How to set DTT channels on THOMSON 40FB5426

How to set digital terrestrial (DTT) channels on THOMSON 40FB5426

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV THOMSON 40FB5426.

This setting consists of a channel search on your THOMSON 40FB5426 so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on THOMSON 40FB5426

If you do not have a DTT adapter, here’s how to proceed: start by turning on your THOMSON 40FB5426, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your THOMSON 40FB5426.

For the next steps, please do not select “update” on your THOMSON 40FB5426!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of THOMSON 40FB5426, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your THOMSON 40FB5426.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via THOMSON 40FB5426

If you have a DTT adapter, here’s how to proceed: start by turning on your THOMSON 40FB5426, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about THOMSON 40FB5426 in our articles.

During the next steps, please do not select “update” on your THOMSON 40FB5426 as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your THOMSON 40FB5426.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your THOMSON 40FB5426

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on THOMSON 40FB5426 is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your THOMSON 40FB5426.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your THOMSON 40FB5426.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your THOMSON 40FB5426.

Start manual channel search on THOMSON 40FB5426

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your THOMSON 40FB5426!

To conclude on setting channels on your THOMSON 40FB5426

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your THOMSON 40FB5426.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.