How to set digital terrestrial (DTT) channels on GRUNDIG TV 55VLX7730BP
When DTT (Digital terrestrial television) updates, as in April 2016 when it launched HD channel access, you need to set up DTT channels on your TV GRUNDIG TV 55VLX7730BP.
This setting consists of a channel search on your GRUNDIG TV 55VLX7730BP so that these are received by your TV.
In this article we present how to search for channels in three major cases: automatic search without DTT adapter, automatic search with DTT adapter, and manual search in case of difficulties.
Automatic channel search without DTT adapter on GRUNDIG TV 55VLX7730BP
If you do not have a DTT adapter, here’s how to proceed: start by turning on your GRUNDIG TV 55VLX7730BP, and press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on the software installed on your GRUNDIG TV 55VLX7730BP.
For the next steps, please do not select “update” on your GRUNDIG TV 55VLX7730BP!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models of GRUNDIG TV 55VLX7730BP, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your GRUNDIG TV 55VLX7730BP.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Automatic channel search with DTT adapter via GRUNDIG TV 55VLX7730BP
If you have a DTT adapter, here’s how to proceed: start by turning on your GRUNDIG TV 55VLX7730BP, and press the “Source” or “Input” or “AV” button once or a few times until you are on the adapter’s screen.
Then press press the “Menu” button on your remote control. Select “Setup”, which can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setup Menu” or “System Setup”.
Then select “Installation”, or “Scan” or “Rescan” depending on your model.
Find all the information about GRUNDIG TV 55VLX7730BP in our articles.
During the next steps, please do not select “update” on your GRUNDIG TV 55VLX7730BP as previously stated!
After going to “Installation”, choose “Reinstall-Find All Channels” or “Automatic Search”. For some models, this may also be called “Erase Channels”, “Reset Channels”, or “Service Setup”.
A password can be requested, enter yours or the one written in the manual of your GRUNDIG TV 55VLX7730BP.
It is normal that a message warns you about the erasing of old channels, just accept and press “Start” or “Search”.
At the end of the channel search, select “Finish”, and check the presence of channels with for example BBC One at 1, BBC Two at 2, Channel 4 at 4…
Manual channel search on your GRUNDIG TV 55VLX7730BP
It may happen that after the automatic search, you no longer have your local channels or a main channel displays a black screen. No panic, manual channel search on GRUNDIG TV 55VLX7730BP is your solution! However, it is a complicated manipulation that takes a little more time.
If you have an adapter, connect to the screen of your adapter as seen above, and then follow the steps below.
If you do not have one, use the remote control of your GRUNDIG TV 55VLX7730BP.
Retrieve channel’s canal number
To start the operation, you must have the canal number of the channel you wish to search manually on your GRUNDIG TV 55VLX7730BP.
To do this, use the “My DTT coverage” search engine on the Ofcom official website.
Be careful, this is not the number you want to enter on the remote control to watch the channel but a canal number between 21 and 60 which indicates the frequency on which this channel is broadcast in your area.
You may then be able to watch it on your GRUNDIG TV 55VLX7730BP.
Start manual channel search on GRUNDIG TV 55VLX7730BP
Start by pressing “Menu” and go to “Configuration”.
It can also be called “Main Menu”, “System Menu”, “Tool Menu”, “Setting Menu”, or “System Settings”.
Then, select the “manual search” option and enter the canal number of the desired channel. Select “Ok” or “confirm”, or “exit”.
The hardest is done, you can now go check the presence of the channel on your GRUNDIG TV 55VLX7730BP!
To conclude on setting channels on your GRUNDIG TV 55VLX7730BP
We’ve just explained how to set DTT or “Digital terrestrial television”, channels on your GRUNDIG TV 55VLX7730BP.
However, if you encounter any difficulties, ask a professional who will show you the key steps of this manipulation.
How do I scan for DTV channels?
How do I scan channels on my Grundig TV?
– Select Setup, then Source , then go to Auto Search .
– Then you need to select cable or satellite .
– If you use satellite television, you must now select your satellite and then start the search.
– If you use cable TV, you can simply start the search.
How do I activate digital channels on my TV?
Turn on your television and locate the Settings menu. Look for a Cable/Antenna setting and choose Antenna. Look for an auto program or channel scan option and select it. Wait for your television to scan for channels.
What does it mean when your TV says please scan channels?
Your TV needs to scan for channels before it can show programming from an antenna, from cable TV when the cable comes directly from the wall (no cable box), or from a cable or satellite box connected to the TV with a coaxial (RF) cable.
How to scan terrestrial digital channels (DVB-T/T2) on Android TV? | GRUNDIG
6 ancillary questions
Do you have to have internet to stream TV?
Conclusion.
Yes, a smart TV can function without an internet connection. What is this? However, you will be unable to access its built-in apps or video streaming services like Netflix or Hulu.
How do you run a channel auto scan?
Can a smart TV pick up digital channels?
While smart TVs typically come with built-in antennas, they are used for Bluetooth or Wi-Fi connectivity — not for picking up free-to-air channels.
You can always try using a less sophisticated analog antenna, but there’s a good chance you’ll experience signal problems.
How do I get my channels back on my TV with an antenna?
To start, on your TV remote, select “Menu” and then “Settings.” Next, select “Channel Setup” and select “Antenna” or “Air,” depending on your TV.
Make sure you are not on “Cable.” Select “Channel Search” or “Channel Scan.” Keep in mind that steps to perform a channel scan may vary.
What input should TV be on for antenna?
Connect your antenna coaxial cable to the “Antenna In” jack on the back of your digital tuner box. Use a second coaxial cable to connect the “Out to TV” on the digital tuner box to the “Antenna In” on the back of the TV. Set the TV to Channel 3 or 4 as indicated on the back of your digital tuning device.
How do I set up auto scan channel?
You may also be interested in the following articles:
- How to connect your GRUNDIG TV LED 22VLE5520BG
- How to go online with a GRUNDIG TV 32VLE5503WG 200Hz PPR
- How to reset a normal color on GRUNDIG TV 32VLE5503WG 200Hz PPR
You still have issues? Our team of experts and passionate could help you, feel free to contact us.