How to set DTT channels on SAMSUNG UE40MU6105

How to set digital terrestrial (DTT) channels on SAMSUNG UE40MU6105

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV SAMSUNG UE40MU6105.

This setting consists of a channel search on your SAMSUNG UE40MU6105 so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on SAMSUNG UE40MU6105

If you do not have a DTT adapter, here’s how to proceed: start by turning on your SAMSUNG UE40MU6105, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your SAMSUNG UE40MU6105.

For the next steps, please do not select “update” on your SAMSUNG UE40MU6105!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of SAMSUNG UE40MU6105, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your SAMSUNG UE40MU6105.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via SAMSUNG UE40MU6105

If you have a DTT adapter, here’s how to proceed: start by turning on your SAMSUNG UE40MU6105, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about SAMSUNG UE40MU6105 in our articles.

During the next steps, please do not select “update” on your SAMSUNG UE40MU6105 as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your SAMSUNG UE40MU6105.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your SAMSUNG UE40MU6105

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on SAMSUNG UE40MU6105 is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your SAMSUNG UE40MU6105.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your SAMSUNG UE40MU6105.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your SAMSUNG UE40MU6105.

Start manual channel search on SAMSUNG UE40MU6105

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your SAMSUNG UE40MU6105!

To conclude on setting channels on your SAMSUNG UE40MU6105

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your SAMSUNG UE40MU6105.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

How do I scan for digital channels on my Samsung Smart TV?

– You can press the Source button on your remote and then select the source labeled TV.
– You can press Home, navigate to Menu, and then select Connected Devices.

From here you can select which source your TV is connected to.

What is DTV air on Samsung TV?

The digital television (DTV) transition refers to the switch from analog to digital broadcast television.

All full-power television stations have stopped broadcasting in analog, and now broadcast only in digital.

How do I put digital channels on my smart TV?

– On your Android TV, go to the Home screen.
– Scroll down to the “Apps” row.
– Select the Live Channels app.
– Press the Select button.
– Under “TV Options,” select Channel setup.
– Choose which channels you want to show up in your program guide.
– To return to your Live Channels stream, press the Back button.

How do I set up digital channels on my Samsung TV?

– 1 Press the Home button on your remote control and then select Menu.
– 2 Make sure the Antenna Cable is securely plugged into the TV or One Connect Box.
– 3 Choose Broadcasting then Expert Settings.
– 4 Select Manual Scan.
– 5 Choose Digital Channel Tuning.

How To Rescan Channels On A Samsung TV

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.