then press the Return button, and the PIN should be reset to 0000.
How do I reset my TV without a remote?
How do I find my Philips TV code?
You can find the MediaConnect code from within the TV’s menu screen. Press [Menu] on the remote.
Then select [Setup]>[Software]>[MediaConnect code].
The code will be displayed on the right side of the screen.
What is the default PIN code for Philips?
If you are asked to enter a PIN code and have forgotten it, try one of the default PIN codes: 0000, 1111 or 1234. 1. Press the Home button on your remote control. 2.
You may also be interested in the following articles:
- How to connect your PHILIPS TV 32PHS4032
- How to record on PHILIPS TV LED 43PUS7303
- How to go online with a PHILIPS Philips 7000 Series 55PUS7502 – 139 cm – Smart TV LED – 4K UHD
You still have issues? Our team of experts and passionate could help you, feel free to contact us.