How to set DTT channels on LG 55UJ670V LED 4K UHD HDR

How to set digital terrestrial (DTT) channels on LG 55UJ670V LED 4K UHD HDR

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV LG 55UJ670V LED 4K UHD HDR.

This setting consists of a channel search on your LG 55UJ670V LED 4K UHD HDR so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on LG 55UJ670V LED 4K UHD HDR

If you do not have a DTT adapter, here’s how to proceed: start by turning on your LG 55UJ670V LED 4K UHD HDR, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your LG 55UJ670V LED 4K UHD HDR.

For the next steps, please do not select “update” on your LG 55UJ670V LED 4K UHD HDR!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of LG 55UJ670V LED 4K UHD HDR, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 55UJ670V LED 4K UHD HDR.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via LG 55UJ670V LED 4K UHD HDR

If you have a DTT adapter, here’s how to proceed: start by turning on your LG 55UJ670V LED 4K UHD HDR, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about LG 55UJ670V LED 4K UHD HDR in our articles.

During the next steps, please do not select “update” on your LG 55UJ670V LED 4K UHD HDR as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 55UJ670V LED 4K UHD HDR.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your LG 55UJ670V LED 4K UHD HDR

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on LG 55UJ670V LED 4K UHD HDR is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your LG 55UJ670V LED 4K UHD HDR.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your LG 55UJ670V LED 4K UHD HDR.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your LG 55UJ670V LED 4K UHD HDR.

Start manual channel search on LG 55UJ670V LED 4K UHD HDR

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your LG 55UJ670V LED 4K UHD HDR!

To conclude on setting channels on your LG 55UJ670V LED 4K UHD HDR

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your LG 55UJ670V LED 4K UHD HDR.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

How do I get local channels on my LG Smart TV with antenna?

How do I tune my LG TV to satellite channels?

Using your “magic remote control”, press the “settings” button and navigate to your “all settings”. Under this menu, locate to “general”, “programmes” and to “programme tuning & settings”. Select the programme tuning models and your LGLGLG is a leading manufacturer of consumer and commercial products ranging from TVs, home appliances, air solutions, monitors, service robots, automotive components and its premium LG SIGNATURE and intelligent LG ThinQ brands are familiar names world over.https://www.lg.com › global › investor-relations-company-infoCompany Information | Investor Relations | LG Global TV will automatically tune for you to enjoy.

Why is my LG TV not picking up channels?

To troubleshoot the ‘not programmed’ issue on your LG TV, check your TV settings.

Go into the Menu, select “Settings,” and then go to “TV Inputs.” Make sure that the “Antenna” setting is selected.

If it’s not, select it and then scan for channels.

How do I get free channels on my LG TV?

First, connect an antenna or cable directly to the LG TV.

Then, depending on your TV, click Settings/Home on the remote control. Go to Channels, and select Auto Tuning.

If prompted to check your antenna connection, select Yes/OK.

Jailbreak your LG WebOS Based TV and enjoy the Homebrew Channel

10 ancillary questions

How do I get my LG TV to scan for channels?

Why is my smart TV not finding channels?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.

If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

Why is my LG TV not finding some channels?

If no channels are found, you may need to try a signal booster or antenna amplifier.

Depending on the distance between your home and the broadcasting station you may also need to purchase a stronger antenna.

How do I get antenna channels on my LG smart TV?

– Select ‘All Settings’ then press ‘OK’ on your remote control.
– Select ‘Programmes’
– Select ‘Programme Tuning & Settings’
– Select ‘Auto Tuning’.
– Select ‘Antenna’.

Make sure this is the only option selected.
– Select ‘Dignital Only Search’.

Why is my TV antenna not picking up channels?

If hills, trees, buildings, or other geographic features are in between the broadcast towers and the antenna, the signals might not be able to reach your antenna.

Elevating the antenna, either by placing it in a higher location or using a taller mast, will increase the signal reception.

Why is my antenna not connecting to my TV?

Reconnect all cables at the back of the TV or box, making sure that the cables are all properly connected (you want to avoid loose cables that could cause signal loss) and if you have a signal booster connected, try removing that and plug the antenna cable straight into your receiver, recorder or TV.

Why is my LG smart TV not picking up channels?

If you’re seeing the ‘Not Programmed’ message on your LG TV, it means that the device isn’t set up to receive any channels.

Several factors can cause this issue, including incorrect settings, a faulty antenna, choosing the wrong input, or attempting to access a feature with no signal.

How do I connect my LG smart TV to my antenna?

Why won’t my antenna work on my smart TV?

The signal being received may be weak.

If using an over-the-air antenna, make sure the coaxial cable connection is secure and don’t use a signal splitter.

The antenna may need to be adjusted to improve the signal quality.

If using cable or satellite, make sure the connection to the back of the TV is secure.

How do I get an antenna to work on my smart TV?

In most cases, you can take the antenna out of the box, connect the cable to your TV, run a channel scan, adjust the antenna for optimum reception and you’re good to go!

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.