How to reset sound and audio settings on THOMSON 32HS3101

How to reset the sound and audio settings on THOMSON 32HS3101

Sometimes the sound or audio system of your THOMSON 32HS3101 does not work properly.

There may be sound “beeps” from the television, no more sound at all, or the sound of your program is offset from the picture.

In any case, the experience is unpleasant for you! But do not lose patience, it is possible to put the sound on your THOMSON 32HS3101. We will see in this article solutions for each problem stated above.

A “beep” sound from your THOMSON 32HS3101

When you turn on your THOMSON 32HS3101, and use it, a “beep” sound disturbs your evening activity? This happens when a capacitor burns and interferes with the proper operation of your THOMSON 32HS3101. But do not worry, you can change it! Capacitors are electrical components essential to the start-up of an electronic object.

They are made of an insulation and two metal wires.

Be careful, if you do not feel comfortable with the following procedure, bring yourself closer to an expert who will help you for a reasonable price.

Be aware, this is a dangerous operation, and unless you are an expert, we do not advise you to do it yourself! To repair capacitors on THOMSON 32HS3101, you must disassemble to the back of your THOMSON 32HS3101 TV and disassemble the protective shell if the capacitors are not already visible.

When you see them, have a pair of pliers, and separate them from the TV. Next, place the capacitors, which you can buy for the price of a baguette in a store, in the right place and with the help of a welder, assemble them to your TV. Wait a few minutes for the capacitors to cool down.

No sound on your THOMSON 32HS3101

The first simple step in this case is to check if your TV, model THOMSON 32HS3101, and decoder are not “mute” or if the sound is not too low on each.

If this is not the problem, check the connections of your SCART or HDMi cable and those of your amps.

If all this does not work, and you do not have amps, try going to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal on your THOMSON 32HS3101.

Find all the information about THOMSON 32HS3101 in our articles.

Offset sound on THOMSON 32HS3101

You wanted to follow your favorite program when you realized that the sound did not match the image at all. Whether it’s early or late, it’s very disturbing for your viewer experience! Do not worry, here’s how to resize the sound to the image on your TV THOMSON 32HS3101.

Shifted sound from your THOMSON 32HS3101 on a channel only

When you have the sound offset to one, see two channels only, it is likely that either these channels are set to a foreign language sound channel.

If you watch a lot of programs in Original Version on your THOMSON 32HS3101, it may be your case.

To fix this, go to the channel with the problem.

Take the remote control of your decoder and press “Menu”, then “Language setting”.

In the “Audio” section displayed on the screen of your THOMSON 32HS3101, select the channel’s original language.

Here it is! The sound is normally set back on the picture!

Sound delay on your THOMSON 32HS3101

Some TVs like your THOMSON 32HS3101 have a “Sound delay” option.

If this has been set on your THOMSON 32HS3101, go to the “Menu” of your decoder, and go to “Settings”.

Then select “Picture & Sound”. Continue in “Sound Adjustment”, and deactivate Dolby Digital on the HDMI output by selecting “No”.

The sound must be returned to normal.

To conclude on reseting the sound and audio settings on THOMSON 32HS3101

We have just seen how to reset the sound on TV THOMSON 32HS3101.

However, if you encounter any difficulties, do not hesitate to ask for help from a friend. Or ask for help from a professional who will guide you step by step to reset the audio settings and sound on your THOMSON 32HS3101.

How can I hear better dialogue on my TV?

First look for something called “Dynamic Range Compression” (some TVs have an option called “Night Mode,” which is similar).

The idea of this setting is to even out (or compress) loud noises like explosions and softer ones like dialogue.

By bringing them closer together in volume, you will be able to hear words better.

How to fix Sound Issue on Thomson 9R Series 108cm (43 inch) Ultra HD (4K) LED Smart Android TV

8 ancillary questions

Is Dolby audio better than standard?

However, Dolby offers superior codec technology.

In layman’s terms, this means a more efficient sound compression system without compromising on quality.

What is Dolby audio on my TV?

Dolby Audio enables crystal clear audio so that you don’t miss a single detail.

It also features surround sound, automatic volume control, and enhanced volume.

Various High definition television (HDTV), digital cable and satellite broadcasts, as well as digital versatile discs (DVDs), all use Dolby Audio audio format.

Do all Smart TVs connect to Wi-Fi?

A smart TV uses your home network to provide streaming video and services on your TV, and will use either wired Ethernet or built-in Wi-Fi to stay connected.

Most current TVs support 802.11ac Wi-Fi, but watch for older models, which may still use the older 802.11n standard.

How do I know if my TV is connected to Wi-Fi?

You can find the internet connection settings on your smart TV by going to: Settings > General > Network > Open Network Settings OR Settings > Network > Open Network Settings.

How do I enable Dolby audio?

– Right-click the Speaker icon.
– Select Open Sound settings.
– Select Device properties.
– Select Additional device properties.
– Select the Dolby Audio tab.

Does Dolby Atmos improve audio quality?

‘ Dolby Atmos is an improvement on what came before and a leap forward from surround sound.

It’s ultimately designed to put you in the center of it all when watching movies or listening to music to give you the most immersive sound possible.

How do I activate Dolby audio on my TV?

– Open the Settings screen. Using the Quick Settings button (For models released in 2019 or later) …
– The next steps will depend on your TV menu options: Select Display & Sound → Audio output → Dolby Digital Plus output → Dolby Digital.

How do I get my smart TV to recognize my Wi-Fi?

You may also be interested in the following articles:

You still have issues? Our team of experts and passionate could help you, feel free to contact us.