How to set DTT channels on LG 43UJ630V

How to set digital terrestrial (DTT) channels on LG 43UJ630V

When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV LG 43UJ630V.

This setting consists of a channel search on your LG 43UJ630V so that these are received by your TV.

In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.

Automatic channel search without DTT adapter on LG 43UJ630V

If you do not have a DTT adapter, here’s how to proceed: start by turning on your LG 43UJ630V, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your LG 43UJ630V.

For the next steps, please do not select “update” on your LG 43UJ630V!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of LG 43UJ630V, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 43UJ630V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Automatic channel search with DTT adapter via LG 43UJ630V

If you have a DTT adapter, here’s how to proceed: start by turning on your LG 43UJ630V, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.

Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.

Then select “Installation”, or “Scan” or “Rescan” depending on your model.

Find all the information about LG 43UJ630V in our articles.

During the next steps, please do not select “update” on your LG 43UJ630V as previously stated!

After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.

A password can be requested, enter yours or the one written in the manual of your LG 43UJ630V.

It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.

At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…

Manual channel search on your LG 43UJ630V

It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on LG 43UJ630V is your solution! However, it is a complicated manipulation that takes a little more time.

If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.

If you do not have one, use the remote control of your LG 43UJ630V.

Retrieve channel’s canal number

To start the operation, you must have the canal number of the channel you wish to search manually on your LG 43UJ630V.

To do this, use the “My DTT coverage” search engine on the Ofcom official website.

Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.

You may then be able to watch it on your LG 43UJ630V.

Start manual channel search on LG 43UJ630V

Start by pressing “Menu” and go to “Configuration”.

It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.

Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.

The hardest is done, you can now go check the presence of the channel on your LG 43UJ630V!

To conclude on setting channels on your LG 43UJ630V

We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your LG 43UJ630V.

However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.

How do I get channels back on my LG TV?

– Select “Settings” on your remote.
– Scroll down to the “Advanced Settings” menu. ( Alternatively, you can hold down the settings button for five seconds to skip the quick menu)
– Select “Channels,” then “Channel Tuning”
– Your TV should begin to rescan.

Are IP channels free?

IPTV services provide you access to multiple TV channels using your internet connection. Some of the services are free while others will charge a monthly subscription fee.

IPTV services are typically cheaper than high priced cable subscriptions.

How do I program channels on my LG TV?

How do I get missing channels back on my TV?

Press “set-up” or “menu” on the TV remote control or converter box. Select “channels,” “antenna,” or other similar terminology.

Click “scan,” “auto-tune,” “channel search,” “auto-program,” or other similar terminology.

The TV will do the rest.

How to retune your LG Freeview TV

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.