How to unlock your LISTO TV 48-LEDUSB-410

How to unlock your LISTO TV 48-LEDUSB-410

There are many situations that cause your LISTO TV 48-LEDUSB-410 to be blocked or locked. First, a few come from small simple technical problems.

Secondly, you may have retrieved a television from a hotel or hospital as they get rid of their old TVs.

In this case, it is blocked in “hotel” or “hospital” mode.

The last one is that you bought a used LISTO TV 48-LEDUSB-410 and a password is still saved on it.

In all these cases, we are here to help you solve your problem.

Here is how to unlock your LISTO TV 48-LEDUSB-410.

Simple technical problems locking your LISTO TV 48-LEDUSB-410

First, check that your remote has charged and ready-to-use batteries.

If so, also check the connections behind your television: are the cables all connected properly and are in good condition? Continue by checking that your boxes and decoders are running and functional.

If red or orange lights are on, this is a bad sign! Finally, you may have chosen to switch to the universal remote control. Unfortunately it may encounter difficulties with your LISTO TV 48-LEDUSB-410.

If this is the case, go to the website of the manufacturer of your remote control, and go in its product sheet.

Then, enter the code indicated by the Support team you have previously contacted.

LISTO TV 48-LEDUSB-410 locked in “hotel” or “hospital” mode

Hotels and hospitals sometimes change their television equipment and leave your future LISTO TV 48-LEDUSB-410 to the streets.

What a great deal! Until you realize, by turning on the television, that it is protected and thus locked by a “hotel” or “hospital” mode.

Find all the information about LISTO TV 48-LEDUSB-410 in our articles.

Do not panic! It is possible to unlock your LISTO TV 48-LEDUSB-410 locked in “hotel” or “hospital” mode! To do this, press the “Menu” buttons on the TV and the remote control simultaneously, starting with the menu button on the TV.

This for about 7 seconds.

The factory menu will appear.

Press the “Menu” button on the remote control again, then “OK” to select the line: “[Manufacturer name] hotel/hospital mode setup”.

You are in the hotel or hospital mode menu. Select “No” on the first line with the “OK” button on the remote control. Press the “Menu” button on the remote control and turn off your LISTO TV 48-LEDUSB-410. Finally, turn on the TV.

There you go! You just have to set it up as you wish.

A password not deleted on LISTO TV 48-LEDUSB-410

You wanted to make a good deal by buying a second-hand LISTO TV 48-LEDUSB-410, but a nasty surprise awaits you when turning it on or configuring it: the former owner has locked the access with a password and has forgotten to tell you.

And give it to you! The easiest first step to unlock your LISTO TV 48-LEDUSB-410 password is to call back, or send a message to the former owner.

However, he or she may have forgotten it! In that case, do not get upset.

The default codes are 0000, 1234, 1111, 7777 or 9999.

Your television does not lock like a phone, you can try as many as you want.

If none of these works, you will have to take the user manual, or go to the website of the manufacturer of your LISTO TV 48-LEDUSB-410.

Then, go in its product sheet to download the manual.

In the help section, you will find a password to enter to redefine the password.

Enter it and redefine the password. Finally, in the settings of your television, deactivate your password.

To conclude on unlocking your LISTO TV 48-LEDUSB-410

We’ve just seen how to unlock your LISTO TV 48-LEDUSB-410.

However, if you encounter any difficulty, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step. We hope we helped you unlocking your LISTO TV 48-LEDUSB-410!

How can I use my TV without a remote?

If your phone has IR blasterIR blasterAn infrared blaster (IR blaster) is a device that relays commands from a remote control to one or more devices that require infra-red remote control. For instance, it may also allow radio-frequency-based (RF) remotes (including those using Bluetooth) to control infra-red-based components.https://en.wikipedia.org › wiki › Infrared_blasterInfrared blaster – Wikipedia in-built, download a TV remote app. Not only it can control your TV, but also any device that can receive an IR signal.

Today’s smart TVs gave manufacturers apps.

Chances are if you have a smart TV there will be an app that will turn your phone into a remote.

How to Factory Reset Toshiba TV to Restore to Factory Settings

6 ancillary questions

How do I force a factory reset on my TV?

– Turn on the TV.
– Press the HOME button on the remote control.
– Select Settings.
– The next steps will depend on your TV menu options: …
– Select Factory data reset or Reset.
– Select Erase Everything.
– Select Yes.

How do I reset my TV without a remote?

– Unplug the TV power cord from the electrical socket.
– Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in.

How do I reset my LG TV to factory settings without password?

– Step 1: open the menu. Use the remote to open the menu.
– Step 2: open ‘All settings’ Select the option All settings in the list of options and press the OK button.
– Step 3: navigate to General. Select the options General.
– Step 4: go to Reset to Initial Settings.

Go down until you see the Revert to factory settings option.

Why does my TV say key lock?

Key locked message appears when pressing the button on TV body.

If key lock function is activated, TV is not operated by buttons on its body.

※ Only power button is working.

Set and cancel “key lock” mode with TV remote control, following below procedure.

How do you unlock a locked LG TV?

Locking/Unlocking Apps Press Home and then click Settings on the top right side of the Home.

Click the three dots button ►press Safety • Set Safety to On. Select the Application Locks.

Select the Applications to lock/unlock.

How do I unlock my LG TV without the password?

– Press the.

button on the remote control and select. at the top right.
– Move the focus to.

All Settings icon Safety Reset Password.
– Press.

Programmes.

Up.
– Enter the numbers “0313” in the master password input window, then press Enter.

The password will be reset.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.