How to set DTT channels on LISTO TV 28 HD-2T-139

How to set digital terrestrial (DTT) channels on LISTO TV 28 HD-2T-139

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV LISTO TV 28 HD-2T-139.

This setting consists of a channel search on your LISTO TV 28 HD-2T-139 so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on LISTO TV 28 HD-2T-139

If you do not have a DTT adapter, here’s how to proceed: start by turning on your LISTO TV 28 HD-2T-139, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your LISTO TV 28 HD-2T-139.

For the next steps, please do not select “update” on your LISTO TV 28 HD-2T-139!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of LISTO TV 28 HD-2T-139, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LISTO TV 28 HD-2T-139.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via LISTO TV 28 HD-2T-139

If you have a DTT adapter, here’s how to proceed: start by turning on your LISTO TV 28 HD-2T-139, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about LISTO TV 28 HD-2T-139 in our articles.

During the next steps, please do not select “update” on your LISTO TV 28 HD-2T-139 as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LISTO TV 28 HD-2T-139.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your LISTO TV 28 HD-2T-139

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on LISTO TV 28 HD-2T-139 is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your LISTO TV 28 HD-2T-139.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your LISTO TV 28 HD-2T-139.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your LISTO TV 28 HD-2T-139.

Start manual channel search on LISTO TV 28 HD-2T-139

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your LISTO TV 28 HD-2T-139!

To conclude on setting channels on your LISTO TV 28 HD-2T-139

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your LISTO TV 28 HD-2T-139.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

LG webOS channel search (DVB-C,S,T) and sorting (LG 4K NanoCell TV 43″ – 86″ NANO75) instructions

7 ancillary questions

What are the standards for digital television?

These DTV standards include 480p,480i/p,720p and 1080i. p in 480i/p stands for “progressive” and i stands for “interlaced scanning”.

What is DTV terrestrial?

Terrestrial digital TV broadcasting is a new format of broadcasting that enables the viewer to receive higher quality video and audio signals than conventional analog TV, with no ghost images and no noise.

How does DTT TV work?

DTT is transmitted using radio frequencies through terrestrial space in the same way as the former analog television systems, with the primary difference being the use of multiplex transmitters to allow reception of multiple services (TV, radio stations or data) on a single frequency (such as a UHF or VHF channel).

What is the main standard for digital terrestrial TV DTT?

There are several standards for digital terrestrial television used throughout the world.

In the U.S., Canada and Mexico, the ATSC standard is used. DVB-T is used in Europe, Australia and most of Africa and Asia. Japan and most of South America use ISDB-T.

What does DTT mean in TV?

Digital Terrestrial Television

What is the difference between terrestrial and satellite TV?

The difference between satellite TV and aerial TV is that rather than the television broadcast being sent to a satellite in space then back down to satellite dishes on earth, television broadcasts are sent from a radio mast or tower on earth directly to the antenna you have at home.

What are DTT channels?

Digital terrestrial television (DTTV or DTT, or DTTB with “broadcasting”) is a technology for terrestrial television in which land-based (terrestrial) television stations broadcast television content by radio waves to televisions in consumers’ residences in a digital format.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.