How to set DTT channels on LG 55UJ630V

How to set digital terrestrial (DTT) channels on LG 55UJ630V

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV LG 55UJ630V.

This setting consists of a channel search on your LG 55UJ630V so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on LG 55UJ630V

If you do not have a DTT adapter, here’s how to proceed: start by turning on your LG 55UJ630V, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your LG 55UJ630V.

For the next steps, please do not select “update” on your LG 55UJ630V!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of LG 55UJ630V, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 55UJ630V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via LG 55UJ630V

If you have a DTT adapter, here’s how to proceed: start by turning on your LG 55UJ630V, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about LG 55UJ630V in our articles.

During the next steps, please do not select “update” on your LG 55UJ630V as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 55UJ630V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your LG 55UJ630V

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on LG 55UJ630V is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your LG 55UJ630V.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your LG 55UJ630V.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your LG 55UJ630V.

Start manual channel search on LG 55UJ630V

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your LG 55UJ630V!

To conclude on setting channels on your LG 55UJ630V

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your LG 55UJ630V.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

What does DTV mean on LG TV?

Digital television (DTV) is the transmission of television signals using a digital broadcast format rather than conventional analog methods.

How do I get free local channels on my LG TV?

How do I tune my LG TV to satellite channels?

Using your “magic remote control”, press the “settings” button and navigate to your “all settings”. Under this menu, locate to “general”, “programmes” and to “programme tuning & settings”. Select the programme tuning models and your LG TV will automatically tune for you to enjoy.

Why is my TV not picking up digital channels?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven’t already.

If your “No Signal” message is not due to incorrect Source or Input being selected, then it’s most likely caused by a set up or antenna fault.

How to Search Local Channels on LG Smart TV | Scan Antenna Channels

5 ancillary questions

How do I watch satellite on my LG TV?

– From the Programme Tuning & Settings Menu, select Programme Mode.
– Select Satellite.
– Select Satellite Settings (Here you will find your Satellite, LNB Frequency etc).

How do I know if my TV is DTV?

If your television has the words ATSC, DTV, Digital Ready, HD Ready, HDTV, Digital Tuner, Integrated Digital Tuner, or Digital Receiver printed on it, then it includes a digital tuner.

How do I connect my cable to my smart TV?

Connect the cable boxcable boxA cable converter box or television converter box is an electronic tuning device that transposes/converts channels from a cable television service to an analog RF signal on a single channel, usually VHF channel 3 or 4, or to a different output for digital televisions such as HDMI.https://en.wikipedia.org › wiki › Cable_converter_boxCable converter box – Wikipedia to your smart TV with an HDMI cable.

For a non-HDMI cable box connect the HDMI adapter to the end of the component cable that is plugged into your cable box then plug the HDMIM end into an available HDMI port.

Why is my LG TV not finding some channels?

If no channels are found, you may need to try a signal booster or antenna amplifier.

Depending on the distance between your home and the broadcasting station you may also need to purchase a stronger antenna.

Can you connect a satellite receiver to a smart TV?

Connect the HDMI cable from the receiver to your TV.

Turn on your TV and receiver.

Use the TV remote to change the input to the HDMI port that your receiver is connected to.

You should now see the receiver’s menu on your TV screen.

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.